Re: sony vaio pcg-gr390

From: Putinas (pilkis_at_gmx.net)
Date: 08/29/03

  • Next message: Matthias Andree: "Re: 2 ports broken after gcc import" 
    To: "Andre Guibert de Bruet" <andy@siliconlandmark.com>
Date: Fri, 29 Aug 2003 23:52:09 +0200

    I rebooted my notebook to freebsd and was thinking how to save log file if
    kernel doesn't boot ... and strange thing happened kernel booted up no hang.
    ( after I rebooted 3 times more - hanging in same place like before ). So I
    think I just got lucky to save dmesg without headache ... and here it is (
    sorry if posting verbose dmesg on the list is bad idea :/ ) . The last lines
    what I saw when kernel lockups is:
    acpi_acad0: acline initialization start
    acpi_acad0: On Line
    acpi_acad0: acline initialization done, tried 1 times
    cbb0: Unsupported card type detected
    <here finish>

    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD 5.1-CURRENT #0: Fri Aug 29 06:29:49 EET 2003
        root@pilkisnote.spo-tripoli.local:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc0752000.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0752294.
    Calibrating clock(s) ... i8254 clock: 1193189 Hz
    CLK_USE_I8254_CALIBRATION not specified - using default frequency
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Calibrating TSC clock ... TSC clock: 1193108906 Hz
    CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1193.11-MHz 686-class
    CPU)
      Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1

    Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
    PAT,PSE36,MMX,FXSR,SSE>
    real memory = 536346624 (511 MB)
    Physical memory chunk(s):
    0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
    0x0000000000779000 - 0x000000001f5d3fff, 518369280 bytes (126555 pages)
    0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages)
    avail memory = 512958464 (489 MB)
    bios32: Found BIOS32 Service Directory header at 0xc00f6d00
    bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1
    pcibios: PCI BIOS entry at 0xfd870+0x13a
    pnpbios: Found PnP BIOS data at 0xc00f6d30
    pnpbios: Entry = f0000:a456 Rev = 1.0
    Other BIOS signatures found:
    wlan: <802.11 Link Layer>
    null: <null device, zero device>
    random: <entropy source>
    mem: <memory & I/O>
    Pentium Pro MTRR support enabled
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <SONY C0 > on motherboard
    pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
    pci_open(1a): mode1res=0x80000000 (0x80000000)
    pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
    pcibios: BIOS version 2.10
    Using $PIR table, 9 entries at 0xc00fdf30
    PCI-Only Interrupts: none
    Location Bus Device Pin Link IRQs
    embedded 2 5 A 0x69 3
    embedded 2 8 A 0x68 9
    embedded 0 29 A 0x60 9
    embedded 0 29 B 0x63 9
    embedded 0 2 A 0x60 9
    embedded 0 1 A 0x60 9
    AcpiOsDerivePciId: bus 1 dev 0 func 0
    AcpiOsDerivePciId: bus 2 dev 5 func 0
    AcpiOsDerivePciId: bus 2 dev 5 func 1
    AcpiOsDerivePciId: bus 0 dev 31 func 0
    AcpiOsDerivePciId: bus 0 dev 31 func 0
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    AcpiOsDerivePciId: bus 0 dev 0 func 0
    AcpiOsDerivePciId: bus 0 dev 31 func 0
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    acpi_cpu0: <CPU> on acpi0
    acpi_tz0: <thermal zone> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    ---- initial configuration ------------------------
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
    \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
    \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0
    \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2
    \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3
    \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1
    ---- before setting priority for links ------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 0
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 0
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1050
    references: 1
    priority: 0
    ---- before fixup boot-disabled links -------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 2100
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 2100
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1050
    references: 1
    priority: 1050
    ---- after fixup boot-disabled links --------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 2100
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1050
    references: 2
    priority: 2100
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1050
    references: 1
    priority: 1050
    ---- arbitrated configuration ---------------------
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
    \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
    \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0
    \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2
    \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3
    \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1
    pci0: <ACPI PCI bus> on pcib0
    pci0: physical bus=0
    map[10]: type 3, range 32, base e0000000, size 28, enabled
    found-> vendor=0x8086, dev=0x3575, revid=0x02
    bus=0, slot=0, func=0
    class=06-00-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    found-> vendor=0x8086, dev=0x3576, revid=0x02
    bus=0, slot=1, func=0
    class=06-04-00, hdrtype=0x01, mfdev=0
    cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords)
    lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
    map[20]: type 4, range 32, base 00001800, size 5, enabled
    pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
    pcib0: slot 29 INTA is routed to irq 9
    found-> vendor=0x8086, dev=0x2482, revid=0x01
    bus=0, slot=29, func=0
    class=0c-03-00, hdrtype=0x00, mfdev=1
    cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=a, irq=9
    map[20]: type 4, range 32, base 00001820, size 5, enabled
    pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
    pcib0: slot 29 INTB is routed to irq 9
    found-> vendor=0x8086, dev=0x2484, revid=0x01
    bus=0, slot=29, func=1
    class=0c-03-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=b, irq=9
    map[20]: type 4, range 32, base 00001840, size 5, enabled
    found-> vendor=0x8086, dev=0x2487, revid=0x01
    bus=0, slot=29, func=2
    class=0c-03-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=c, irq=255
    found-> vendor=0x8086, dev=0x2448, revid=0x41
    bus=0, slot=30, func=0
    class=06-04-00, hdrtype=0x01, mfdev=0
    cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
    found-> vendor=0x8086, dev=0x248c, revid=0x01
    bus=0, slot=31, func=0
    class=06-01-00, hdrtype=0x00, mfdev=1
    cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    map[10]: type 4, range 32, base 000001f0, size 3, enabled
    map[14]: type 4, range 32, base 000003f4, size 2, enabled
    map[18]: type 4, range 32, base 00000170, size 3, enabled
    map[1c]: type 4, range 32, base 00000374, size 2, enabled
    map[20]: type 4, range 32, base 00001860, size 4, enabled
    map[24]: type 1, range 32, base d0000000, size 10, memory disabled
