Re: Emulex LP 9002

From: jeff barratt-mccartney (jbarratt_at_COMPSAT.COM)
Date: 02/25/04

  • Next message: Green, Simon: "Re: DST Changes"
    Date:         Wed, 25 Feb 2004 11:34:39 -0500
    To: aix-l@Princeton.EDU
    
    

    don't know about the scsi card. what model?

    Here is an PCI ethernet (A-F)FC 4962 33Mhz 10/100 in a p650 pci-x slot. btw.
    this is from an IBM express config

     Name: ethernet
     Node: ethernet@1
     Device Type: network
     Physical Location: U0.2-P1-I6/E1

    working as expected

    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
    cbaker@GOODYEAR.COM
    Sent: Wednesday, February 25, 2004 11:00 AM
    To: aix-l@Princeton.EDU
    Subject: Re: Emulex LP 9002
    Importance: High

    Interesting?

    Late last year, we wanted to put a PCI SCSI card, we had once running in an
    H70, into a new IntelliStation Power 275 (9114-275) but found that the PCI
    card would not fit the PCI-X slots in the P275. So, we assumed that old
    PCI cards would not work in newer systems with PCI-X slots.

    Are we in error? Did we need some kind of adapter?

    Christopher M. Baker
    Senior Technical Support Analyst
    DSE/TCO
    Goodyear Tire and Rubber Company

    =================================================
    Contains Confidential and/or Proprietary Information.
    May not be copied or disseminated without the expressed
    written consent of The Goodyear Tire & Rubber Company.
    =================================================

                          jeff
                          barratt-mccartne To: aix-l@Princeton.EDU
                          y cc: (bcc: Chris
    Baker/NA/GDYR)
                          <jbarratt@COMPSA Subject: Re: Emulex LP 9002
                          T.COM>
                          Sent by: IBM AIX
                          Discussion List
                          <aix-l@Princeton
                          .EDU>

                          02/25/04 08:26
                          AM
                          Please respond
                          to IBM AIX
                          Discussion List

    yes. PCI-X is backwards compatible with PCI

    btw. I believe if you put the LP9002L card in a 32bit slot, it will
    negotiate at 1GB/sec also:
    remember that any PCI-X bus you put a card into will operate down to the
    lowest common denominator, so if you put a 33Mhz card in a PCI-X slot, all
    cards on that bus will run at 33Mhz

    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
    Ayman Rayyan
    Sent: Wednesday, February 25, 2004 7:18 AM
    To: aix-l@Princeton.EDU
    Subject: FW: Emulex LP 9002

    Dear all:

    I had found the compatible HBA card which is Emulex LP9002L & its
    supported by AIX 5.1, my notice is that this is a PCI 32 or 64 bit card
    while 650 & 630 are PCI-X, so does PCI-X slots supporting PCI cards ?

    -----Original Message-----
    From: Ayman Rayyan
    Sent: Wednesday, February 25, 2004 12:48 PM
    To: aix-l
    Subject: Emulex LP 9002

    Dear All:

    An any Pls. help to find the compatible emulex HBA to connect 650 & 630
    to symmetrix 8730 EMC storage ?


  • Next message: Green, Simon: "Re: DST Changes"

    Relevant Pages

    • Re: P5DL2 + Raid-5
      ... be sufficient for a RAID card. ... 6702PXH PCI Express to PCI-X bridge. ... PCI-X slots, unless you want to be a beta tester. ...
      (alt.comp.periphs.mainboard.asus)
    • Re: P5/Celeron comments?
      ... type of video capture card require. ... That restriction is caused by the mix of PCI Express and PCI ... which means a PCI bus card may get the "short straw". ... and you only get time slices from each camera. ...
      (alt.comp.periphs.mainboard.asus)
    • CRASH: SATA + 8139 + Via Rhine = STOP
      ... On the other side I have an 8139 based card. ... a Silicon Image Serial-ATA card on the PCI bus. ... raid5 personality registered as nr 4 ... md: Autodetecting RAID arrays. ...
      (Linux-Kernel)
    • [RFC / git patch] Move pci_find_* under CONFIG_PCI_LEGACY
      ... converting ancient drivers to PCI hotplug API, ... config HISAX_TELESPCI ... bool "NETspider U card" ... +#ifdef CONFIG_PCI_LEGACY ...
      (Linux-Kernel)
    • Re: Help: searching a video server that meets my requirements
      ... For basic composite capture, ... be BT878 chips. ... is a PCI to PCI bridge chip, so there aren't four loads and ... The above card will saturate a PCI bus, ...
      (rec.video.desktop)