Re: NIM push latency
- From: "Page, Jennifer (RBC Dain)" <Jennifer.Page@xxxxxxxxxxx>
- Date: Fri, 3 Feb 2006 15:43:34 -0600
Just to clarify:
What jobs from the master are slow:
-nim install
-nim reboot/reset
-nim showlog
-*all
________________________________
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Taylor, David
Sent: Friday, February 03, 2006 1:53 PM
To: aix-l@xxxxxxxxxxxxx
Subject: FW: NIM push latency
One additional piece of information that I forgot - lsnim -l <client>
on the master shows that the Cstate doesn't change from "ready for NIM
operation" to "BOS installation enabled" until about 10-15 minutes of
wait (roughly 5 minutes before any events occur on the client).
Thanks again
David
-----Original Message-----
From: Taylor, David
Sent: Friday, February 03, 2006 1:44 PM
To: AIX list
Subject: NIM push latency
Hi *
I am experiencing a latency of about 15-20 minutes prior to execution of
any NIM actions that I push from my master. This is a completely virgin
environment - I installed both servers from the base 5.3 ML0 CDs and
built the NIM master yesterday. I have defined only a single spot and
lpp_source from the same CDs I installed with. Everything works fine
and at very acceptable speeds - once they get going. However anytime I
push a job from the master, literally NOTHING happens (running topas on
both master and client) for 15-20 minutes. I've even used the scheduler
within the smitty nim_bosinst screens to schedule the job for one minute
in the future but, it appears that after the one minute, it begins the
15-20 minute wait.
I don't see any other symptoms. They can resolve each other fine.
.rhosts is configured properly (I'm using rsh rather than nimsh because
once I get everything figured out, I will be setting it up in a mixed
environment). The network speed is fine - averaging 70 MB/sec in FTP.
These are the only two servers on this network.
Can anyone point me to what may be causing this delay before execution?
TIA
David
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.clearswift.com
**********************************************************************
RBC Dain Rauscher does not accept buy, sell or cancel orders by e-mail, or any instructions by e-mail that would require your signature. Information contained in this communication is not considered an official record of your account and does not supersede normal trade confirmations or statements. Any information provided has been prepared from sources believed to be reliable but is not guaranteed, does not represent all available data necessary for making investment decisions and is for informational purposes only.
This e-mail may be privileged and/or confidential, and the sender does not waive any related rights and obligations. Any distribution, use or copying of this e-mail or the information it contains by other than an intended recipient is unauthorized. If you receive this e-mail in error, please advise me (by return e-mail or otherwise) immediately.
Information received by or sent from this system is subject to review by supervisory personnel, is retained and may be produced to regulatory authorities or others with a legal right to the information.
E-mail messages are not encrypted. As such, client sensitive information sent to or received from your RBC Dain Rauscher Financial Consultant electronically may not be secure.
- Prev by Date: FW: NIM push latency
- Next by Date: Re: NIM push latency
- Previous by thread: FW: NIM push latency
- Next by thread: Re: NIM push latency
- Index(es):
Relevant Pages
|
|
