Re: booting and fiber disks

Yes,

When we tried to set the boot device in the SMS menu, it still scanned all
of the fibre disks.

Anyway around this?

Dave Zarnoch
Nationwide Provident
zarnocd@xxxxxxxxxxxxxxxxxxxxxxx
W 302-452-4197
C 302-462-8703



Holger.VanKoll@SW
ISSCOM.COM To: aix-l@xxxxxxxxxxxxx
Sent by: IBM AIX cc:
Discussion List Subject: Re: booting and fiber disks
<aix-l@Princeton.
EDU>


01/23/2006 09:46
AM
Please respond to
IBM AIX
Discussion List






>Even though the bootlist only contains cd0, it will still search every
single fibre attached diskin order to boot

are you sure it tried to boot from every san-disk?

or was the box just scanning its devices, which is/works as designed?


>(We also disconnected the fiber and the boot just hung)
strange... did you try to setup/choose the boot-device directly in the
sms-menus?


-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Dave Zarnoch
Sent: Monday, January 23, 2006 3:31 PM
To: aix-l@xxxxxxxxxxxxx
Subject: booting and fiber disks

We had some problems booting from cd0 on a box that has a fiber
connection to an EMC box.

Even though the bootlist only contains cd0, it will still search every
single fibre attached diskin order to boot

Is there a way around this?

(We also disconnected the fiber and the boot just hung)

Thanks!



Dave Zarnoch
Nationwide Provident
zarnocd@xxxxxxxxxxxxxxxxxxxxxxx

Relevant Pages

  • Re: booting and fiber disks (SUMMARY)
    ... Dave Zarnoch ... system is not scanning the disks for another boot device, ... I'm not sure what happened when you disconnected the fiber: ... Subject: Re: booting and fiber disks ...
    (AIX-L)
  • Booting AIX 5.1 on fibre attached external storage
    ... I wanted to see if anyone had any feedback on booting AIX 5.1 on fibre ... attached external storage. ... We are looking to boot AIX5.1 ml3 on a ...
    (comp.unix.aix)
  • Re: Booting P670 off Clariion with FC 6239
    ... > don't boot from fiber at our shop, but I did try it just for fun. ... > Zone 2 disk to the server, one on one path, the other on the other path. ... MPIO allows boot support. ...
    (comp.unix.aix)
  • Re: booting and fiber disks
    ... If no boot file system is detected ... Dave Zarnoch ... it is normal for this hardware to scan all devices when booting up. ... Subject: Re: booting and fiber disks ...
    (AIX-L)
  • Re: booting and fiber disks
    ... The scan doesn't imply booting up from that device. ... Put a LUN with a valid boot image, and set the boot list via the SMS ... Subject: Re: booting and fiber disks ... Dave Zarnoch ...
    (AIX-L)