Re: Portable USB hard drive regression

From: Mike Makonnen (mtm_at_identd.net)
Date: 07/24/03

  • Next message: David O'Brien: "Re: Floppyless release build of sparc64" 
    Date: Thu, 24 Jul 2003 14:38:24 -0400
To: freebsd-current@freebsd.org

    On Wed, Jul 23, 2003 at 11:00:18AM -0700, John-Mark Gurney wrote:
    > Please provide more information, such as dmesg including the controller
    > you are using. Also, you don't state if this is USB2.0 device or a
    > USB1.1 device. This makes it hard to debug and understand.
    >
    > Also, I would recomment you recompile your kernel w/ USB_DEBUG, and
    > be prepared to turn on various sysctl's to provide more information.

    OK, here's the data you asked for:

    The hard drive says it supports USB 2.0, but my machine only
    has USB 1.0 controllers.

    The complete dmesg is at: http://people.freebsd.org/~mtm/dmesg.boot ,
    but the USB part is:

    uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 12 at device 7.2 on pc
    i0
    usb0: <VIA 83C572 USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass
     3/1
    ums0: 3 buttons and Z dir.
    uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 12 at device 7.3 on pc
    i0
    usb1: <VIA 83C572 USB controller> on uhci1
    usb1: USB revision 1.0
    uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    ugen0: Genesys Logic USB Host To Host Bridge, rev 1.00/1.80, addr 2

    The output when I try to connect the device (with options USB_DEBUG):
    Jul/24 mtm@kokeb ~% sysctl -a | grep usb
    hw.usb.ehci.debug: 0
    hw.usb.ohci.debug: 1
    hw.usb.ugen.debug: 1
    hw.usb.uhci.debug: 1
    hw.usb.uhci.loop: 0
    hw.usb.uhid.debug: 0
    hw.usb.uhub.debug: 1
    hw.usb.ukbd.debug: 0
    hw.usb.ulpt.debug: 0
    hw.usb.umass.debug: 1
    hw.usb.ums.debug: 0
    hw.usb.urio.debug: 1
    hw.usb.uscanner.debug: 0
    hw.usb.debug: 1

    uhub_explore: status change hub=1 port=1
    usbd_new_device bus=0xc2610000 port=1 depth=1 speed=2
    usbd_new_device: adding unit addr=3, rev=200, class=0, subclass=0, protocol=0, maxpacket=64, len=18, speed=2
    usbd_new_device: new dev (addr 3), dev=0xc2670200, parent=0xc2640b00
    usbd_probe_and_attach: trying device specific drivers
    usbd_probe_and_attach: no device specific driver found
    usbd_probe_and_attach: looping over 1 configurations
    usbd_set_config_index: status=0x0001, error=NORMAL_COMPLETION
    usbd_set_config_index: (addr 2) cno=3 attr=0xc0, selfpowered=1, power=98
    usbd_set_config_index: set config 2
    umass0: NewAge International STORIX Fusion25, rev 2.00/11.00, addr 3
    umass0: SCSI over Bulk-Only; quirks = 0x0000
    umass0:4:0:-1: Attached to scbus4
    uhci_timeout: uxfer=0xc29a5100
    uhci_timeout_task: xfer=0xc29a5100
    uhci_check_intr: aborted xfer=0xc29a5100
    uhci_timeout: uxfer=0xc2526500
    uhci_timeout_task: xfer=0xc2526500
    uhci_check_intr: aborted xfer=0xc2526500
    umass0: BBB reset failed, TIMEOUT
    uhci_timeout: uxfer=0xc29a5100
    uhci_timeout_task: xfer=0xc29a5100
    uhci_check_intr: aborted xfer=0xc29a5100
    uhci_timeout: uxfer=0xc2526500
    uhci_timeout_task: xfer=0xc2526500
    uhci_check_intr: aborted xfer=0xc2526500
    umass0: BBB reset failed, TIMEOUT
    uhci_timeout: uxfer=0xc29a5100
    uhci_timeout_task: xfer=0xc29a5100
    uhci_check_intr: aborted xfer=0xc29a5100
    uhci_timeout: uxfer=0xc2526500
    uhci_timeout_task: xfer=0xc2526500
    uhci_check_intr: aborted xfer=0xc2526500
    umass0: BBB reset failed, TIMEOUT
    uhci_timeout: uxfer=0xc29a5100
    uhci_timeout_task: xfer=0xc29a5100
    uhci_check_intr: aborted xfer=0xc29a5100
    uhci_timeout: uxfer=0xc2526500
    uhci_timeout_task: xfer=0xc2526500
    uhci_check_intr: aborted xfer=0xc2526500
    umass0: BBB reset failed, TIMEOUT
    uhci_timeout: uxfer=0xc29a5100
    uhci_timeout_task: xfer=0xc29a5100
    uhci_check_intr: aborted xfer=0xc29a5100
    uhci_timeout: uxfer=0xc2526500
    uhci_timeout_task: xfer=0xc2526500
    uhci_check_intr: aborted xfer=0xc2526500
    umass0: BBB reset failed, TIMEOUT

    Please let me know how else I can be of assistance.

    Cheers. 

    -- 
Mike Makonnen  | GPG-KEY: http://www.identd.net/~mtm/mtm.asc
mtm@identd.net | D228 1A6F C64E 120A A1C9  A3AA DAE1 E2AF DBCC 68B9
mtm@FreeBSD.Org| FreeBSD - Unleash the Daemon!
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
  • Next message: David O'Brien: "Re: Floppyless release build of sparc64"