Re: AoE for 4.x

From: Eivind Eklund (eivind_at_FreeBSD.org)
Date: 09/23/04

  • Next message: Brooks Davis: "Re: AoE for 4.x"
    Date: Thu, 23 Sep 2004 19:14:24 +0000
    To: Sam <sah@softcardsystems.com>
    
    

    On Thu, Sep 23, 2004 at 10:51:59AM -0500, Sam wrote:
    > I'm hoping to have a 5.x driver ready in the next month or two,
    > probably patched against 5.3-stable when it's ready.

    Drivers go into the system in the order
    -current
    -stable

    This is basically the order we ALWAYS force, to avoid people doing
    development on older branches and a continual loss of functionality.

    This means that you (or somebody else) will need to port it to -current
    before it can go into 5.3-stable.

    Eivind.
    _______________________________________________
    freebsd-arch@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-arch
    To unsubscribe, send any mail to "freebsd-arch-unsubscribe@freebsd.org"


  • Next message: Brooks Davis: "Re: AoE for 4.x"

    Relevant Pages

    • Re: Seagate Barracuda 160 GB IDE becomes corrupted. RMA?
      ... Operating System Microsoft Windows 2000 Professional ... System Memory 512 MB ... Communication Port Communications Port ... Driver Download http://www.viaarena.com/?PageID=2 ...
      (comp.sys.ibm.pc.hardware.storage)
    • soft lockup disease (2.6.14-rc1, x86_64)
      ... IA-32 Microcode Update Driver: v1 ... IO window: 1000-1fff] L ... ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ...
      (Linux-Kernel)
    • [PATCH]PCI Express Port Bus Driver
      ... A PCI Express Port is a logical PCI-PCI Bridge structure. ... physical device to be handled by only a single driver. ... service drivers will compete for a single PCI-PCI Bridge device. ...
      (Linux-Kernel)
    • Need pci=assign-busses for Acer Aspire 9410
      ... Using APIC driver default ... ACPI: Local APIC address 0xfee00000 ... SELinux: Initializing. ... cs: IO port probe 0x6000-0x6fff: clean. ...
      (Linux-Kernel)
    • 2.6.19-rc2 - Cable detection problem in pata_amd
      ... the pata_amd driver mis-detects the cable connected to the ... 2nd port on my system as 40 wire and sets UDMA/33 for this drive. ... I've tried switching the cables around to see if it truly was a cable ... Linux Plug and Play Support v0.97 Adam Belay ...
      (Linux-Kernel)