more panics from current
From: Tomi Vainio - Sun Finland (Tomi.Vainio_at_Sun.COM)
Date: 09/27/03
- Previous message: Roderick van Domburg: "Status of SCHED_ULE?"
- Next in thread: Tomi Vainio - Sun Finland: "more panics from current (partII)"
- Reply: Tomi Vainio - Sun Finland: "more panics from current (partII)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 27 Sep 2003 20:10:03 +0300 To: freebsd-current@freebsd.org
Once again our current platform is unstable. Two weeks ago we had
problems with kmem allocator and this was "fixed" by adding more
memory and Dag-Erling Smørgrav still investigating those panics. Now
we got different looking panic and there is core available if someone
wants to take a peek on it.
Tomppa
---clipclip---
kernel trap 19 with interrupts disabled
NMI ... going to debugger
kernel: type 19 trap, code=0
Stopped at sched_ithd+0x1d: movl $0x1,%eax
db> trace
sched_ithd(a) at sched_ithd+0x1d
Xintr10() at Xintr10+0x6c
--- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc ---
cpu_idle(73042444,890002c0,bde8241c,c7ffff80,10c2444) at cpu_idle+0x22
idle_proc(0,cd680d48,c7000000,50082444,c70000df) at idle_proc+0x25
fork_exit(c01ecd40,0,cd680d48) at fork_exit+0xb1
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcd680d7c, ebp = 0 ---
db>
sched_ithd(a) at sched_ithd+0x1d
Xintr10() at Xintr10+0x6c
--- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc ---
db>
sched_ithd(a) at sched_ithd+0x1d
Xintr10() at Xintr10+0x6c
--- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc ---
db> panic
panic: from debugger
Debugger("panic")
Fatal trap 3: breakpoint instruction fault while in kernel mode
instruction pointer = 0x8:0xc0375b34
stack pointer = 0x10:0xcd680a70
frame pointer = 0x10:0xcd680a7c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = IOPL = 0
current process = 11 (idle)
Stopped at sched_ithd+0x1d: movl $0x1,%eax
db>
panic: from debugger
Uptime: 4h49m49s
Dumping 255 MB
16 32 48 64 80 96 112 128 144 160 176 192 208 224 240
Dump complete
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS drive E: is disk3
BIOS drive F: is disk4
BIOS drive G: is disk5
BIOS drive H: is disk6
BIOS drive I: is disk7
BIOS drive J: is disk8
BIOS drive K: is disk9
BIOS 639kB/261056kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(x@iki.fi, Sun Sep 7 22:26:04 EEST 2003)
Loading /boot/defaults/loader.conf
|/boot/kernel/kernel text=0x2e50e4 data=0x2e854+0x51be8 syms=[0x4+0x39f60+0x4+0x46e72]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel]...
|/boot/kernel/acpi.ko text=0x3b1f4 /-\data=0x170c+0xec0 |syms=[0x4+0x5bf0/+0x4+0x7a42-\]
|/-SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=01 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000000fef0000
SMAP type=03 base=000000000fff3000 len=000000000000d000
SMAP type=04 base=000000000fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sat Sep 13 01:27:45 EEST 2003
x@iki.fi:/u/FreeBSD/src/sys/i386/compile/TIIKELI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0535000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05351f4.
Calibrating clock(s) ... i8254 clock: 1193367 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 634775245 Hz
CPU: Intel Celeron (634.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x000000000055c000 - 0x000000000fb49fff, 257875968 bytes (62958 pages)
avail memory = 255086592 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb080
bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb520
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bf00 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fde70
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 19 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 D 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.FDC0._CRS] (Node 0
xc2592600), AE_AML_UNINITIALIZED_LOCAL
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.FDC0._CRS] (Node 0
xc2592600), AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on ac
pi0
---- initial configuration ------------------------
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.3
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.2
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.3
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.3
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.0
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.1
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.2
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.3
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.0
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.1
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.2
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.3
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
9.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
7.3
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.2
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
5.3
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
3.3
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.0
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.1
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.2
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
1.3
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.0
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.1
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.2
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9
.3
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.0
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.1
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.2
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8
.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7
.3
\_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.0
\_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.1
\_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.2
\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1
.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d000, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0024, revid=0x03
bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 1, range 32, base df020000, size 12, enabled
pcib0: matched entry for 0.11.INTA (source \_SB_.PCI0.LNKD)
pcib0: slot 11 INTA is routed to irq 11
