RE: an driver / Cisco Aironet 340 stopped working
Jack.W.Parks_at_alltel.com
Date: 08/18/03
- Previous message: Daniel Nielsen: "USB Printer?"
- Maybe in reply to: Tomi Vainio - Sun Finland: "an driver / Cisco Aironet 340 stopped working"
- Next in thread: Doug Ambrisko: "Re: an driver / Cisco Aironet 340 stopped working"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 18 Aug 2003 07:24:24 -0500 To: <Tomi.Vainio@Sun.COM>, <freebsd-current@freebsd.org>, <freebsd-mobile@freebsd.org>
Don't know if anyone replied yet since I don't subscribe to
freebsd-current, but I had to add the following line to my
/boot/loader.conf file.
hw.pci.allow_unsupported_io_range="1"
Jack
-----Original Message-----
From: Tomi Vainio - Sun Finland [mailto:Tomi.Vainio@Sun.COM]
Sent: Saturday, August 16, 2003 4:27 PM
To: freebsd-current@freebsd.org; freebsd-mobile@freebsd.org
Subject: an driver / Cisco Aironet 340 stopped working
I've used my Cisco WLAN with Toshiba Portege 3440 couple years but now
it's broken. I just upgraded to new Toshiba Tecra M1 and reinstalled
FreeBSD there and now I get "an0: record length mismatch -- expected
430, got 440 for Rid ff68" errors. I already tried with old laptop with
latest kernel and old kernel from Jun 26th but it's also broken there so
I cannot say who long this has been broken.
Tomppa
fwe0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::39ff:fe34:7ff2%fwe0 prefixlen 64 scopeid 0x1
ether 02:00:39:34:7f:f2
ch 1 dma 0
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet6 fe80::208:dff:feda:ec61%em0 prefixlen 64 scopeid 0x2
inet 212.226.167.247 netmask 0xfffffff0 broadcast
212.226.167.255
inet6 2001:670:82:babe:208:dff:feda:ec61 prefixlen 64 tentative
autoconf
ether 00:08:0d:da:ec:61
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
an0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::240:96ff:fe38:56e7%an0 prefixlen 64 scopeid 0x4
ether 00:40:96:38:56:e7
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid AsOlA 1:AsOlA
stationname phb
channel 6 authmode OPEN powersavemode CAM powersavesleep 200
wepmode ON weptxkey 1
wepkey 1:128-bit
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved. FreeBSD 5.1-CURRENT #3: Sat Aug 16 20:28:39 EEST 2003
tomppa@phb.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/PHB
acpi_alloc_wakeup_handler: unable to allocate wake memory Preloaded elf
kernel "/boot/kernel/kernel" at 0xc0650000. Preloaded elf module
"/boot/kernel/splash_bmp.ko" at 0xc06502e4. Preloaded elf module
"/boot/kernel/vesa.ko" at 0xc0650394. Preloaded splash_image_data
"/boot/splash.bmp" at 0xc0650440. Preloaded elf module
"/boot/kernel/usb.ko" at 0xc0650490. Preloaded elf module
"/boot/kernel/ukbd.ko" at 0xc0650538. Preloaded elf module
"/boot/kernel/ums.ko" at 0xc06505e4. Preloaded elf module
"/boot/kernel/umass.ko" at 0xc065068c. Preloaded elf module
"/boot/kernel/random.ko" at 0xc0650738. Calibrating clock(s) ... i8254
clock: 1193183 Hz Timecounter "i8254" frequency 1193183 Hz quality 0
Calibrating TSC clock ... TSC clock: 1396507980 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1396.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 536674304 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000677000 - 0x000000001f692fff, 520208384 bytes (127004 pages)
avail memory = 513142784 (489 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0240
bios32: Entry = 0xfc0e3 (c00fc0e3) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd641
pnpbios: Found PnP BIOS data at 0xc00f0450
pnpbios: Entry = f0000:9138 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 8938f351
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00
00 01 00 02 00 02 13 01 00 01 2d 01 00 01 38 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 31 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc053aca0 (1000040)
VESA: Trident CYBER 2100
VESA: TRIDENT MICROSYSTEMS INC. CYBER 2100 RXT 7.3 (16.28)
random: <entropy source>
splash: image@0xc053be60, size:787506
splash_bmp: beyond screen capacity (1024x768, 255 colors)
splash_bmp: beyond screen capacity (1024x768, 255 colors)
bmp_start(): splash_mode:261
splash: image decoder found: splash_bmp
acpi0: <TOSHIB 750 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f01a0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 11
embedded 0 31 B 0x61 11
embedded 0 29 A 0x60 11
embedded 0 29 B 0x63 11
embedded 0 29 C 0x62 11
embedded 0 29 D 0x6b 11
embedded 2 11 A 0x60 11
embedded 2 11 B 0x63 11
embedded 1 0 A 0x6a 11
embedded 2 10 A 0x63 11
embedded 2 10 B 0x60 11
embedded 2 13 A 0x60 11
embedded 2 7 A 0x69 11
embedded 2 9 A 0x68 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 3, max = 189, width = 186 ACPI timer looks
GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3,
width = 0 ACPI timer looks BAD min = 3, max = 382, width = 379 ACPI
timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min =
3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD
min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3,
width = 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base c0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3340, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3341, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
map[20]: type 4, range 32, base 0000efe0, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x24c2, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c4, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000ef60, size 5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found-> vendor=0x8086, dev=0x24c7, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type 1, range 32, base dfeffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found-> vendor=0x8086, dev=0x24cd, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x83
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000bff8, size 3, enabled
map[14]: type 4, range 32, base 0000bff4, size 2, enabled
map[18]: type 4, range 32, base 0000bfe8, size 3, enabled
map[1c]: type 4, range 32, base 0000bfe4, size 2, enabled
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC)
pcib0: slot 31 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x24ca, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000be00, size 8, enabled
map[14]: type 4, range 32, base 0000bdc0, size 6, enabled
map[18]: type 1, range 32, base dfcffe00, size 9, enabled
map[1c]: type 1, range 32, base dfcffd00, size 8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c5, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ba00, size 8, enabled
map[14]: type 4, range 32, base 0000b980, size 7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c6, revid=0x03
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82855 host to AGP bridge> mem 0xc0000000-0xcfffffff at
device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdff00000-0xf7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base efc00000, size 22, enabled
map[18]: type 1, range 32, base e0000000, size 27, enabled
map[1c]: type 1, range 32, base dfff8000, size 15, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKG)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1023, dev=0x2100, revid=0x91
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xefe0-0xefff
irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef80-0xef9f
irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef60-0xef7f
irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfeffc00-0xdfefffff irq
11 at device 29.7 on pci0
ehci0: (New EHCI DeviceId=0x24cd8086)
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 5
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xdfd00000-0xdfdfffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0
\\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0
\\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base dfdff800, size 11, enabled
map[14]: type 1, range 32, base dfdf8000, size 14, enabled
pcib2: matched entry for 2.7.INTA (source \\_SB_.LNKF)
pcib2: slot 7 INTA is routed to irq 11
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000
ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfdc0000, size 17, enabled
map[18]: type 4, range 32, base 0000cf40, size 6, enabled
pcib2: matched entry for 2.9.INTA (source \\_SB_.LNKE)
pcib2: slot 9 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1016, revid=0x03
bus=2, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dfdbf000, size 12, enabled
pcib2: matched entry for 2.10.INTA (source \\_SB_.LNKD)
pcib2: slot 10 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1043, revid=0x04
bus=2, slot=10, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x32
bus=2, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x32
bus=2, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base dfdbee00, size 9, enabled
pcib2: matched entry for 2.13.INTA (source \\_SB_.LNKA)
pcib2: slot 13 INTA is routed to irq 11
found-> vendor=0x1179, dev=0x0805, revid=0x03
bus=2, slot=13, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xdfdf8000-0xdfdfbfff,0xdfdff800-0xdfdfffff irq 11 at device 7.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range
0xdfdff800-0xdfdfffff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:39:00:00:34:7f:f2
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:34:7f:f2
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port
0xcf40-0xcf7f mem 0xdfdc0000-0xdfddffff irq 11 at device 9.0 on pci2
pcib2: device em0 requested decoded memory range 0xdfdc0000-0xdfddffff
pcib2: device em0 requested decoded I/O range 0xcf40-0xcf7f
em0: bpf attached
em0: Speed:N/A Duplex:N/A
pci2: <network> at device 10.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xdfd00000-0xdfdfffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.11.INTA (source \\_SB_.LNKA)
