Re: P520 HBA & DS4100
From: Alex Rozhitsky (ARozhitsky_at_CHECKFREE.COM)
Date: Thu, 19 May 2005 10:42:12 -0400 To: aix-l@Princeton.EDU
Try removing devices and re-running the cfgmgr.
CheckFree Investment Services
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
P520 HBA & DS4100
Please respond to
I have the following case:
I have one P520 with AIX V5.3, it has 2 HBA connected to 2 controller
(controller A & controller B) of the DS4100, the problem is that each LUN
on the DS4100 appear as 2 physical volume (ex. Hdisk2 & hdisk3) instead of
Any advice will be appreciate.
Thanks & Regards
Senior System Engineer
STS Group , Amman-Jordan
Tel: +962 6 5802626
Fax: +962 6 5829213
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.