Re: AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller
From: Bill Verzal (BVerzal_at_KOMATSUNA.COM)
Date: 10/20/03
- Previous message: Bill Verzal: "Re: Problems with connecting to AIX 5.2 box"
- Maybe in reply to: cbaker_at_GOODYEAR.COM: "AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller"
- Next in thread: cbaker_at_GOODYEAR.COM: "Re: AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 20 Oct 2003 12:43:04 -0500 To: aix-l@Princeton.EDU
According to the old IBM doc, the H70 required AIX 4.3.3 if I recall
correctly.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+---------------------------->
| | cbaker@GOODYEAR.C|
| | OM |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 10/20/2003 11:29 |
| | AM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
| |
| To: aix-l@Princeton.EDU |
| cc: |
| Subject: AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller |
>-------------------------------------------------------------------------------------------------------------------------------|
Ok, need some devices drivers for AIX 4.2.1 (Yes, you read right, that
was 4.2.1)
Had a H50 with additional drives in both its "six-packs". Took a mksysb of
it and installed it on an H70 that has one internal drive on scsi0 and
another drive on scsi1. When the system was done NIM'ing, it cannot see
hdisk1 nor scsi1. Do a cfgmgr and it complains as such:
H70# cfgmgr
Method error (/usr/lib/methods/cfgecpa -l ppa0):
0514-038 Error loading kernel extension.
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.pci.scsi:devices.pci.00100c00:devices.pci.0c000100
devices.pci.ssa:devices.pci.14109100:devices.pci.14105800:devices.pci.0c000c02
H70#
It has two SSA cards that we are NOT using. Why the "ppa0" error? Not
sure yet?
But the "devices.pci.scsi:devices.pci.00100c00:devices.pci.0c000100" is
what I think is the real problem. Until we get this fixed, cannot move the
extra (non-rootvg) drives from the H50 to the H70.
Here is what a similar H70 says in "lscfg -v" (can't do this on the H70
with AIX 4.2.1 since It does not show anything in lscfg -v)
scsi0 10-60 Wide/Fast-20 SCSI I/O Controller
Device Specific.(YL)........P2/Z1
hdisk0 10-60-00-6,0 16 Bit SCSI Disk Drive (9100 MB)
Manufacturer................IBM
Machine Type and Model......DGHS09U
FRU Number..................59H6926
ROS Level and ID............30334530
Serial Number...............6826A115
EC Level....................E31898
Part Number.................59H6816
Device Specific.(Z0)........000003029F00013A
Device Specific.(Z1)........GAGSPR603E
Device Specific.(Z2)........09RI
Device Specific.(Z3)........99153
Device Specific.(Z4)........0001
Device Specific.(Z5)........22
Device Specific.(Z6)........E31777
scsi1 10-88 Wide/Ultra-2 SCSI I/O Controller
Device Specific.(YL)........P2/Z2
hdisk1 10-88-00-8,0 16 Bit SCSI Disk Drive (9100 MB)
Manufacturer................IBM
Machine Type and Model......DGHS09U
FRU Number..................59H6926
ROS Level and ID............30334530
Serial Number...............68269599
EC Level....................E31898
Part Number.................59H6816
Device Specific.(Z0)........000003029F00013A
Device Specific.(Z1)........GAGSPR603E
Device Specific.(Z2)........09RI
Device Specific.(Z3)........99152
Device Specific.(Z4)........0001
Device Specific.(Z5)........22
Device Specific.(Z6)........E31777
From talking to a friend in IBM, it sounds like we might find the devices
drivers on either a later ML CD for 4.2.1 or the 4.2.1 Update CD. Have not
been able to find anything on IBM websites.
Any help, direction would be greatly appreciated.
BY THE WAY: Yes, we are planning on updating the OS. Need to get the box
up and running with non-rootvg drives first though.
Thanks,
Christopher M. Baker
Senior Technical Support Analyst
DSE/TCO
Goodyear Tire and Rubber Company
=================================================
Contains Confidential and/or Proprietary Information.
May not be copied or disseminated without the expressed
written consent of The Goodyear Tire & Rubber Company.
=================================================
- Previous message: Bill Verzal: "Re: Problems with connecting to AIX 5.2 box"
- Maybe in reply to: cbaker_at_GOODYEAR.COM: "AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller"
- Next in thread: cbaker_at_GOODYEAR.COM: "Re: AIX 421 device drivers for Wide/Ultra-2 SCSI IO Controller"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
