Re: Access AIX system from different network subnet
- From: "Robert T. Repko (R Squared Consultants)" <rtr@xxxxxxxxxxxx>
- Date: Fri, 10 Feb 2006 07:57:47 -0500
That looks like my problem, default gateway. Years ago they used to have this system exposed to the outside world with a gateway of 204.186.115.1. They have since moved the system inside but the gateway was never changed. How do I safely change the default gateway? I'm use to going through SMIT but I know there is a more direct way. Also, it would not surprise me if there is a second IP address on the system (a 204.186.115.x), how would I remove that address and make 172.20.18.2 the one and only IP address.
pburgboe#netstat -r
Routing tables
Destination Gateway Flags Refs Use If PMTU Exp Groups
Route Tree for Protocol Family 2 (Internet):
default 204.186.115.1 UGc 0 0 en0 - -
127/8 loopback U 3 321 lo0 - -
172.20.18/24 pburgboe Uc 0 0 en0 - -
172.20.18.1 pburgboe UHW 1 42 en0 1500 -
172.20.18.83 pburgboe UHW 1 1 en0 - -
172.20.18.103 pburgboe UHW 1 3233 en0 - -
172.20.18.118 pburgboe UHW 5 48235 en0 - -
172.20.18.136 pburgboe UHW 1 30583 en0 - -
172.20.18.242 pburgboe UHW 2 658386 en0 1500 -
204.186.115/24 pburgboe Uc 0 0 en0 - -
204.186.115.1 pburgboe UHW 1 0 en0 - -
Route Tree for Protocol Family 24 (Internet v6):
::1 ::1 UH 0 0 lo0 16896 -
pburgboe#
Believe it or not at 2/9/2006 11:26 PM, Yves Dorfsman said:
On Thu, 9 Feb 2006, Robert T. Repko (R Squared Consultants) wrote:
Telnet. People on the same subnet have been telneting into the system for years. This is the first time someone from a different building (and subnet) is trying to telnet into the AIX system. Everyone is behind the firewall so it shouldn't be a problem. My though is because it is a different subnet, which makes it a different network, that AIX is not accepting the connection.
Looks like your default gateway isn't setup, or not setup properly.
What does "netstat -r" give you ?
Can you ping the default gateway, can you confirm that it is setup as a router.
Also, can you ping the other way around (from the aix box to the clients) ?
What does traceroute tell you ?
Yves.
----
Yves Dorfsman yves@xxxxxxxxx
http://www.cuug.ab.ca/dorfsmay
http://www.SollerS.ca
- References:
- Re: Access AIX system from different network subnet
- From: Rugen, Len
- Re: Access AIX system from different network subnet
- From: Robert T. Repko (R Squared Consultants)
- Re: Access AIX system from different network subnet
- From: Yves Dorfsman
- Re: Access AIX system from different network subnet
- Prev by Date: PGP error 22
- Next by Date: Re: PGP error 22
- Previous by thread: Re: Access AIX system from different network subnet
- Next by thread: Re: Access AIX system from different network subnet
- Index(es):
Relevant Pages
- Re: IPSec, IPTables, multiple subnets
... I am unable to ping any of the PCs behind the ... gateways, however
(though I can do so if I SSH to the gateway itself ... the site with the 10.175.1.0/24 subnet
(which is working 100% as it ... (comp.os.linux.networking) - Re: Virtual IP
... node in a different subnet ping your virtual IP address. ... the correct
network. ... > How to add default gateway for virtual IP address? ... (microsoft.public.windows.server.clustering) - Re: IPSec, IPTables, multiple subnets
... I am unable to ping any of the PCs behind the ... gateways, however
(though I can do so if I SSH to the gateway itself ... the site with the 10.175.1.0/24 subnet
(which is working 100% as it ... (comp.os.linux.networking) - Re: Will Xbox Extender work on UK/PAL Xboxes?
... > It shoudn't but you can remove the gateway on the AP to test it. ... But
if I choose DHCP, how will I know what IP it has been assigned? ... >>> Subnet
255.255.255.0 ... >> I can't ping the AP or the PC. ... (microsoft.public.windows.mediacenter) - Re: AW: Gateway question
... then is will be used if the lower cost route fails. ... AIX Certified Advanced
Technical Expert ... Normally you have 1 default gateway ... When we configure
the gateway on one interface, ... (AIX-L)