Re: fxp0: device timeout in -current from 31.8.

From: Bernd Walter (ticso_at_cicely12.cicely.de)
Date: 08/31/03

  • Next message: raoul.megelas: "pcmcia card not detected properly" 
    Date: Sun, 31 Aug 2003 15:24:36 +0200
To: Andreas Klemm <andreas@freebsd.org>

    On Sun, Aug 31, 2003 at 01:55:49PM +0200, Andreas Klemm wrote:
    > I tried to install FreeBSD 5.1-current from 30.07. and 31.08
    > on my wifes machine. Unluckily I experience problems with the
    > fxp driver.
    >
    > On google I found a similar report from June 3rd.
    > http://lists.freebsd.org/pipermail/freebsd-current/2003-June/004739.html
    >
    > What I tried: since USB and fxp driver shared the same IRQ I
    > disabled USB in the BIOS and made sure, that the NIC has an
    > IRQ of its own, but still no success.

    Sounds like IRQ9 support is broken.
    Everything using IRQ9 (uhci0/1 and fxp0) fails in a similar way.

    > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci
    > 0
    > usb0: <VIA 83C572 USB controller> on uhci0
    > usb0: USB revision 1.0
    > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub0: 2 ports with 2 removable, self powered
    > uhub0: port error, restarting port 1
    > uhub0: port error, giving up port 1
    > uhub0: port error, restarting port 2
    > uhub0: port error, giving up port 2
    > uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci
    > 0
    > usb1: <VIA 83C572 USB controller> on uhci1
    > usb1: USB revision 1.0
    > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub1: 2 ports with 2 removable, self powered
    > uhub1: port error, restarting port 1
    > uhub1: port error, giving up port 1
    > uhub1: port error, restarting port 2
    > uhub1: port error, giving up port 2
    > fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb000-0xb03f mem 0xed000000-0xed0ffff
    > f,0xed800000-0xed800fff irq 9 at device 10.0 on pci0
    > fxp0: Ethernet address 00:d0:b7:bd:03:b3
    > miibus0: <MII bus> on fxp0
    > inphy0: <i82555 10/100 media interface> on miibus0
    > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 

    -- 
B.Walter                   BWCT                http://www.bwct.de
ticso@bwct.de                                  info@bwct.de
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
  • Next message: raoul.megelas: "pcmcia card not detected properly"