Re: Strange networking issue

From: John Jolet (john.jolet_at_FXFN.COM)
Date: 04/30/03

  • Next message: Pugliese, Edward: "Re: Strange networking issue" 
    Date:         Wed, 30 Apr 2003 10:11:02 -0500
To: aix-l@Princeton.EDU

    can you set the switch to autonegotiate, then?

    -----Original Message-----
    From: Pugliese, Edward [mailto:s11018@SLK.COM]
    Sent: Wednesday, April 30, 2003 9:25 AM
    To: aix-l@Princeton.EDU
    Subject: Re: Strange networking issue

    Gigabit can't be set to 1000/full on AIX. Best is 1000/auto. Use 'entstat
    -d ent# | grep "Media Speed Running"' to see what speed/duplex the card is
    actually running at.

    -----Original Message-----
    From: John Jolet [mailto:john.jolet@FXFN.COM]
    Sent: Wednesday, April 30, 2003 10:13 AM
    To: aix-l@Princeton.EDU
    Subject: Re: Strange networking issue

    hard set the aix....if the switch isn't auto, don't set the aix box to auto.

    -----Original Message-----
    From: Willeat, Todd [mailto:TWilleat@MHP.SMHS.COM]
    Sent: Tuesday, April 29, 2003 3:51 PM
    To: aix-l@Princeton.EDU
    Subject: Re: Strange networking issue

    All switch ports are set to 1000/Full. All ports in Win2K are set to
    1000/Full. AIX is set to sense switch port. No errors/dropped packets are
    reported with entstat.

  • Next message: Pugliese, Edward: "Re: Strange networking issue"

    Relevant Pages

    • Re: Strange networking issue
      ... Leave the switch at 1000/full and set AIX to 1000/auto. ... I don't recommend the same procedure for any other card since they ... Subject: Strange networking issue ...
      (AIX-L)
    • Re: Strange networking issue
      ... Subject: Strange networking issue ... All switch ports are set to 1000/Full. ... AIX is set to sense switch port. ... not be coded properly to 1gb full on the AIX/ether switch/ WIN2K? ...
      (AIX-L)
    • Re: AIX 4.3.3 & FASTt 700 cannot see logical drive
      ... If you were not actually plugged in to the switch when the 6228 adapters ... [aix-l] AIX 4.3.3 & FASTt 700 cannot see logical drive ... If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments. ...
      (AIX-L)
    • question on configuring Etherchannel
      ... The ports show as up/connected on the switch, ... port-channel request from AIX). ... This email communication and any ...
      (AIX-L)
    • Re: Strange networking issue
      ... The SysKonnect card doesn't show that... ... Subject: Strange networking issue ... All switch ports are set to 1000/Full. ... AIX is set to sense switch port. ...
      (AIX-L)