Re: LTO drive install problems

From: Bill Verzal (BVerzal_at_KOMATSUNA.COM)
Date: 06/25/04

  • Next message: Bob Booth - CITES: "Re: LTO drive install problems" 
    Date:         Fri, 25 Jun 2004 11:41:38 -0500
To: aix-l@Princeton.EDU

    fcs2 is a 6227 or 6228 style Fiber Channel adapter. I'm confused.

    BV
    --------------------------------------------------------

    There are only 10 types of people in the world: Those who understand
    binary, and those who don't ...

    Bill Verzal
    Project Leader, Komatsu America

    (847) 970-3726 - direct
    (847) 970-4184 - fax

                 David Zarnoch
                 <David.Zarnoch@BI
                 SYS.COM> To
                 Sent by: IBM AIX aix-l@Princeton.EDU
                 Discussion List cc
                 <aix-l@Princeton.
                 EDU> Subject
                                           LTO drive install problems

                 06/25/2004 11:34
                 AM

                 Please respond to
                      IBM AIX
                  Discussion List
                 <aix-l@Princeton.
                       EDU>

    Folks,

    I have been trying to install an LTO1 drive on a 6H1 and am running into a
    problem...

    I have the drive terminated and set to ID 0. The drive is connected to an
    Ultra scsi
    port.
    I have loaded Atape ver 8.4.8
    Basically, after I run cfgmgr, the drive is not recognized and the
    following error
    message is displayed:

    IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
    825849BF 0625093804 T H fcs2 ADAPTER ERROR
    3074FEB7 0625093804 T H fscsi2 ADAPTER ERROR

    I know the cable is good since I have used it quite often.....

    Is there something I am forgetting?

    Thanks!

    Dave Zarnoch
    david.zarnoch@bisys.com

  • Next message: Bob Booth - CITES: "Re: LTO drive install problems"