Re: mksysb recovery problems

cbaker_at_GOODYEAR.COM
Date: 07/21/04

  • Next message: Kumar, Praveen (cahoot): "Re: Disks used by LV" 
    Date:         Wed, 21 Jul 2004 11:32:58 -0400
To: aix-l@Princeton.EDU

    Wait a minute.... Now I am confused. You just said:

    We are now attempting to boot into the SMS menu and change
    the bootlist to disk

    If the system has a *good* os on it, I assume you want to over-write that with a mksysb from another system? Or from a mksysb of this
    system before you made some change to it?

    So, if you intend on booting from the mksysb, why are you changing the bootlist to "disk" ?

    Christopher M. Baker
    Senior Technical Support Analyst
    DSE/TCO
    Goodyear Tire and Rubber Company

    =================================================
    Contains Confidential and/or Proprietary Information.
    May not be copied or disseminated without the expressed
    written consent of The Goodyear Tire & Rubber Company.
    =================================================

                 David Zarnoch <David.Zarnoch@BISYS.COM>
                 Sent by: IBM AIX Discussion List
                 <aix-l@Princeton.EDU> To
                                                                   aix-l@Princeton.EDU
                                                                                                                                       cc
                 07/21/04 10:50 AM
                                                                                                                                  Subject
                                                                   Re: mksysb recovery problems
                             Please respond to
                          IBM AIX Discussion List
                           <aix-l@Princeton.EDU>

    Folks,

    The system that we are trying to restore has an installed OS.

    We are now attempting to boot into the SMS menu and change
    the bootlist to disk

    BTW...The error we got on the mksysb boot was

    0>

    on the screen

    Dave

    >>> JKREMBLAS@REDHEARTGIFTS.COM 07/21/04 10:37AM >>>
    Wednesday, July 21, 2004, A.D.

    Good morning, Dave,

            It's unclear as to whether you are trying to boot from a mksysb
    TAPE or not as already appropriately addressed by Martin in an earlier
    response to your issue(s).

            If, in fact, you are trying to boot from a mksysb TAPE, AND you
    know this is the correct image for the machine you're trying to recover,
    then we can nip this little problem in the bud by simply changing your
    boot list on the machine. By default, the tape device is not part of the
    boot list. So, the plan is to boot from one of your CD-ROMs and change
    the boot list. Afterwards, we can mount the tape and reboot the system
    from the mksysb TAPE. The procedure that would guide me would look
    something like this:

            (1) Boot from CD-ROM.
            (2) Change boot list.
                    Command: bootlist -m normal rmt0 hdisk0
            (3) Power off machine.
            (4) Insert mksysb tape in tape drive.

            I hope this information helps, and good luck.

            Best wishes,

            Joseph Kremblas
            IBM Certified Advanced Technical Expert--RS/6000 AIX
            IBM Certified Specialist--pSeries AIX 5L Systems Support
            IBM Certified Specialist--pSeries AIX 5L Systems Administration
            IBM Certified Specialist--RS/6000 SP and PSSP
            IBM Certified Solutions Expert--WebSphere MQ/MQSeries
            IBM Certified Specialist--WebSphere MQ/MQSeries
            Phone: (623) 877-5722

            "Doubt is a pain too lonely to know that faith is his twin
    brother."

    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
    David Zarnoch
    Sent: Wednesday, July 21, 2004 6:19 AM
    To: aix-l@Princeton.EDU
    Subject: mksysb recovery problems

    Folks,

    We are trying to recover a box from a mksysb.

    We first tried to boot off the mksysb but it failed

    Then we tried to boot off CDROMs then access the
    mksysb but we got an error indicating that the operating
    system was different between the CDROMs and the mksysb
    (we suspect that the former admin used personal CDs to
    create the operating system that do not match the level
    we are using presently)

    Is there anything we can try?

    My boss is pretty hot about this...
    :0(

    Thanks!

    Dave Zarnoch
    david.zarnoch@bisys.com

  • Next message: Kumar, Praveen (cahoot): "Re: Disks used by LV"

    Relevant Pages

    • Re: VAX 11/730 SABACKUP questions
      ... The system disk died and has been replaced. ... I know how to boot SABACKUP from a TU58 or RL02, but I don't have a machine that I can use to generate media for them. ... the microcode from the TU58 tape. ...
      (comp.os.vms)
    • Re: VAX 11/730 SABACKUP questions
      ... The system disk died and has been replaced. ... Is there a way to boot a 730 from the TU80? ... someone set up to generate SABACKUP media on TU58 or RL02? ... the microcode from the TU58 tape. ...
      (comp.os.vms)
    • Re: Restoring from mksysb
      ... With an empty bootlist, it should boot from tape by default in service mode. ... The default is the disk at the location where the mksysb was made. ...
      (comp.unix.aix)
    • Re: VAX 11/730 SABACKUP questions
      ... The system disk died and has been replaced. ... I know how to boot SABACKUP from a TU58 or RL02, but I don't have a machine that I can use to generate media for them. ... the microcode from the TU58 tape. ...
      (comp.os.vms)
    • Fwd: Re: mksysb recovery problems MORE INFO
      ... To recover specific files from a backup made with mksysb, ... Said the tape was not in backup format ... We are now attempting to boot into the SMS menu and change ...
      (AIX-L)