Re: P520 HBA & DS4100

From: Vincent D'Antonio (dantoniov_at_gmail.com)
Date: 05/19/05

  • Next message: Lamar Saxon: "Re: P520 HBA & DS4100" 
    Date:         Thu, 19 May 2005 10:52:43 -0400
To: aix-l@Princeton.EDU

    Ayman,
    That is the way it should show up as it has to paths to the disk on
    diff. HBA's. Now you can get the software use to be SDD same as the
    shark and create vpaths and use the vpath to create VG's. Not sure
    what the software is today but ask your IBM rep he should be able to
    tell you.

    HTH
    Vince

    On 5/19/05, Ayman Rayyan <Ayman.Rayyan@sts.com.jo> wrote:
    >
    >
    > Hi Admins:
    >
    >
    >
    > I have the following case:
    >
    >
    >
    > I have one P520 with AIX V5.3, it has 2 HBA connected to 2 controller
    > (controller A & controller B) of the DS4100, the problem is that each LUN on
    > the DS4100 appear as 2 physical volume (ex. Hdisk2 & hdisk3) instead of one.
    >
    >
    >
    > Any advice will be appreciate.
    >
    >
    >
    >
    >
    > Thanks & Regards
    >
    > _______________________________________________
    >
    >
    >
    > Ayman Rayyan
    >
    > Senior System Engineer
    >
    >
    >
    > STS Group , Amman-Jordan
    >
    > Tel: +962 6 5802626
    >
    > Fax: +962 6 5829213
    >
    > Ayman.Rayyan@sts.com.jo
    >
    > http://www.sts.com.jo
    >
    > This email and any files transmitted with it are confidential and intended
    > solely for the use of the individual or entity to whom they are addressed.
    > If you have received this email in error please notify the system manager.
    > This message contains confidential information and is intended only for the
    > individual named. If you are not the named addressee you should not
    > disseminate, distribute or copy this e-mail.

  • Next message: Lamar Saxon: "Re: P520 HBA & DS4100"

    Relevant Pages