    found-> vendor=0x8086, dev=0x248a, revid=0x01
    bus=0, slot=31, func=1
    class=01-01-8a, hdrtype=0x00, mfdev=0
    cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=a, irq=255
    map[20]: type 4, range 32, base 00001880, size 5, enabled
    found-> vendor=0x8086, dev=0x2483, revid=0x01
    bus=0, slot=31, func=3
    class=0c-05-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=b, irq=255
    map[10]: type 4, range 32, base 00001c00, size 8, port disabled
    map[14]: type 4, range 32, base 000018c0, size 6, enabled
    pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
    pcib0: possible interrupts: 9
    pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB
    found-> vendor=0x8086, dev=0x2485, revid=0x01
    bus=0, slot=31, func=5
    class=04-01-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=b, irq=9
    map[10]: type 4, range 32, base 00002400, size 8, port disabled
    map[14]: type 4, range 32, base 00002000, size 7, enabled
    found-> vendor=0x8086, dev=0x2486, revid=0x01
    bus=0, slot=31, func=6
    class=07-03-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
    lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=b, irq=255
    agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device
    0.0 on pci0
    agp0: allocating GATT for aperture of size 228M
    pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    pcib1: secondary bus 1
    pcib1: subordinate bus 1
    pcib1: I/O decode 0x3000-0x3fff
    pcib1: memory decode 0xd0100000-0xd01fffff
    pcib1: prefetched decode 0xd8000000-0xdfffffff
    ---- initial configuration ------------------------
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
    ---- before setting priority for links ------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2100
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2100
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1150
    references: 1
    priority: 1050
    ---- before fixup boot-disabled links -------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2300
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2300
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1150
    references: 1
    priority: 1150
    ---- after fixup boot-disabled links --------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2300
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1150
    references: 2
    priority: 2300
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1150
    references: 1
    priority: 1150
    ---- arbitrated configuration ---------------------
    \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
    pci1: <ACPI PCI bus> on pcib1
    pci1: physical bus=1
    map[10]: type 3, range 32, base d8000000, size 27, enabled
    map[14]: type 4, range 32, base 00003000, size 8, enabled
    map[18]: type 1, range 32, base d0100000, size 16, enabled
    pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA)
    pcib1: slot 0 INTA is routed to irq 9
    found-> vendor=0x1002, dev=0x4c59, revid=0x00
    bus=1, slot=0, func=0
    class=03-00-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
    lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
    intpin=a, irq=9
    powerspec 2 supports D0 D1 D2 D3 current D0
    pci1: <display, VGA> at device 0.0 (no driver attached)
    uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f
    irq 9 at device 29.0 on pci0
    usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f
    irq 9 at device 29.1 on pci0
    usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at
    device 29.2 on pci0
    pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
    pcib0: possible interrupts: 9
    pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
    usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
    usb2: USB revision 1.0
    uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
    umass0:0:0:-1: Attached to scbus0
    pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
    pcib2: secondary bus 2
    pcib2: subordinate bus 2
    pcib2: I/O decode 0x4000-0x4fff
    pcib2: memory decode 0xd0200000-0xd02fffff
    pcib2: prefetched decode 0xfff00000-0xfffff
    ---- initial configuration ------------------------
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0
    \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0
    \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1
    \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0
    ---- before setting priority for links ------------
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1580
    references: 2
    priority: 2300
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1580
    references: 3
    priority: 2300
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1150
    \\_SB_.LNKF:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 0
    \\_SB_.LNKG:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 0
    ---- before fixup boot-disabled links -------------
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1580
    references: 3
    priority: 4740
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1580
    references: 2
    priority: 3160
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    \\_SB_.LNKF:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    \\_SB_.LNKG:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    ---- after fixup boot-disabled links --------------
    \\_SB_.LNKC:
    interrupts: 9
    penalty: 1580
    references: 3
    priority: 4740
    \\_SB_.LNKB:
    interrupts: 9
    penalty: 1580
    references: 2
    priority: 3160
