Re: HMC for P5

From: Ayman Rayyan (Ayman.Rayyan_at_STS.COM.JO)
Date: 09/16/05

  • Next message: alweston: "Re: Non interactive ftp" 
    Date:         Fri, 16 Sep 2005 20:44:49 +0300
To: aix-l@Princeton.EDU

     

    Hi all:

     

    I had the same case, but IBM did not tell that I need the KVM.

    I had connect 2X P550, each with 2 LPAR & the HMC station to a switch
    using HMC port at the P550. They connect to each other by DHCP where is
    the HMC is the DHCP server.

     

    ..... Hope this will help :-)

     

     

    Thanks & Regards

    _______________________________________________

     

    Ayman Rayyan

    ________________________________

    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
    Vincent D'Antonio
    Sent: Thursday, September 15, 2005 7:47 PM
    To: aix-l@Princeton.EDU
    Subject: Re: HMC for P5

     

    What I am being told is that I have 30 P5 servers to connect to one HMC
    using a TF3 keyboard, mouse, and display rack mounted. Because of this
    I need a KVM FC7316 with FC4202 cables.

     

    I still don't see the need for this but IBM says it is a recommend
    setup?

     

    Thanks

    Vince

     

    On 9/15/05, BRUCE HARVEY <btharvey@mandtbank.com> wrote:

    It does not use a KVM ... it uses a monitor, keyboard/mouse
    (touchpad/button), since it is a graphical interface. No KVM, though it
    could use it I suppose, and its monitor/keyboard/etc.

     

    The connections are via private LAN (literally a switch or hub connected
    to the different systems and the HMC), rather than the old P4 serial
    connections. Serial ports on the target system are still unavailable,
    however. Don't get that, but whatever.

     

    Bruce

    >>> "Vincent D'Antonio" <dantoniov@gmail.com> 09/15/05 11:20 AM >>>
     

    Need your help,

     

    I would like to start using an HMC to manage my P5 servers, with the
    lastest code we can connect up to 48 servers non-P590/P595.

     

    The question I have is that I see that it uses a KVM switch and can't
    figure out why it needs one? I read though the redbook (alittle out of
    date) but it doesn't talk about the KVM.

     

    Anyone using an HMC for P5 can shed some light on this that would be
    great.

     

    Thanks in advance,

    Vince

     

    This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.

  • Next message: alweston: "Re: Non interactive ftp"
    • Quantcast