Re: Force HACMP IP take-over ?

From: Badger, Claude P (claude.badger_at_EDS.COM)
Date: 08/01/03

  • Next message: Bob Booth - UIUC: "Re: Force HACMP IP take-over ?"
    Date:         Fri, 1 Aug 2003 12:56:52 -0400
    To: aix-l@Princeton.EDU
    
    

            Try the event emulation facility in HACMP:

            smit swap_adapter.dialog

    -----Original Message-----
    From: Taylor, David [mailto:DTaylor@WBMI.COM]
    Sent: August 1, 2003 12:50 PM
    To: aix-l@Princeton.EDU
    Subject: Re: Force HACMP IP take-over ?

    I'm don't want to perform a test. We are in the middle of the
    production day. I want to move the IP address from one NIC to another,
    with as little impact on the users as possible.

    We are having some performance problems with the boot/service NIC in my
    cluster. I have nothing in errpt about it but, at the switch we are
    seeing a ton of "FCS" errors (don't really know what that it) The
    symptoms are horrible up stream (to the NIC) speed. Down stream hauls
    a**. We've verified duplex and speed settings on all equipment. Next
    test is to cable to a different port on the switch. If the behavior
    still exists I'm going to want to take the boot/service NIC out of the
    picture. I'm looking for the gentlest manner in which I can do this

    -----Original Message-----
    From: Bruce Harvey [mailto:BruceH@ROUTESCAPE.COM]
    Sent: Friday, August 01, 2003 11:44 AM
    To: aix-l@Princeton.EDU
    Subject: Re: Force HACMP IP take-over ?

    Yes, but you'd be watching a true take-over, rather than a manual
    transfer-of-power ... It'd be a truer test of the software's proper
    operation.

    ----------------------------------------
    bth@comcast.net -- bruceh@routescape.com
    443-465-1204 (personal) -- 410-403-2390 (office)
    -------------------------------------------

    -----Original Message-----
    From: Taylor, David [mailto:DTaylor@WBMI.COM]
    Sent: Friday, August 01, 2003 12:41 PM
    To: aix-l@Princeton.EDU
    Subject: Re: [aix-l] Force HACMP IP take-over ?

    That would work but would still be a bit disruptive. HACMP would have
    to determine that the NIC is no longer working and then move the address
    over. I'd like to tell HACMP to do it nicely.

    -----Original Message-----
    From: Bob Booth - UIUC [mailto:booth@UIUC.EDU]
    Sent: Friday, August 01, 2003 11:38 AM
    To: aix-l@Princeton.EDU
    Subject: Re: Force HACMP IP take-over ?

    Would

    ifconfig enX down

    work?

    bob

    On Fri, Aug 01, 2003 at 11:35:16AM -0500, Taylor, David wrote:
    > Is there a gentle method to cause my boot interface to fail-over to
    the
    > standby NIC? I know that I can force it by pulling the cable on the
    > boot adapter, or probably even with rmdev. I would like to do this in

    > the least disruptive manner as possible - while the system is still
    up.
    >
    >
    >
    > TIA
    >
    >
    >
    > David
    >
    >
    >
    >
    >
    > **********************************************************************
    > This email and any files transmitted with it are confidential and
    > intended solely for the use of the individual or entity to whom they
    > are addressed. If you have received this email in error please notify
    > the system manager.
    >
    > This footnote also confirms that this email message has been swept by
    > MIMEsweeper for the presence of computer viruses.
    >
    > www.mimesweeper.com
    > **********************************************************************
    >

    **********************************************************************
    This email and any files transmitted with it are confidential and
    intended solely for the use of the individual or entity to whom they are
    addressed. If you have received this email in error please notify the
    system manager.

    This footnote also confirms that this email message has been swept by
    MIMEsweeper for the presence of computer viruses.

    www.mimesweeper.com
    **********************************************************************

    **********************************************************************
    This email and any files transmitted with it are confidential and
    intended solely for the use of the individual or entity to whom they
    are addressed. If you have received this email in error please notify
    the system manager.

    This footnote also confirms that this email message has been swept by
    MIMEsweeper for the presence of computer viruses.

    www.mimesweeper.com
    **********************************************************************


  • Next message: Bob Booth - UIUC: "Re: Force HACMP IP take-over ?"

    Relevant Pages

    • Re: Force HACMP IP take-over ?
      ... Subject: Force HACMP IP take-over? ... Force HACMP IP take-over? ... > the system manager. ... > This footnote also confirms that this email message has been swept by ...
      (AIX-L)
    • Re: Force HACMP IP take-over ?
      ... Smitty hacmp -> Cluster System Management -> Swap Network Adapter ... Subject: Force HACMP IP take-over? ... If you have received this email in error please notify the system manager. ...
      (AIX-L)
    • Re: Force HACMP IP take-over ?
      ... Force HACMP IP take-over? ... > the system manager. ... If you have received this email in error please notify the ...
      (AIX-L)