ATA problems(unlean fs) on recent cvsup
From: Alastair G. Hogge (agh_at_tpg.com.au)
Date: 09/14/03
- Previous message: Jun Kuriyama: "Re: 'cd /usr/src/etc; make distribute' broken."
- Next in thread: Alastair G. Hogge: "Re: ATA problems(unlean fs) on recent cvsup"
- Reply: Alastair G. Hogge: "Re: ATA problems(unlean fs) on recent cvsup"
- Reply: Simon Brown: "Re: ATA problems(unlean fs) on recent cvsup"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: <current@freebsd.org> Date: Sun, 14 Sep 2003 15:52:33 +1000
Hello list,
I've recently cvsup'd current (14th of Sep). After a build and install
world/kernel I rebooted to find some new and interesting kernel messages
about ata? MPSAFE. Well as the booting continued I notcied the machine was
going through more disk activity then usal. It was also taking alot longer
to actully start. Eventully the kernel dropped into single user mode.
It appears my filesystem is playing up for some reason. I haven't had any
power failures for random hangs/reboots.
After the recent cvsup my /usr fs appears to be coruppt or something. In
single user mode I'm unable fix the problem with fsck. At first when I had
softupdates /usr fsck would give me messages like "UNEXPECTED SOFT UPDATE
INCONSISTENCY" I turned of softupate to see if it would help...it didn't. I
still can't fix the fs. I get output like "CANNOT WRITE BLK: xxx" and I'm
always unable to salvage blks and what not.
Anyway my dmesg is as follows:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sun Sep 14 12:59:35 EST 2003
agh@nova:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.GENERIC/kernel" at 0xc0760000.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc076024c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536854528 (511 MB)
avail memory = 513466368 (489 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S8X > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1720
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 3 INTA is routed to irq 9
pcib0: slot 3 INTB is routed to irq 9
pcib0: slot 3 INTC is routed to irq 9
pcib0: slot 14 INTA is routed to irq 11
agp0: <SiS 648 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: vendor=1039, dev=7007
fwohci0: <1394 Open Host Controller Interface> mem 0xde800000-0xde800fff at
device 2.3 on pci0
pcib0: slot 2 INTB is routed to irq 5
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:0a:83:4c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:0a:83:4c
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
atapci0: <SiS 963 UDMA133 controller> port
0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 11
at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xde000000-0xde000fff irq 9 at device
3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: KYE Genius USB Wheel Mouse, rev 1.00/2.42, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xdd800000-0xdd800fff irq 9 at device
3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xdd000000-0xdd000fff irq 9 at device
3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
pci0: <input device> at device 9.1 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x8800-0x88ff mem
0xdb800000-0xdb8000ff at device 10.0 on pci0
pcib0: slot 10 INTA is routed to irq 11
rl0: Ethernet address: 00:50:bf:77:3c:97
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise PDC20376 SATA150 controller> port
0x7800-0x787f,0x8000-0x800f,0x8400-0x843f mem
0xda800000-0xda81ffff,0xdb000000-0xdb000fff irq 11 at device 14.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xdb000000 on atapci1
ata2: [MPSAFE]
ata3: at 0xdb000000 on atapci1
ata3: [MPSAFE]
ata4: at 0xdb000000 on atapci1
ata4: [MPSAFE]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2533054700 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc4169a70
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA133
acd0: CDRW <SONY CD-RW CRX175E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
Please CC me.
Thanks in advance
-Al
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
- Previous message: Jun Kuriyama: "Re: 'cd /usr/src/etc; make distribute' broken."
- Next in thread: Alastair G. Hogge: "Re: ATA problems(unlean fs) on recent cvsup"
- Reply: Alastair G. Hogge: "Re: ATA problems(unlean fs) on recent cvsup"
- Reply: Simon Brown: "Re: ATA problems(unlean fs) on recent cvsup"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