found-> vendor=0x9004, dev=0x8178, revid=0x00
bus=0, slot=11, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base d4000000, size 25, enabled
pcib0: matched entry for 0.15.INTA (source \_SB_.PCI0.LNKB)
pcib0: slot 15 INTA is routed to irq 12
found-> vendor=0x5333, dev=0x88f0, revid=0x00
bus=0, slot=15, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 4, range 32, base 0000d800, size 3, enabled
map[14]: type 4, range 32, base 0000dc00, size 2, enabled
map[18]: type 4, range 32, base 0000e000, size 3, enabled
map[1c]: type 4, range 32, base 0000e400, size 2, enabled
map[20]: type 4, range 32, base 0000e800, size 6, enabled
map[24]: type 1, range 32, base df000000, size 17, enabled
pcib0: matched entry for 0.17.INTA (source \_SB_.PCI0.LNKA)
pcib0: slot 17 INTA is routed to irq 10
found-> vendor=0x105a, dev=0x4d30, revid=0x02
bus=0, slot=17, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at d
evice 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci
0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata0-slave: ATA err=0x01 lsb=0xa5
ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata1-slave: ATA err=0x01 lsb=0xa5
ata1: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <PCI-PCI bridge> at device 9.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xdc000000-0xddffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000c000, size 7, enabled
map[14]: type 1, range 32, base dd000000, size 10, enabled
pcib0: matched entry for 0.9.INTA (source \_SB_.PCI0.LNKB)
pcib0: slot 9 INTA is routed to irq 12
pcib2: slot 4 INTA is routed to irq 12
found-> vendor=0x1011, dev=0x0019, revid=0x41
bus=2, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=12
map[10]: type 4, range 32, base 0000c400, size 7, enabled
map[14]: type 1, range 32, base dd001000, size 10, enabled
pcib0: matched entry for 0.9.INTB (source \_SB_.PCI0.LNKA)
pcib0: slot 9 INTB is routed to irq 10
pcib2: slot 5 INTA is routed to irq 10
found-> vendor=0x1011, dev=0x0019, revid=0x41
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 0000c800, size 7, enabled
map[14]: type 1, range 32, base dd002000, size 10, enabled
pcib0: matched entry for 0.9.INTC (source \_SB_.PCI0.LNKD)
pcib0: slot 9 INTC is routed to irq 11
pcib2: slot 6 INTA is routed to irq 11
found-> vendor=0x1011, dev=0x0019, revid=0x41
bus=2, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000cc00, size 7, enabled
map[14]: type 1, range 32, base dd003000, size 10, enabled
pcib0: matched entry for 0.9.INTD (source \_SB_.PCI0.LNKC)
pcib0: slot 9 INTD is routed to irq 5
pcib2: slot 7 INTA is routed to irq 5
found-> vendor=0x1011, dev=0x0019, revid=0x41
bus=2, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=5
dc0: <Intel 21143 10/100BaseTX> port 0xc000-0xc07f mem 0xdd000000-0xdd0003ff irq
12 at device 4.0 on pci2
pcib2: device dc0 requested decoded I/O range 0xc000-0xc07f
dc0: Ethernet address: 00:c0:95:e5:07:38
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc1: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem 0xdd001000-0xdd0013ff irq
10 at device 5.0 on pci2
pcib2: device dc1 requested decoded I/O range 0xc400-0xc47f
dc1: Ethernet address: 00:c0:95:e5:07:39
miibus1: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> on miibus1
dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: bpf attached
dc2: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xdd002000-0xdd0023ff irq
11 at device 6.0 on pci2
pcib2: device dc2 requested decoded I/O range 0xc800-0xc87f
dc2: Ethernet address: 00:c0:95:e5:07:3a
miibus2: <MII bus> on dc2
dcphy2: <Intel 21143 NWAY media interface> on miibus2
dcphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: bpf attached
dc3: <Intel 21143 10/100BaseTX> port 0xcc00-0xcc7f mem 0xdd003000-0xdd0033ff irq
5 at device 7.0 on pci2
pcib2: device dc3 requested decoded I/O range 0xcc00-0xcc7f
dc3: Ethernet address: 00:c0:95:e5:07:3b
miibus3: <MII bus> on dc3
dcphy3: <Intel 21143 NWAY media interface> on miibus3
dcphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: bpf attached
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xdf020000-0xdf02
0fff irq 11 at device 11.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 448 instructions downloaded
ahc0: Features 0x5, Bugs 0x25, Flags 0x20481540
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <display, VGA> at device 15.0 (no driver attached)
atapci1: <Promise PDC20267 UDMA100 controller> port 0xe800-0xe83f,0xe400-0xe403,
0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xdf000000-0xdf01ffff irq 10 at de
vice 17.0 on pci0
atapci1: [MPSAFE]
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata2-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: at 0xd800 on atapci1
ata2: [MPSAFE]
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata3-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata3: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata3: at 0xe000 on atapci1
ata3: [MPSAFE]
fdc0: cannot reserve I/O port range (1 ports)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
fdc0: cannot reserve I/O port range (1 ports)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
vt: vt0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf000-0xd0fff,0xc8000-0xcefff,0xc0000-0xc7fff on
isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 634775245 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x50 error=0x01 reason=0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc269cb70
ad0: <ST3120023A/3.31> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039
ad1: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad1 dp=0xc269c770
ad1: <ST3120023A/3.31> ATA-6 disk at ata0-slave
ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ar: FreeBSD check1 failed
GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad0s1d, start 0 length 120031478784 end 120031478783
GEOM: new disk ad1
ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039
ad2: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad2 dp=0xc2626c70
ad2: <ST3120023A/3.31> ATA-6 disk at ata1-master
ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA33
GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad1s1d, start 0 length 120031478784 end 120031478783
GEOM: new disk ad2
ar: FreeBSD check1 failed
