Re: Memory added but not all being recognized

From: Justin Bleistein (justin.bleistein_at_TOWERSPERRIN.COM)
Date: 09/22/05

  • Next message: Hunter, Mark: "Re: Sendmail Core Dumps and Compiling Sendmail 8.11.7 on AIX 5.2 ml6" 
    Date:         Thu, 22 Sep 2005 15:10:39 -0400
To: aix-l@Princeton.EDU

    Also, see if you can see them from the service processor menus. They could
    be in error and have been disabled. You'll have to re-enable
    them again via the SP. Also, even if you have the same type of hardware,
    (same FRU), let's go back to hardware 101, you need to install
    them methodically...
    Thanks.

    --Justin Richard Bleistein
     AIX Systems Administrator

    "Lindsey, James" <James.Lindsey@BCBSFL.COM>
    Sent by: IBM AIX Discussion List <aix-l@Princeton.EDU>
    09/22/2005 02:54 PM
    Please respond to
    IBM AIX Discussion List <aix-l@Princeton.EDU>

    To
    aix-l@Princeton.EDU
    cc

    Subject
    Re: Memory added but not all being recognized

    Are all memory sticks the same FRU #? There are issues with certain
    part #'s that do not work with others. I wish I could give you more
    specifics but I cannot find my little cheat *** that specifies each of
    the subtle differences.
     
    James
    -----Original Message-----
    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
    Mark Schlechte
    Sent: Thursday, September 22, 2005 2:31 PM
    To: aix-l@Princeton.EDU
    Subject: Re: Memory added but not all being recognized

    size and goodsize match. Yes only one memory card which supports 16
    DIMM's.
    I did look at the DIMMs initially and they do all appear to have IBM
    logo's on them not sure if there is any subtle differences or not but I
    may have to look a little closer and try 1Gb at a time as you suggest.

    >>> EPugliese@NYBOT.COM 09/22/05 12:17 pm >>>
    On the output of 'lattr -El mem0', does size and goodsize match ?
     
    I assume all your DIMMS are on the first card which supports 16 DIMMS ?
     
    Are the new DIMMS the same as the old (from IBM)? Try testing 1GB at a
    time to see if any problems with certain DIMMS.

    From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
    Mark Schlechte
    Sent: Thursday, September 22, 2005 1:53 PM
    To: aix-l@Princeton.EDU
    Subject: Memory added but not all being recognized

    I have a 44P-270 with 1GB of ram. It had 4 - 246MB DIMMS (IBM PN 4019).
    I added another 12 - 256 MB DIMMS to bring it up to 4096MB.
    After powering it up it now only recognizes 2048MB so I'm 2GB short.
    (Boot screen shows 2048MB and lsattr -El mem0 also just shows 2048).
     
    I've pulled out the memory card and reseated the memory DIMM's I just
    added.
    Same result.
     
    Am I missing anything here that will stop the server from recognizing the
    extra memory?
     
    This is AIX 4.3.3 if that makes a difference.
     
    Mark
     

    DISCLAIMER: The information transmitted is intended only
    for the addressee and may contain confidential,
    proprietary and/or privileged material. Any
    unauthorized review, distribution or other use
    of or the taking of any action in reliance upon
    this information is prohibited. If you received
    this in error, please contact the sender and
    delete or destroy this message and any copies.
    "This e-mail and any attachments may contain confidential and privileged
    information. Any dissemination or use of the information by a person other
    than the intended recipient is unauthorized and may be illegal. If you are
    not the intended recipient, please notify the sender immediately by return
    e-mail, delete this e-mail and destroy any copies. Although this e-mail
    and any attachments are believed to be free of any virus or other defect
    that might affect any computer system into which it is received and
    opened, it is the responsibility of the recipient to ensure that it is
    virus free and no responsibility is accepted by the Board of Trade of the
    City of New York, Inc. or the New York Clearing Corporation for any loss
    or damage arising in any way from its use. Thank you."
     

    DISCLAIMER: The information transmitted is intended only
    for the addressee and may contain confidential,
    proprietary and/or privileged material. Any
    unauthorized review, distribution or other use
    of or the taking of any action in reliance upon
    this information is prohibited. If you received
    this in error, please contact the sender and
    delete or destroy this message and any copies.
    Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate
    companies are not responsible for errors or omissions in this e-mail
    message. Any personal comments made in this e-mail do not reflect the
    views of Blue Cross Blue Shield of Florida, Inc. The information contained
    in this document may be confidential and intended solely for the use of
    the individual or entity to whom it is addressed. This document may
    contain material that is privileged or protected from disclosure under
    applicable law. If you are not the intended recipient or the individual
    responsible for delivering to the intended recipient, please (1) be
    advised that any use, dissemination, forwarding, or copying of this
    document IS STRICTLY PROHIBITED; and (2) notify sender immediately by
    telephone and destroy the document. THANK YOU.

  • Next message: Hunter, Mark: "Re: Sendmail Core Dumps and Compiling Sendmail 8.11.7 on AIX 5.2 ml6"
    • Quantcast