Re: NIM and an old H50; can't get it to boot up on the NIM_Master
- From: Sajjad S Hashimi <sajjad@xxxxxxxxxx>
- Date: Thu, 30 Mar 2006 23:50:30 -0700
And, can you ping OK? It might be a firmware issue also. I watch out for
firmware updates often when I'm having NIM problems, most of the time they
have some NIM fixes going on in firmware updates. I'd check this H50's
firmware and possibly update it to the latest.
http://www14.software.ibm.com/webapp/set2/firmware/gjsn?mode=1&mtm=7026-H50
Hope this helps.
Regards,
Sajjad S. Hashimi -
jkstevenson@MICRO
N.COM
Sent by: IBM AIX To
Discussion List aix-l@xxxxxxxxxxxxx
<aix-l@Princeton. cc
EDU>
Subject
Re: NIM and an old H50; can't get
03/30/2006 02:54 it to boot up on the NIM_Master
PM
Please respond to
IBM AIX
Discussion List
Make sure you verify the MAC address is correct ... You may be booting
off the wrong card or the MAC address is incorrect on the NIM side..
Jon
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Page, Jennifer (RBC Dain)
Sent: Thursday, March 30, 2006 9:31 AM
To: aix-l@xxxxxxxxxxxxx
Subject: Re: NIM and an old H50; can't get it to boot up on the
NIM_Master
#4
What are the errors your getting?
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Patrick B. O'Brien
Sent: Thursday, March 30, 2006 10:25 AM
To: aix-l@xxxxxxxxxxxxx
Subject: NIM and an old H50; can't get it to boot up on the NIM_Master
Within SMS, I'm in option 2(multiboot). I've tried a few options to get
this H50 to boot up on my NIM Master to do a O/S fresh install, but no
joy.
Which of the following options should I use and thank you!
1 Select Software
2 Software Default
3 Install From
4 Select Boot Devices
5 OK Prompt
6 Multiboot Startup <OFF>
RBC Dain Rauscher does not accept buy, sell or cancel orders by e-mail,
or any instructions by e-mail that would require your signature.
Information contained in this communication is not considered an
official record of your account and does not supersede normal trade
confirmations or statements. Any information provided has been prepared
from sources believed to be reliable but is not guaranteed, does not
represent all available data necessary for making investment decisions
and is for informational purposes only.
This e-mail may be privileged and/or confidential, and the sender does
not waive any related rights and obligations. Any distribution, use or
copying of this e-mail or the information it contains by other than an
intended recipient is unauthorized. If you receive this e-mail in
error, please advise me (by return e-mail or otherwise) immediately.
Information received by or sent from this system is subject to review by
supervisory personnel, is retained and may be produced to regulatory
authorities or others with a legal right to the information.
E-mail messages are not encrypted. As such, client sensitive
information sent to or received from your RBC Dain Rauscher Financial
Consultant electronically may not be secure.
- References:
- Re: NIM and an old H50; can't get it to boot up on the NIM_Master
- From: jkstevenson
- Re: NIM and an old H50; can't get it to boot up on the NIM_Master
- Prev by Date: Script to compare LPPs on multiple systems ...
- Next by Date: Re: Highest AIX on a Model 150
- Previous by thread: Re: NIM and an old H50; can't get it to boot up on the NIM_Master
- Next by thread: Re: NIM and an old H50; can't get it to boot up on the NIM_Master
- Index(es):
Relevant Pages
|
|


