Re: IBM 3153 terminal - using 2 ports

You need to "hot key" from one session to the other. I'm pretty sure
it's the Ctl-Key and the Enter-Key(on the keypad), to hot key.



You may need to press the Ctl and (-)(minus) Keys to get into the
Console Config routine.











________________________________

From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Rugen, Len
Sent: Friday, July 07, 2006 7:12 AM
To: aix-l@xxxxxxxxxxxxx
Subject: IBM 3153 terminal - using 2 ports



I have 2 H50's each with an IBM 3153 terminal connected to a serial
port. The 3153's seem to be setup to use 2 serial ports and switch
between hosts, but I can't get it to work. Is there a trick or are they
really not designed to port switch?



Thanks

Relevant Pages

  • Re: IBM 8275-322 arrives!!!
    ... IBM 8270 Nways LAN Switch Model 800: ... Port capacity up to 16 OC-3 ports ...
    (comp.sys.ibm.ps2.hardware)
  • Re: IBM 3153 terminal - using 2 ports
    ... I have 2 H50's each with an IBM 3153 terminal connected to a serial ... The 3153's seem to be setup to use 2 serial ports and switch ...
    (AIX-L)
  • Re: The Woodworking Channel?
    ... ports, etc. Getting some of this stuff to work is all a black art... ... Would that be the old Big Blue (IBM) or the new Big Blue? ... A little snooping reveals that the servers are located at ... 1470 River Edge Parkway ...
    (rec.crafts.woodturning)
  • Re: IBM 3153 terminal - using 2 ports
    ... You used null modem on serial 1 and modem on serial 2 correct? ... IBM 3153 terminal - using 2 ports ... But just not two computers via both serial ports. ... are they really not designed to port switch? ...
    (AIX-L)
  • Re: fpu IO port reservation (arch/i386)
    ... There are two ports used: 0xf0 is the busy latch reset and 0xf1 is the ... way the FPU has been wired by IBM in their PC design. ... I didn't think there was a IBM 386 PC. ...
    (Linux-Kernel)