Re: TESTERS WANTED for ATAng preview 1

From: Jason Dambrosio (jason_at_wiz.cx)
Date: 08/09/03

  • Next message: Poul-Henning Kamp: "Re: GEOM/vinum compatibility (was: vinum lock panic at startup -current)" 
    Date: Fri, 8 Aug 2003 17:05:50 -0700
To: Soeren Schmidt <sos@spider.deepcore.dk>

    On Fri, Aug 08, 2003 at 09:55:11PM +0200, Soeren Schmidt wrote:
    >
    > The first preview release of ATAng is now available on:
    >
    > ftp://ftp.deepcore.dk/pub/ATAng

        I cvsup'd to HEAD and applied the conf-patch and put in your
    new ATA source, but when I recompiled my kernel and rebooted, the
    server just locked up with the following dmesg:

    Console: serial port
    BIOS drive C: is disk0
    BIOS 639kB/523264kB available memory

    FreeBSD/i386 bootstrap loader, Revision 1.1
    (wiz@test-server.lax1.tekgenesis.net, Mon Jun 9 08:51:01 HST 2003)
    Loading /boot/defaults/loader.conf
    /boot/kernel/kernel text=0x23b4b4 data=0x2700c+0x4cfd0 syms=[0x4+0x2f0a0+0x4+0x3a9c7]

    Hit [Enter] to boot immediately, or any other key for command prompt.
    Booting [/boot/kernel/kernel]...
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.1-CURRENT #1: Fri Aug 8 13:41:50 HST 2003
        wiz@test-server.lax1.tekgenesis.net:/usr/obj/usr/src/sys/LEET
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc041b000.
    Timecounter "i8254" frequency 1193182 Hz
    CPU: AMD Athlon(tm) XP 2100+ (1733.41-MHz 686-class CPU)
      Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
      Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
      AMD Features=0xc0400000<AMIE,DSP,3DNow!>
    real memory = 536870912 (512 MB)
    avail memory = 517066752 (493 MB)
    Pentium Pro MTRR support enabled
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcibios: BIOS version 2.10
    Using $PIR table, 14 entries at 0xc00f8030
    pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
    pci0: <PCI bus> on pcib0
    pci_cfgintr: 0:13 INTA BIOS irq 11
    pci_cfgintr: 0:15 INTA BIOS irq 10
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    atapci0: <Promise PDC20376 SATA150 controller> port 0xe400-0xe47f,0xe800-0xe80f,0xec00-0xec3f mem 0xdffa0000-0xdffbffff,0xdffdf000-0xdffdffff irq 11 at device 13.0 on pci0
    ata2: at 0xdffdf000 on atapci0
    ata3: at 0xdffdf000 on atapci0
    ata4: at 0xdffdf000 on atapci0
    bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xdffc0000-0xdffcffff irq 10 at device 15.0 on pci0
    bge0: Ethernet address: 00:10:dc:d6:05:a2
    miibus0: <MII bus> on bge0
    brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
    brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
    isab0: <PCI-ISA bridge> at device 17.0 on pci0
    isa0: <ISA bus> on isab0
    orm0: <Option ROM> at iomem 0xc8000-0xcffff on isa0
    ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
    ata1 at port 0x376,0x170-0x177 irq 15 on isa0
    atkbdc0: <Keyboard cller (i8042)> at port 0x64,0x60 on isa0
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    unknown: <PNP0c02> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    RTC BIOS diagnostic error 20<config_unit>
    Timecounter "TSC" frequency 1733405338 Hz
    Timecounters tick every 10.000 msec
    IPv6 packet filtering initialized, default to accept, unlimited logging
    DUMMYNET initialized (011031)
    ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited
    IPsec: Initialized Security Association Processing.
    ad6: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata3-master UDMA100

    (locked up at that point)

    Thanks,

    Jason
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Poul-Henning Kamp: "Re: GEOM/vinum compatibility (was: vinum lock panic at startup -current)"

    Relevant Pages

    • "ffs_mountroot: cant find rootvp" after cvsup and making worldfmen
      ... installed the world and a new kernel. ... When I boot the new kernel, ... <ACPI PCI bus> on pcib0 ... <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq ...
      (freebsd-stable)
    • 6.0-RELEASE panic: page fault
      ... dies shortly on make kernel / other cpu+disk intense ... acpi0: on motherboard ... <ACPI PCI bus> on pcib0 ... ppc0: parallel port not found. ...
      (freebsd-stable)
    • Re: 6.0-CURRENT SNAP004 hangs on amr
      ... >also has the kernel selectors. ... the BIOS is probably expecting ... npx0: on motherboard ... pci0: <PCI bus> on pcib0 ...
      (freebsd-current)
    • Re: [Linux-fbdev-devel] Generic VESA framebuffer driver and Video card BOOT?
      ... >> kernel image or that the image is corrupt or that hardware diagnostics failed. ... Well being able to use this BIOS emulator logic to bring up the primary ... the same as Open Firmware really). ... Actually there is nothing wrong with the x86 BIOS from the perspective of ...
      (Linux-Kernel)
    • Windows CE 6.0 Hangs / Reboots
      ... CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00fae20 ... GetRoutingOption, found ROM version for Routing table. ... Looking for rom chain ... Old or invalid version stamp in kernel structures - starting clean! ...
      (microsoft.public.windowsce.platbuilder)
    • Quantcast