Re: SNA problems

Hi



Thanks to you both. I'm due down on site on Thursday and Friday. I will
rebuild the box and have another go at getting it working properly using
your suggestions



Thanks again

Regards,

Suzanne Davies

Unix BAU Support
Infrastructure Services, Service Delivery
External : 020 7 922 3117
Network : 7430 3117
E-Mail : suzanne.davies@xxxxxxxxxxxxxxx
<blocked::mailto:suzanne.davies@xxxxxxxxxxxxxxx>

_____

From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Miller, Dave (I.S.)
Sent: 10 December 2007 16:25
To: aix-l@xxxxxxxxxxxxx
Subject: Re: SNA problems



The SNA kernel "piece(s)" is not loaded.

You need to make sure sna:2:wait:/etc/rc.sna is being loaded from inittab.
If not you can run it after reboot.



-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Davies, Suzanne
Sent: Monday, December 10, 2007 9:13 AM
To: aix-l@xxxxxxxxxxxxx
Subject: SNA problems



I have a problem trying to configure SNA on a machine. The background to
the problem is that we have 2 machines that process part of our printing.
They are both F50's that share SSA disk. They don't have HACMP but are
designed so that one can be used as a DR box for the other by way of manual
failover. There were network issues on the site and communication was lost
with one of the nodes so the people on site failed over to the other one.
By the time the problem was reported, it was reported as a hardware issue.
The card was replaced and in the ensuing up-ing and down-ing of the server
other hardware issues occurred and we lost hdisk0. This was replaced but we
had lost the OS. There were no mksysb tapes. The box had to be cloned from
the other one. Unfortunately this has meant that the original SNA
configuration for this node has been lost. After cloning the OS SNA no
longer starts. I get this message:



SNA software is initializing...



SNA software failed to initialize, reason:



Failed to start Trace Daemon

- Trace Daemon failed to access the trace driver - /dev/sna_trace



Operating System error:



- No such file or directory



Error : Failed to access the node. Check that CS/AIX software is running

query_node_limits command failed :

primary_rc = COMM_SUBSYSTEM_NOT_LOADED, secondary_rc = 00000002 (UNKNOWN)

Error : Failed to access the node. Check that CS/AIX software is running

init_node command failed :

primary_rc = COMM_SUBSYSTEM_NOT_LOADED, secondary_rc = 00000002 (UNKNOWN)





I have tried googling the error but it hasn't helped much. I know nothing
about SNA, can anyone point me in the right direction for reading material
or ideas about what to look for first. I'm due to go back again later in
the week and I could really do with some pointers.



Many thanks



Regards,

Suzanne Davies

Unix BAU Support
Infrastructure Services, Service Delivery
External : 020 7 922 3117
Network : 7430 3117
E-Mail : suzanne.davies@xxxxxxxxxxxxxxx
<blocked::mailto:suzanne.davies@xxxxxxxxxxxxxxx>





This e-mail is only for the above addressees. It may contain confidential or
privileged information. If you are not an addressee you must not copy,
distribute, disclose or use any of the information in it or any attachments.
If you have received it in error please notify the sender and delete it
immediately.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN.
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone:
0131 225 4555.
Cheltenham & Gloucester plc. Registered Office: Barnett Way, Gloucester GL4
3RL. Registered in England and Wales, number 2299428. Telephone: 01452
372372.
Cheltenham & Gloucester Savings is a division of Lloyds TSB Bank plc.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham & Gloucester plc
are authorised and regulated by the Financial Services Authority.

Lloyds TSB Group plc. Registered Office: Henry Duncan House, 120 George
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95000. Telephone:
0131 225 4555.
Lloyds TSB Group plc is a signatory to the Banking Codes.

Telephone calls may be monitored or recorded.

Relevant Pages

  • Re: SNA problems
    ... The SNA kernel "piece" is not loaded. ... Registered Office: ... Lloyds TSB Scotland plc. ...
    (AIX-L)
  • Re: AIX LED Codes
    ... Registered Office: 25 Gresham Street, ... Lloyds TSB Scotland plc. ... Lloyds TSB Group plc is a signatory to the Banking Codes. ...
    (AIX-L)
  • Re: AIX LED Codes
    ... Lloyds TSB Scotland plc. ... Registered Office: Henry Duncan House, 120 George Street, Edinburgh EH2 4LH. ... Gloucester plc are authorised and regulated by the Financial Services Authority. ...
    (AIX-L)
  • Re: Changing user password upsets informix
    ... Changing user password upsets informix ... Registered Office: 25 Gresham Street, ... > Lloyds TSB Scotland plc. ...
    (AIX-L)
  • Re: Changing user password upsets informix
    ... What you want to do is trace the listener process to see what's causing the ... Registered Office: 25 Gresham Street, ... Lloyds TSB Scotland plc. ...
    (AIX-L)