SAN Adapter Stats

From: Darryl Ousterhout (D.Ousterhout_at_LABSAFETY.COM)
Date: 02/25/04

  • Next message: Bob Booth - CITES: "Re: Script-Permission" 
    Date:         Wed, 25 Feb 2004 15:19:29 -0600
To: aix-l@Princeton.EDU

    Is there any way to get throughput statistics on my fcs0 and fcs1
    adapters? This is on a P690 with both adapters attached to McData
    switches and then on to our ESS800.
     
    Thanks
    -Darryl

  • Next message: Bob Booth - CITES: "Re: Script-Permission"

    Relevant Pages

    • Re: FC adapters?
      ... I must have adapters for H80s and p650s. ... > redundant and the two 9216 switches are not cross-connected. ... they are compatible with 5716 HBA. ... I always saw yellow cables. ...
      (comp.unix.aix)
    • Re: Coping with FSCSI_ERR4 error
      ... >connected via separate pair of FC adapters and running multipathing ... >It seems improbable that all of adapters or cables or switches are ... I had simmilar errors in the past (though they never caused any ... too may resets/logins/logouts by the NT servers on the SAN. ...
      (comp.unix.aix)
    • Re: ADB Joystick on a GS
      ... they will still be digital (centered, half-scale up, half scale up ... It's a little more complicated than adapters for ... It's easy if the stick uses microswitches with three contacts (normally open/normally closed/common) and you can rewire it internally. ... Just put the two vertical switches in serial, with a resistor parallel to each of them. ...
      (comp.sys.apple2)
    • Clustering over GB Switches
      ... I currently have a 2-node cluster of ES40's running OpenVMS 7.3-1. ... adapters using two Fibre crossover cables. ... connection and onto the Switches. ...
      (comp.os.vms)
    • Re: 1Gbit Nic
      ... Some switches may not correctly auto-negotiate with the Intel® PRO/1000 ... Family of Gigabit Adapters. ...
      (microsoft.public.win2000.networking)