Antwort: Re: splstdata - command fails after migration from a node

fmu_at_OERAG.DE
Date: 10/27/03

  • Next message: Green, Simon: "Re: splstdata - command fails after migration from a node" 
    Date:         Mon, 27 Oct 2003 13:20:45 +0100
To: aix-l@Princeton.EDU

    Hi *!

    Sorry, I have forgotten to write it. I already check this and it shows o.k.

    # SDRGetObjects -G Node node_number==1
    node_number hdw_enet_addr frame_number slot_number slots_used
    switch_node_number switch_chip_port switch_chip switch_number
    initial_hostname reliable_hostname default_route boot_server bootdisk
    install_image install_disk last_install_time last_install_image
    switch_protocol switch_partition_number bootp_response boot_device
    usr_maint JM_domain_id VSD_adapter VSD_max_buffer_count
    VSD_request_blocks VSD_pbufs VSD_init_buffer_count
    VSD_min_buddy_buffer_size VSD_max_buddy_buffer_size VSD_max_buddy_buffers
    cfs_adapter acct_class_id acct_enable acct_job_charge acct_excluse_enable
    usr_server_ip usr_client_adapter has_usr_clients code_version
    usr_gateway_ip VSD_maxIPmsgsz lppsource_name processors_installed
    processor_type VSD_do_ip_checksum description platform
    hardware_control_type RVSD_version selected_vg dcehostname expansion_list
    on_switch primary_enabled LPAR_name
               1 02608C2D9329 1 1 2
    0 -1 -1 -1 charon charon_e
    100.100.1.5 0 hdisk1 helios_433_061201 hdisk0,hdisk1
    Thu_Oct_23_16:17:23_DFT_2003 helios_433_061201 IP 1
    disk "" false "" "" ""
    "" "" "" 4096 65536
    4 "" default default 1.0 false local
    "" false PSSP-3.5 0 24576 aix510
    1 UP false 135_MHz_P2SC_Wide rs6k 83 ""
    rootvg "" "" 0 false ""

    Best regards,
    Frank Mueller

                          Holger.VanKoll@SW
                          ISSCOM.COM An: aix-l@Princeton.EDU
                          Gesendet von: IBM Kopie:
                          AIX Discussion Thema: Re: splstdata - command fails after migration from a node
                          List
                          <aix-l@Princeton.
                          EDU>

                          27.10.2003 12:21
                          Bitte antworten
                          an IBM AIX
                          Discussion List

    splstdata is a shell-script, so invoking it with ksh -x might give more
    info

    or use SDRGetObjects Node to compare sdr-data of a working node with
    this one

    -----Original Message-----
    From: fmu@OERAG.DE [mailto:fmu@OERAG.DE]
    Sent: Monday, October 27, 2003 12:01 PM
    To: aix-l@Princeton.EDU
    Subject: splstdata - command fails after migration from a node

    Hi *,

    after the migration from one of our MCA wide nodes (AIX 4.3.3, PSSP
    3.2 --> AIX 5.1_ML03, PSSP 3.5), the splstdata-commands to this one
    fails.

    # splstdata -b -l 1
    splstdata: 0022-108 You have supplied an incorrect node: 3993.
    Usage: splstdata { -A | -a | -b | -d | -g | -h | -i | -n | -s | -u
    | -v | -x }
                    [ -G ] [ { start_frame start_slot { node_count | rest }
                    | -N node_group | -l <node_list> } ]
       OR
            splstdata { -e | -f | -p | -X }
    (root:hermes_e)[/]

    For all other nodes the command functions and works fine. Exactly
    the same good result I get when I start the command global over all
    nodes without the option '-l'

    Verification test works all (SDR_test, SYSMAN_test, spmon_itest,
    spmon_ctest, spmon -d, .....)

    The error code means that I have a wrong node number, but this isn't so.

    What can I do?

    Best regards,
     Frank Mueller

  • Next message: Green, Simon: "Re: splstdata - command fails after migration from a node"

    Relevant Pages