help - SP2's node lost network connection

From: Julie Xu (J.Xu_at_UWS.EDU.AU)
Date: 07/30/05

  • Next message: Tony Gallo: "Re: help - SP2's node lost network connection" 
    Date:         Sun, 31 Jul 2005 06:39:48 +1000
To: aix-l@Princeton.EDU

    Greeting,

    The first node in my SP2/AIX4.2.0 has lost network connection:
         I can ping itself
         netstat -nr can see all the routes
         netstat -i can see the interface en0
         ifconfig en0 shows the interface is up
         
    But, errors:
    sp1#ifconfig -a
    0821-515 ifconfig: error loading /usr/lib/drivers/if_-a: A file or directory in the path name does not exist.

    and
    arp -a can not see cws.

    Is any problem on drivers? or hardware?

    Any comments will be appreciated

    Thanks in advance

    Julie

  • Next message: Tony Gallo: "Re: help - SP2's node lost network connection"

    Relevant Pages

    • using 2nd network interface - wont try to TX anything
      ... I'm trying to make use of a 2nd ethernet interface. ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ... TX bytes is 0 for ixp2 despite attempts to ping the other host on that LAN ... 17:39:11.723759 arp who-has 172.30.2.3 tell 172.30.2.1 ...
      (comp.os.linux.networking)
    • Re: multi-homed systems stop answering ARP on local addresses w/ifconfig aliases
      ... multi-homed systems stop answering ARP on local addresses ... hence anything on that network completely stops functioning. ... routing to a locally assigned address via another interface, ... you can't even ping the affected locally ...
      (freebsd-net)
    • Re: PIX: Ping VPN host from inside network
      ... to ping hosts in the vpn subnet pool or vice-versa. ... The same capture applied to the outside interface shows pings heading ... access-list inside_nat0_outbound extended permit ip any 192.168.24.0 ... access-group outside_access_in in interface outside ...
      (comp.security.firewalls)
    • Re: ebtables processing...
      ... I can no longer ping the router. ... The client wants to send an IP packet with an ICMP echo request to 192.168.1.1. ... Before it must learn the associated MAC address using the ARP protocol, ... The ARP query arrives at the interface eth0, which is part of the bridge br0, so the packet goes through ebtables and reaches the BROUTING chain in the broute table. ...
      (comp.os.linux.networking)
    • Re: Dropped packets via ISR
      ... I also used ping plotter... ... Tried changing from full duplex to half duplex to auto and that did ... "1) Interface MTU at 1500 is fine. ...
      (comp.dcom.sys.cisco)