5702 Dual Channel Adapter Card

I have a 550Q with a 5702 Dual Channel Adapter Card.
Port 1 is running the 6 pack bay of disks in the D20 I/O Drawer.
I am trying to connect Port 0 to a 3580 LTO Tape Drive.
 
Internally there are two SCSI connections from the 5702 card - one to each of 2 6-pack bays of drives.   I disconnected the one SCSI connection to the second bay of drives (it is empty).  Then connected the LTO tape drive to port 0 on the 5702.  When I boot up I get SCSI Bus errors.
 
I also tried to leave the internal SCSI connections the way they are (one to each 6-pack drive bays) and I don't get the SCSI connection errors.. but I also do not see my tape drive.
 
I have the correct scsi tape drivers installed.
 
I am sure I am not connecting this properly... any ideas?
 
(Note: I have a terminator on the LTO tape drive)


***************************defiant************************************
This email and any files transmitted with it are intended solely for
the use of the individual or agency to whom they are addressed. If
you have received this email in error please notify the Navy Exchange
Service Command e-mail administrator.

This footnote also confirms that this email message has been scanned
for the presence of computer viruses.

messaging_support_team@xxxxxxxxxxxxxxx
**********************************************************************