    \\_SB_.LNKH:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    \\_SB_.LNKF:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    \\_SB_.LNKG:
    interrupts: 9
    penalty: 1580
    references: 1
    priority: 1580
    ---- arbitrated configuration ---------------------
    \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0
    \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0
    \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1
    \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0
    pci2: <ACPI PCI bus> on pcib2
    pci2: physical bus=2
    map[10]: type 1, range 32, base d0205000, size 11, enabled
    map[14]: type 1, range 32, base d0200000, size 14, enabled
    found-> vendor=0x104c, dev=0x8021, revid=0x02
    bus=2, slot=2, func=0
    class=0c-00-10, hdrtype=0x00, mfdev=0
    cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
    lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
    intpin=a, irq=255
    powerspec 2 supports D0 D2 D3 current D0
    pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKF)
    pcib2: possible interrupts: 9
    pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF
    found-> vendor=0x1180, dev=0x0476, revid=0x80
    bus=2, slot=5, func=0
    class=06-07-00, hdrtype=0x02, mfdev=1
    cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
    lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=a, irq=9
    powerspec 2 supports D0 D1 D2 D3 current D0
    found-> vendor=0x1180, dev=0x0476, revid=0x80
    bus=2, slot=5, func=1
    class=06-07-00, hdrtype=0x02, mfdev=1
    cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
    lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    intpin=b, irq=255
    powerspec 2 supports D0 D1 D2 D3 current D0
    map[10]: type 1, range 32, base d0204000, size 12, enabled
    map[14]: type 4, range 32, base 00004000, size 6, enabled
    pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE)
    pcib2: slot 8 INTA is routed to irq 9
    found-> vendor=0x8086, dev=0x1031, revid=0x41
    bus=2, slot=8, func=0
    class=02-00-00, hdrtype=0x00, mfdev=0
    cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
    lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
    intpin=a, irq=9
    powerspec 2 supports D0 D1 D2 D3 current D0
    fwohci0: <Texas Instruments TSB43AA22> mem
    0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2
    fwohci0: latency timer 64 -> 64.
    fwohci0: cache size 8 -> 8.
    pcib2: device fwohci0 requested decoded memory range 0xd0205000-0xd02057ff
    pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKC)
    pcib2: slot 2 INTA is routed to irq 9
    fwohci0: OHCI version 1.0 (ROM=1)
    fwohci0: No. of Isochronous channel is 4.
    fwohci0: EUI64 08:00:46:03:00:d8:58:63
    fwohci0: resetting OHCI...done (loop=0)
    fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
    fwohci0: phy read failed(2).
    fwohci0: fwphy_rddata: 0x3 loop=0, retry=1
    fwohci0: Phy 1394a available S400, 2 ports.
    fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
    fwohci0: Enable 1394a Enhancements
    fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
    fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
    fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
    fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
    fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
    fwohci0: Link S400, max_rec 2048 bytes.
    fwohci0: BUS_OPT 0xa002 -> 0xf800a002
    fwohci0: fwohci_set_intr: 1
    firewire0: <IEEE1394(FireWire) bus> on fwohci0
    if_fwe0: <Ethernet over FireWire> on firewire0
    if_fwe0: Fake Ethernet address: 0a:00:46:d8:58:63
    fwe0: bpf attached
    sbp0: <SBP2/SCSI over firewire> on firewire0
    sbp_attach (cold=1)
    fwohci0: Initiate bus reset
    fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
    fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
    fwohci0: BUS reset
    sbp_post_busreset
    fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    fwohci0: fw_set_bus_manager: 0->0 (loop=0)
    firewire0: bus manager 0 (me)
    send phy_config root_node=-1 gap_count=5
    fwohci0: maxdesc: 2
    fwohci0: start AT DMA status=0
    cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
    pcib2: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    cbb0: PCI Configuration space:
      0x00: 0x04761180 0x02100007 0x06070080 0x00824000
      0x10: 0xd0200000 0x020000dc 0x20000000 0xfffff000
      0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
      0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109
      0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
      0x50: 0x00000000 0x00000000 0x00000000 0x00000000
      0x60: 0x00000000 0x00000000 0x00000000 0x00000000
      0x70: 0x00000000 0x00000000 0x00000000 0x00000000
      0x80: 0x00a20001 0x00000000 0x04630463 0x30000000
      0x90: 0x00000000 0x00000000 0x00000000 0x00000000
      0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
      0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
      0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
      0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
      0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
      0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
    cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2
    pcib2: device cbb1 requested decoded memory range 0xd0200000-0xd02fffff
    cardbus1: <CardBus bus> on cbb1
    pccard1: <16-bit PCCard bus> on cbb1
    pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKG)
    pcib2: possible interrupts: 9
    pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
    cbb1: PCI Configuration space:
