Re: missing pv ID

From: Muthyam Reddy (MREDDY_at_JOY.COM)
Date: 08/26/04

  • Next message: Hass, Harold: "CIFS_FS install question" 
    Date:         Thu, 26 Aug 2004 15:58:38 -0400
To: aix-l@Princeton.EDU

    ** High Priority **

    Thanks Joseph and Jeff.

    Joseph, ultimately I used lquery commands to clear previous IDs on this disk after moving the disk to other node which is running aix5.2/SDD. After I moved back disk again to the node where I want to create VG which does not have SDD.

    Its work fine.
    Thanks both of you again.

    best regards
    muthyam

    >>> JNguyen@WM.COM 8/26/2004 2:50:54 PM >>>
    The command is installed from SDD driver. What is your OS and SDD level?

    devices.sdd.52.rte

    Joseph
    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
    Muthyam Reddy
    Sent: Thursday, August 26, 2004 1:35 PM
    To: aix-l@Princeton.EDU
    Subject: Re: missing pv ID

    ** High Priority **

    Hi Joseph,
    I cleared 'lquerypv -h /dev/hdiskXX' but I tried lquerypr -vh
    /dev/hdiskXX says command not found.

    thanks
    muthyam

    >>> JNguyen@WM.COM 8/26/2004 2:20:37 PM >>>
    Do you the LUN assigned to more than one hosts? or this LUN used to be
    assigned to some host with VG information. There may be SCSI reserved on the
    disk. The following commands would query and clear SCSI reserved if any.

    lquerypv -h /dev/hdiskXX
    lquerypr -vh /dev/hdiskXX
    lquerypr -cvh /dev/hdiskXX
    lquerypv -h /dev/hdiskXX

    Joseph
    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
    Muthyam Reddy
    Sent: Thursday, August 26, 2004 1:09 PM
    To: aix-l@Princeton.EDU
    Subject: Re: missing pv ID

    ** High Priority **

    no, its these since months ..its not new one.

    thank you.

    >>> jason.delafuente@GBE.COM 8/26/2004 2:01:27 PM >>>
    Did you just create the LUN on the Shark. I have had situations where AIX
    will discover the LUN but I cannot do anything with it until after it is
    done formatting.

    Jason de la Fuente

    >>> MREDDY@JOY.COM 08/26/04 12:21PM >>>
    ** High Priority **

    Hi ,
    I will be thankful if any one can deliver a fix on this,

    I am trying to create a volume group from LUN of shark storage. After I
    assign disk to the node and after cfgmr I system did not give PV ID ..i.e
    unable to create VG. I got some out from lsdev -C as available like any
    other disk. I got output ' PV ID not available' from lsattr -El hdisk11.

    I tried mkdev -l hdisk11 and mkvg with -f option .
    meanwhile I will search in docs.

    thanks .

    muthyam

    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++
    This electronic mail transmission contains information from Joy Mining
    Machinery
    which is confidential, and is intended only for the use of the proper
    addressee.
    If you are not the intended recipient, please notify us immediately at the
    return
    address on this transmission, or by telephone at (724) 779-4500, and delete
    this message and any attachments from your system. Unauthorized use,
    copying,
    disclosing, distributing, or taking any action in reliance on the contents
    of
    this transmission is strictly prohibited and may be unlawful.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++
    <<privacy>>

  • Next message: Hass, Harold: "CIFS_FS install question"

    Relevant Pages