pcib2: slot 11 INTA is routed to irq 11
cbb0: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070032 0x00824000
0x10: 0xdfd00000 0x04800080 0x00040402 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xdfd00000-0xdfdfffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.11.INTB (source \\_SB_.LNKD)
pcib2: slot 11 INTB is routed to irq 11
cbb1: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070032 0x00824000
0x10: 0xdfd01000 0x04800080 0x00050502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0xbfe4-0xbfe7,0xbfe8-0xbfef,0xbff4-0xbff7,0xbff8-0xbfff
irq 11 at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbdc0-0xbdff,0xbe00-0xbeff mem
0xdfcffd00-0xdfcffdff,0xdfcffe00-0xdfcfffff irq 11 at device 31.5 on
pci0
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D
Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved
4
pcm0: sndbuf_setmap a56000, 4000; 0xe5e4b000 -> a56000
pcm0: sndbuf_setmap a79000, 4000; 0xe5e4f000 -> a79000
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:261
fb0: window:0xe5e8a000 size:32768k gran:32768k, buf:0xe5e8a000
size:32768k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67
5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1396507980 Hz quality 800 Timecounters tick
every 10.000 msec
lo0: bpf attached
em0: Link is up 100 Mbps Full Duplex
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad0: success setting UDMA100 on Intel ICH4 chip
ad0: <TOSHIBA MK4019GAX/FA003E> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
bus_explore done
sbp_post_explore (sbp_cold=2)
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on Intel ICH4 chip
acd0: <DW-224E/7.0B> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 4134KB/s (4134KB/s), 1658KB
buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm photo disc
pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz [0] f:00
typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:53416062 [1] f:00 typ:6
s(CHS):1023/255/63 e(CHS):1023/254/63 s:53416125 l:16370235 [2] f:80
typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69786360 l:7197120 [3]
f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:76983480 l:1156680
GEOM: Configure ad0s1, start 32256 length 27349023744 end 27349055999
GEOM: Configure ad0s2, start 27349056000 length 8381560320 end
35730616319
GEOM: Configure ad0s3, start 35730616320 length 3684925440 end
39415541759
GEOM: Configure ad0s4, start 39415541760 length 592220160 end
40007761919
GEOM: Configure ad0s3a, start 536870912 length 3148054528 end 3684925439
GEOM: Configure ad0s3b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s3c, start 0 length 3684925440 end 3684925439
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
start IR DMA 0x0
fwohci0: maxdesc: 3
em0: Link is up 100 Mbps Full Duplex
fwohci0: maxdesc: 5
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 30 func 0
em0: Link is up 100 Mbps Full Duplex
acpi_cmbat0: battery initialization failed, giving up
acpi_cmbat1: battery initialization failed, giving up
pcib2: device pccard1 requested decoded memory range
0xdfd00000-0xdfdfffff
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: Cisco Systems, 340 Series Wireless LAN Adapter
pccard1: Manufacturer code 0x15f, product 0x7
pccard1: function 0: network adapter, ccr addr 3e0 mask 7
pccard1: function 0, config table entry 5: I/O card; irq mask ffff;
iomask 6, iospace 0-3f; io16 irqlevel
pcib2: device pccard1 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard1 requested decoded memory range
0xdfd00000-0xdfdfffff
an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f
irq 11 function 0 config 5 on pccard1
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: record length mismatch -- expected 104, got 852 for Rid ff11
pcib2: device pccard1 requested decoded I/O range 0x100-0x13f
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 132, got 176 for Rid ff00
an0: record length mismatch -- expected 104, got 852 for Rid ff11
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:40:96:38:56:e7
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 156, got 182 for Rid ff20
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: RID access failed
an0: RID access failed
pcib2: device pccard1 requested decoded I/O range 0x100-0x13f
an0: detached
_______________________________________________
freebsd-mobile@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe@freebsd.org"
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
- Previous message: Daniel Nielsen: "USB Printer?"
- Maybe in reply to: Tomi Vainio - Sun Finland: "an driver / Cisco Aironet 340 stopped working"
- Next in thread: Doug Ambrisko: "Re: an driver / Cisco Aironet 340 stopped working"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
