Antwort: Re: What is the way to observe network traffic on a RS/6000 Adapter?

fmu_at_OERAG.DE
Date: 06/23/05

  • Next message: Denis Garrido Mendes: "Re: Antwort: Re: What is the way to observe network traffic on a RS/6000 Adapter?" 
    Date:         Thu, 23 Jun 2005 18:42:01 +0200
To: aix-l@Princeton.EDU

    Hm,

    with tcpdump -i <interface>
    I don't see the average network traffic and also no peak.

    # tcpdump -i en0
    tcpdump: listening on en0
    18:34:29.711055834 charon_e.32851 > styx_e.hats.hermes_e: udp 76
    18:34:29.712416916 styx_e.hats.hermes_e > medusa_e.hats.hermes_e: udp 76
    18:34:29.763647374 phoenix_e.32862 > pegasus_e.hats.hermes_e: udp 76
    18:34:29.928263936 ikarus_e.hats.hermes_e > charon_e.hats.hermes_e: udp 76
    18:34:30.008060807 phoenix_e.hats.hermes_e > pegasus_e.hats.hermes_e: udp
    76

                                                                               
                 Mark Ray
                 <raym@US.IBM.COM>
                 Gesendet von: IBM An
                 AIX Discussion aix-l@Princeton.EDU
                 List Kopie
                 <aix-l@Princeton.
                 EDU> Thema
                                            Re: What is the way to observe
                                            network traffic on a RS/6000
                 23.06.2005 18:05 Adapter?
                                                                               
                                                                               
                  Bitte antworten
                        an
                      IBM AIX
                  Discussion List
                 <aix-l@Princeton.
                       EDU>
                                                                               
                                                                               

    Frank:

    One of the better network traffic monitors is "tcpdump". The basic syntax
    is 'tcpdump -i ,<interface>'
    Note that, "netpmon" is more granular, but running it will incur a
    significant performance hit on
    your systems.

    Mark Ray
    IBM

                 fmu@OERAG.DE
                 Sent by: IBM AIX
                 Discussion List To
                 <aix-l@Princeton. aix-l@Princeton.EDU
                 EDU> cc

                                                                       Subject
                 06/23/2005 11:53 What is the way to observe network
                 AM traffic on a RS/6000 Adapter?

                 Please respond to
                      IBM AIX
                  Discussion List

    Hi,

    on one of our SP node (AIX 5.2) runs a DB2 database (V8). All 120 clients
    (Windows) works with this database and they are connect over 100MBit
    Ethernet cards in our network.

    Now we want the same application build again. But now the server is in
    another location/city than the clients and we must work over a WAN and not
    a LAN.

    But I do not know the capacity which we need for the WAN or how big must
    the line from city to city.

    I reset the adapter statistik and check the output after 7h with entstat.
    Here the result for en1 and en2:

    -------------------------------------------------------------
    ETHERNET STATISTICS (en1) :
    Device Type: Gigabit Ethernet-SX PCI Adapter (14100401)
    Hardware Address: 00:02:55:9a:54:e9
    Elapsed Time: 0 days 7 hours 18 minutes 18 seconds

    Transmit Statistics: Receive Statistics:
    -------------------- -------------------
    Packets: 1755437 Packets: 398349
    Bytes: 2633851309 Bytes: 24161670
    Interrupts: 5307 Interrupts: 358738
    Transmit Errors: 0 Receive Errors: 0
    Packets Dropped: 0 Packets Dropped: 0
                                                  Bad Packets: 0
    Max Packets on S/W Transmit Queue: 77
    S/W Transmit Queue Overflow: 0
    Current S/W+H/W Transmit Queue Length: 0

    -------------------------------------------------------------
    ETHERNET STATISTICS (en3) :
    Device Type: Gigabit Ethernet-SX PCI Adapter (14100401)
    Hardware Address: 00:02:55:9a:54:e5
    Elapsed Time: 0 days 2 hours 53 minutes 8 seconds

    Transmit Statistics: Receive Statistics:
    -------------------- -------------------
    Packets: 1535981 Packets: 1067630
    Bytes: 1853344547 Bytes: 199525044
    Interrupts: 29289 Interrupts: 1042437
    Transmit Errors: 0 Receive Errors: 0
    Packets Dropped: 0 Packets Dropped: 0
                                                  Bad Packets: 0
    Max Packets on S/W Transmit Queue: 105
    S/W Transmit Queue Overflow: 0
    Current S/W+H/W Transmit Queue Length: 3

    When I calculte the bytes (for example Transmit) I get for en1 99 MByte/s
    and for en3 56 MByte/s
    I think that is very high and I want now control this values with a other
    tool?
    And this is the average and not a peak.

    Is this possible?

    Best regards,
     Frank Mueller

  • Next message: Denis Garrido Mendes: "Re: Antwort: Re: What is the way to observe network traffic on a RS/6000 Adapter?"

    Relevant Pages