      0x00: 0x04761180 0x02100007 0x06070080 0x00824000
      0x10: 0xd0201000 0x020000dc 0x20000000 0xfffff000
      0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
      0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209
      0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
      0x50: 0x00000000 0x00000000 0x00000000 0x00000000
      0x60: 0x00000000 0x00000000 0x00000000 0x00000000
      0x70: 0x00000000 0x00000000 0x00000000 0x00000000
      0x80: 0x00a20001 0x00000000 0x04630463 0x30000000
      0x90: 0x00000000 0x00000000 0x00000000 0x00000000
      0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
      0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
      0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
      0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
      0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
      0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
    fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem
    0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
    pcib2: device fxp0 requested decoded memory range 0xd0204000-0xd0204fff
    fxp0: using memory space register mapping
    fxp0: Ethernet address 08:00:46:43:83:a5
    fxp0: PCI IDs: 8086 1031 104d 80e7 0041
    fxp0: Dynamic Standby mode is disabled
    miibus0: <MII bus> on fxp0
    inphy0: <i82562ET 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp0: bpf attached
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH3 UDMA100 controller> port
    0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
    0xd0000000-0xd00003ff at device 31.1 on pci0
    ata0: pre reset mask=03 ostat0=50 ostat2=00
    ata0-slave: ATAPI 00 00
    ata0-master: ATAPI 00 00
    ata0: after reset mask=03 stat0=50 stat1=00
    ata0-master: ATA 01 a5
    ata0: devices=01
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: pre reset mask=03 ostat0=50 ostat2=00
    ata1-master: ATAPI 14 eb
    ata1-slave: ATAPI 00 00
    ata1: after reset mask=03 stat0=00 stat1=01
    ata1: devices=04
    ata1: at 0x170 irq 15 on atapci0
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    pci0: <multimedia, audio> at device 31.5 (no driver attached)
    pci0: <simple comms> at device 31.6 (no driver attached)
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    atkbd: the current kbd controller command byte 0047
    atkbd: keyboard ID 0x41ab (2)
    kbd0 at atkbd0
    kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
    psm0: unable to allocate IRQ
    psmcpnp0 irq 12 on acpi0
    psm0: current command byte:0047
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
    psm0: config:00000000, flags:00000000, packet size:3
    psm0: syncmask:c0, syncbits:00
    acpi_ec0: <embedded controller: GPE 0x1c> port 0x66,0x62 on acpi0
    sio0: irq maps: 0x209 0x219 0x209 0x209
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    ppc0: using extended I/O port range
    ppc0: ECP SPP ECP+EPP SPP
    ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/15 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lp0: bpf attached
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    unknown: not probed (disabled)
    acpi_cmbat0: <Control method Battery> on acpi0
    acpi_cmbat1: <Control method Battery> on acpi0
    acpi_acad0: <AC adapter> on acpi0
    acpi_ec0: info: new max delay is 3 us
    acpi_ec0: info: new max delay is 4 us
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    acpi_ec0: info: new max delay is 10 us
    ata: ata0 already exists; skipping it
    ata: ata1 already exists; skipping it
    atkbdc: atkbdc0 already exists; skipping it
    ppc: ppc0 already exists; skipping it
    sio: sio0 already exists; skipping it
    Trying Read_Port at 203
    Trying Read_Port at 243
    Trying Read_Port at 283
    Trying Read_Port at 2c3
    Trying Read_Port at 303
    Trying Read_Port at 343
    Trying Read_Port at 383
    Trying Read_Port at 3c3
    ex_isa_identify()
    sc: sc0 already exists; skipping it
    vga: vga0 already exists; skipping it
    isa_probe_children: disabling PnP devices
    isa_probe_children: probing non-PnP devices
    orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff
    on isa0
    pmtimer0 on isa0
    adv0: not probed (disabled)
    aha0: not probed (disabled)
    aic0: not probed (disabled)
    bt0: not probed (disabled)
    cs0: not probed (disabled)
    ed0: not probed (disabled)
    fdc0: ready for input in output
    fdc0: cmd 3 failed at out byte 1 of 3
    fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    fe0: not probed (disabled)
    ie0: not probed (disabled)
    le0: not probed (disabled)
    lnc0: not probed (disabled)
    pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
    pcic1: not probed (disabled)
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    sio1: irq maps: 0x209 0x209 0x209 0x209
    sio1: probe failed test(s): 0 1 2 4 6 7 9
    sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
    sio2: not probed (disabled)
    sio3: not probed (disabled)
    sn0: not probed (disabled)
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    fb0: vga0, vga, type:VGA (5), flags:0x7007f
    fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
    fb0: init mode:24, bios mode:3, current mode:24
    fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
    vga0: vga: WARNING: video mode switching is not fully supported on this
    adapter
    VGA parameters upon power-up
    50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
    97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
