Re: IBM Power and SUSE Linux
- From: "Mills, John T" <John.Mills@xxxxxxxxxxx>
- Date: Thu, 7 May 2009 07:39:34 -0500
/etc/sysconfig/network/ifcfg-####
replace #### with the device from ifconfig -a that you want to
configure.
Some options:
DEVICE=eth0
BOOTPROTO=static
DHCPCLASS=
HWADDR=00:AA:11:22:33:44
IPADDR=1.2.3.5
NETMASK=255.255.255.0
ONBOOT=yes
ETHTOOL_OPTS="autoneg on"
DNS1=1.2.3.4
eth0:1, etc. for IPV4 aliases
John T. Mills
________________________________
From: IBM AIX Discussion List [mailto:aix-l@xxxxxxxxxxxxx] On Behalf Of
Miller, Dave (I.S.)
Sent: Wednesday, May 06, 2009 9:08 AM
To: aix-l@xxxxxxxxxxxxx
Subject: IBM Power and SUSE Linux
I know this is a bit off topic as it is pSeries related, not necessarily
AIX.
Can someone point me in the right direction to configure a network
adapter on SUSE Linux on a Power6 p510?
Its set up as a full system LPAR, no VIO server, and we are having a
heck of a time getting the adapter configured and on the net.
Thanks.
________________________________
CONFIDENTIALITY NOTICE: This email communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients named above. If you are not the intended
recipient, you are hereby notified that you have received this
communication in error and that any review, disclosure, dissemination,
distribution or copying of it or its contents is prohibited. If you have
received this communication in error, please reply to the sender
immediately or by telephone at (413) 794-0000 and destroy all copies of
this communication and any attachments. For further information
regarding Baystate Health's privacy policy, please visit our Internet
web site at http://www.baystatehealth.com.
- References:
- IBM Power and SUSE Linux
- From: Miller, Dave (I.S.)
- IBM Power and SUSE Linux
- Prev by Date: Re: cplv question
- Next by Date: Re: NTP over TTY
- Previous by thread: IBM Power and SUSE Linux
- Next by thread: NTP over TTY
- Index(es):
Relevant Pages
|
