7025-F50 FC problem

From: Gipson, Mat (Mat.Gipson_at_AMERICREDIT.COM)
Date: 07/23/03

  • Next message: Bill Verzal: "Re: 7025-F50 FC problem" 
    Date:         Wed, 23 Jul 2003 08:40:32 -0500
To: aix-l@Princeton.EDU

    7025-F50
    AIX5.1 ML4
    Problem: I have recently installed a 6227 FC adapter which is attached to a
    brocade switch which is attached to a 2105-F20. I have the latest Sdd and
    2105.rte filesets installed on the server. However when I run cfgmgr to add
    the LUNS to my system I get the following error:

    # cfgmgr
    Method error (/etc/methods/cfgscsidisk -l hdisk7 ):
            0514-068 Cause not known.
    Method error (/etc/methods/cfgscsidisk -l hdisk8 ):
            0514-068 Cause not known.

    Obviously the first thing that jumps out at me is that it is trying to
    configure it as a SCSI disk. Any insight anyone can offer is greatly
    appreciated.

    Thanks,
    Mathew Gipson
    matt.gipson@americredit.com <mailto:matt.gipson@americredit.com>
    817.525.7123

  • Next message: Bill Verzal: "Re: 7025-F50 FC problem"

    Relevant Pages

    • Re: Mount CD-ROM/DVD-RAM
      ... IBM Tech. support also suggested removing the drive and adapter after ... they were replaced and ran cfgmgr to re-discover the devices. ... Not sure why I need to re-export the CD-ROM/DVD-RAM ... Issue the 'mount' command to verify, ...
      (AIX-L)
    • Re: quantum tapeloader
      ... >> AIX cfgmgr had already added the library. ... >> Have you used cfgmgr since you loaded the Atape driver? ... Also there are two items on adapter 1Z-09 at scsi address 5,0 ... I think most of the lower end IBM and Dell libraries are made by ADIC. ...
      (comp.unix.aix)
    • Re: Install Gigabit Ethernet #2975 in H50?
      ... > Is there any drivers that I need to load? ... Or just as simple as cfgmgr? ... with lsdev -C check for adapter ... insert install medium end type cfgmgr -i ...
      (comp.unix.aix)
    • Re: replace HBA in p650 and FastT700
      ... boot server and cfgmgr ... The adapter is hot-plug. ... Holger ...
      (comp.unix.aix)
    • Anyone using SANnet II FC on N-Class...
      ... I am using a L2000 with a A5158A FC adapter ... connected to a Dothill SANnet II but when connected via Private_Loop I ... If I attach via a brocade switch in point to point ...
      (comp.sys.hp.hpux)