    98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    VGA parameters in BIOS for mode 24
    50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
    bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
    b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    EGA/VGA parameters to be used for mode 24
    50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
    97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
    98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    vt0: not probed (disabled)
    isa_probe_children: probing PnP devices
    Device configuration finished.
    procfs registered
    Timecounter "TSC" frequency 1193108906 Hz quality 800
    Timecounters tick every 10.000 msec
    lo0: bpf attached
    Current DB 0
    ch = 0
     Current OP KEY INT BR len Addr Depend Stat: Cnt
    1f02c000 OUTL ST2 ALL ALL 12 00000000 1f02c080 8411:0009 RUN,ACTIVE, ack
    complete(11)
    0x000000e0 0x00450000 0xffbaffff 0x00000000
    acpi_cmbat0: battery initialization start
    acpi_cmbat0: battery initialization done, tried 1 times
    acpi_cmbat1: battery initialization start
    acpi_acad0: acline initialization start
    acpi_acad0: On Line
    acpi_acad0: acline initialization done, tried 1 times
    cbb0: Unsupported card type detected
    cbb1: Unsupported card type detected
    ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
    ad0: setting UDMA100 on Intel ICH3 chip
    ad0: <IC25N030ATDA04-0/DA4OA76A> ATA-5 disk at ata0-master
    ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
    ad0: 16 secs/int, 1 depth queue, UDMA100
    GEOM: new disk ad0
    ar: FreeBSD check1 failed
    ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
    acd0: setting PIO4 on Intel ICH3 chip
    acd0: <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N/0010> CDRW drive at ata1 as master
    acd0: read 1722KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer,
    PIO4
    acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
    acd0: Writes: CDR, CDRW, test write, burnproof
    acd0: Audio: play, 256 volume levels
    acd0: Mechanism: ejectable tray, unlocked
    acd0: Medium: no/blank disc
    [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/5/63 s:63 l:8385867
    [1] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/11/63 s:8385993 l:8385867
    [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/1/63 s:16771860 l:8385930
    [3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/15/63 s:25157790 l:33447330
    GEOM: Configure ad0s1, start 32256 length 4293563904 end 4293596159
    GEOM: Configure ad0s2, start 4293628416 length 4293563904 end 8587192319
    GEOM: Configure ad0s3, start 8587192320 length 4293596160 end 12880788479
    GEOM: Configure ad0s4, start 12880788480 length 17125032960 end 30005821439
    GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
    GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
    GEOM: Configure ad0s3c, start 0 length 4293596160 end 4293596159
    GEOM: Configure ad0s3e, start 402653184 length 268435456 end 671088639
    GEOM: Configure ad0s3f, start 671088640 length 268435456 end 939524095
    GEOM: Configure ad0s3g, start 939524096 length 3354072064 end 4293596159
    bus_explore done
    sbp_post_explore (sbp_cold=2)
    (probe1:sbp0:0:0:0): error 22
    (probe1:sbp0:0:0:0): Unretryable Error
    (probe4:sbp0:0:3:0): error 22
    (probe4:sbp0:0:3:0): Unretryable Error
    (probe5:sbp0:0:4:0): error 22
    (probe5:sbp0:0:4:0): Unretryable Error
    (probe6:sbp0:0:5:0): error 22
    (probe6:sbp0:0:5:0): Unretryable Error
    (probe7:sbp0:0:6:0): error 22
    (probe7:sbp0:0:6:0): Unretryable Error
    (probe2:sbp0:0:1:0): error 22
    (probe2:sbp0:0:1:0): Unretryable Error
    (probe3:sbp0:0:2:0): error 22
    (probe3:sbp0:0:2:0): Unretryable Error
    (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
    (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:0): Medium not present
    (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0
    24 0
    (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:0): Medium not present
    Unretryable error
    (probe0:umass-sim0:0:0:0): error 6
    (probe0:umass-sim0:0:0:0): Unretryable Error
    Mounting root from ufs:/dev/ad0s3a
    WARNING: / was not properly dismounted
    start_init: trying /sbin/init
    WARNING: /tmp was not properly dismounted
    WARNING: /usr was not properly dismounted
    WARNING: /var was not properly dismounted

    ----- Original Message -----
    From: Andre Guibert de Bruet
    To: Putinas
    Cc: freebsd-current@freebsd.org
    Sent: Friday, August 29, 2003 22:28 PM
    Subject: Re: sony vaio pcg-gr390

    On Fri, 29 Aug 2003, Putinas wrote:

    > I tried to check might be my problem with choppy sound is fixed on my
    notebook ( definitly has problems with interupts and acpi , because sound
    becomes more or less acceptable if I make ping -f something outside - sound
    card and network uses same interupt ).
    > I upgraded to latest src, compile GENERIC, reboot... and whops:
    > hanging where initializing pcmcia ( or the something what goes after this
    ? ) this is if I boot with ACPI enabled.
    > If I boot with acpi disabled - panic and debuging screen ...
    >
    > So just to pay developers attention to this problem .. because I saw
    already to mails about notebooks and acpi ...

    Could you boot -v with acpi enabled and post the log somewhere?

    > Andre Guibert de Bruet | Enterprise Software Consultant >
    > Silicon Landmark, LLC. | http://siliconlandmark.com/ >

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Matthias Andree: "Re: 2 ports broken after gcc import"