IDE Card Reader

From: David L (dlodeiro_at_inspired.net.au)
Date: 09/07/03

  • Next message: Mark Dixon: "LS120, ATANg and Atapicam" 
    To: freebsd-current@freebsd.org
Date: Sun, 7 Sep 2003 09:14:12 +1000

    I'm trying to use a IDE SD, MS, CF, SM card reader ( it slots into the 3.5
    inch floppy slot and uses an IDE port instead of USB ) on my FreeBSD 5.1
    Release system. This piece of hardware is not in any of the suppported
    hardware list but I thought Id place post this incase anyone has had any
    experience with them or can tell me what the error means.

    If I have the card reader installed ( detected by BIOS as a IOMEGA ZIP drive )
    it reboots after probing all the devices, following is the dmesg.

    pci0: <multimedia, video> at device 11.0 (no driver attached)
    pci0: <network, ethernet> at device 12.0 (no driver attached)
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
    0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
    fdc0: FIFO enabled, 8 bytes threshold
    ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    sio1 port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounters tick every 10.000 msec
    fwohci0: BUS reset
    fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    firewire0: bus manager 0 (me)
    acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
    ad2: DMA limited to UDMA33, non-ATA66 cable or device
    ad2: 57241MB <ST360021A> [116301/16/63] at ata1-master UDMA33
    acd0: CD-RW <LITE-ON LTR-52246S> at ata0-master PIO4
    acd1: DVD-ROM <LITEON DVD-ROM LTD163D> at ata0-slave PIO4

    Fatal trap 18: integer divide fault while in kernel mode
    instruction pointer = 0x8:0xc01d4ee6
    stack pointer = 0x10:0xd67bcc60
    frame pointer = 0x10:0xd67bcca8
    code segment = base 0x0, limit 0xfffff, type 0x1b
                            = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 24 (irq15: ata1)
    trap number = 18
    panic: integer divide fault

    If any more info is required please let me know

    Thanks

    David

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Mark Dixon: "LS120, ATANg and Atapicam"

    Relevant Pages