Re: 2104-DU3 options
- From: "Green, Simon" <simon.green@xxxxxxx>
- Date: Thu, 11 Jan 2007 16:59:11 -0000
Simply re-seating the drives and all the cables would be a good start.
I've known of problems which were fixed by replacing cables, simply
because that involved re-seating them and not because there was an
actual flaw with the cable.
--
Simon Green
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
John T. Mills
Sent: 11 January 2007 16:32
To: aix-l@xxxxxxxxxxxxx
Subject: Re: 2104-DU3 options
I've had the same issue in the past and it ended up disappearing with a
cable replacement. Things like >90 degree cable turns in a short
distance
can cause issues. I would try to get the cable replaced and for good
measure reseat the drives.
John T Mills
- References:
- Re: 2104-DU3 options
- From: John T. Mills
- Re: 2104-DU3 options
- Prev by Date: Re: HACMP: umount fails and fuser finds nothing
- Next by Date: posting issues
- Previous by thread: Re: 2104-DU3 options
- Next by thread: Re: HACMP: umount fails and fuser finds nothing
- Index(es):
Relevant Pages
|
|
