LTO drive install problems

From: David Zarnoch (David.Zarnoch_at_BISYS.COM)
Date: 06/25/04

  • Next message: Bill Verzal: "Re: LTO drive install problems" 
    Date:         Fri, 25 Jun 2004 11:34:22 -0500
To: aix-l@Princeton.EDU

    Folks,

    I have been trying to install an LTO1 drive on a 6H1 and am running into a problem...

    I have the drive terminated and set to ID 0. The drive is connected to an Ultra scsi
    port.
    I have loaded Atape ver 8.4.8
    Basically, after I run cfgmgr, the drive is not recognized and the following error
    message is displayed:

    IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
    825849BF 0625093804 T H fcs2 ADAPTER ERROR
    3074FEB7 0625093804 T H fscsi2 ADAPTER ERROR

    I know the cable is good since I have used it quite often.....

    Is there something I am forgetting?

    Thanks!

    Dave Zarnoch
    david.zarnoch@bisys.com

  • Next message: Bill Verzal: "Re: LTO drive install problems"

    Relevant Pages

    • Re: LTO drive install problems
      ... Ultra scsi ... port. ... I have loaded Atape ver 8.4.8 ... It appears that this error message is coming from the fiber channel adapter ...
      (AIX-L)
    • Re: Simple but confusing SCSI question...
      ... The Ultra SCSI Wide port and the Ultra SCSI port are in the ... middle of the other segment. ... another but are still a single channel. ...
      (comp.periphs.scsi)