ad3: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad3 dp=0xc2626a70
ad3: <ST3120023A/3.31> ATA-6 disk at ata1-slave
ad3: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA33
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 120031478784 end 120031511039
ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: new disk ad3
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad4: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad4 dp=0xc269c670
ad4: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata2-master
ad4: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad2s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad2s1d, start 0 length 120031478784 end 120031478783
ar: Promise check1 failed
ad5: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad5 dp=0xc2626e70
ad5: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata2-slave
ad5: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 120031478784 end 120031511039
ar: Promise check1 failed
GEOM: new disk ad4
ata3-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: new disk ad5
ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad6: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad6 dp=0xc26a4d70
ad6: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata3-master
ad6: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad3s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad3s1d, start 0 length 120031478784 end 120031478783
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 160039240704 end 160039272959
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 160039240704 end 160039272959
GEOM: new disk ad6
GEOM: Configure ad4s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad4s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad4s1d, start 0 length 160039240704 end 160039240703
GEOM: Configure ad5s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad5s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad5s1d, start 0 length 160039240704 end 160039240703
ad6: WARNING - READ_DMA recovered from missing interrupt
ar: Promise check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 160039240704 end 160039272959
ad7: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad7 dp=0xc26a4b70
ad7: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata3-slave
ad7: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad7: 16 secs/int, 1 depth queue, UDMA100
ad7: WARNING - READ_DMA recovered from missing interrupt
ar: Promise check1 failed
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: Configure ad6s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad6s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad6s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad7
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad7s1, start 32256 length 160039240704 end 160039272959
GEOM: Configure ad7s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad7s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad7s1d, start 0 length 160039240704 end 160039240703
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
GEOM: create disk da0 dp=0xc26af050
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
pass0: Serial Number LA691693
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
da0: Serial Number LA691693
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
GEOM: Configure da0s1a, start 524288000 length 1073741824 end 1598029823
GEOM: Configure da0s1b, start 0 length 524288000 end 524287999
GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423
GEOM: Configure da0s1d, start 1598029824 length 7499097600 end 9097127423
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_tz0: _CRT value is absurd, ignored (200.0C)
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
kernel dumps on /dev/da0s1b
vinum: loaded
vinum: reading configuration from /dev/ad7s1d
vinum: updating configuration from /dev/ad6s1d
vinum: updating configuration from /dev/ad5s1d
vinum: updating configuration from /dev/ad4s1d
vinum: updating configuration from /dev/ad0s1d
vinum: updating configuration from /dev/ad1s1d
vinum: updating configuration from /dev/ad2s1d
vinum: updating configuration from /dev/ad3s1d
vinum: plex wareez.p1 does not have at least 3 subdisks
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: 17990 files, 215283 used, 300068 free (13988 frags, 35760 blocks, 2
.7% fragmentation)
/dev/da0s1d: DEFER FOR BACKGROUND CHECKING
^CWARNING: /u was not properly dismounted
Setting hostname: iki.fi.
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 193.64.243.175 netmask 0xffffffe0 broadcast 193.64.243.191
inet6 fe80::2c0:95ff:fee5:738%dc0 prefixlen 64 tentative scopeid 0x1
ether 00:c0:95:e5:07:38
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 193.64.243.190
Additional routing options:.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.accept_rtadv: 0 -> 1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
hw.bus.devctl_disable: 0 -> 1
Mounting NFS file systems:.
Starting syslogd.
Sep 27 19:48:32 tiikeli syslogd: kernel boot file is /boot/kernel/kernel
Checking for core dump...
savecore: reboot after panic: from debugger
Sep 27 19:48:45 tiikeli savecore: reboot after panic: from debugger
savecore: writing core to vmcore.1
Starting ntpdate.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 11 at de
vice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Starting local daemons:.
Updating motd.
Starting ntpd.
Sep 27 19:49:32 tiikeli ntpd[403]: configure: keyword "gateway.oh2ch.org" unknow
n, line ignored
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization: proftpd Samba (skipping setiathome.sh, not executa
ble).
Additional TCP options:.
Sat Sep 27 19:49:36 EEST 2003
FreeBSD/i386 (iki.fi) (ttyd0)
login:
(da0:ahc0:0:0:0): Queue Full
(da0:ahc0:0:0:0): tagged openings now 64
(da0:ahc0:0:0:0): Retrying Command
(da0:ahc0:0:0:0): Queue Full
(da0:ahc0:0:0:0): tagged openings now 63
(da0:ahc0:0:0:0): Retrying Command
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
- Previous message: Roderick van Domburg: "Status of SCHED_ULE?"
- Next in thread: Tomi Vainio - Sun Finland: "more panics from current (partII)"
- Reply: Tomi Vainio - Sun Finland: "more panics from current (partII)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
