Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R

From: Stephane Raimbault (segr_at_hotmail.com)
Date: 11/03/03

  • Next message: Andreas Klemm: "APM not working on Dell Latitude D600" 
    To: kuriyama@imgsrc.co.jp
Date: Mon, 03 Nov 2003 10:46:42 -0700

    Hi Jun,

    Thank you for your suggestion. I am now using the boot floppy with
    /boot/loader -hv and it has given me more information, but it still is not
    working... Does anyone have any thoughts on this? Should I try taking this
    box out of the rack and try it with a monitor? Will that make any
    diffrence?

    FreeBSD/i386 boot
    Default: 0:fd(0,a)/boot/loader
    boot:
    Uncompressing ... done
                          Console: serial port
    BIOS drive A: is disk0
    BIOS drive C: is disk1
    BIOS 633kB/4061120kB available memory

    FreeBSD/i386 bootstrap loader, Revision 1.1
    (root@ushi.jp.freebsd.org, Wed Oct 29 04:14:01 GMT 2003)
    >include /boot/device.hints
    >set hint.fdc.0.at="isa"
    >set hint.fdc.0.port="0x3F0"
    >set hint.fdc.0.irq="6"
    >set hint.fdc.0.drq="2"
    >set hint.fd.0.at="fdc0"
    >set hint.fd.0.drive="0"
    >set hint.fd.1.at="fdc0"
    >set hint.fd.1.drive="1"
    >set hint.ata.0.at="isa"
    >set hint.ata.0.port="0x1F0"
    >set hint.ata.0.irq="14"
    >set hint.ata.1.at="isa"
    >set hint.ata.1.port="0x170"
    >set hint.ata.1.irq="15"
    >set hint.adv.0.at="isa"
    >set hint.adv.0.disabled="1"
    >set hint.bt.0.at="isa"
    >set hint.bt.0.disabled="1"
    >set hint.aha.0.at="isa"
    >set hint.aha.0.disabled="1"
    >set hint.aic.0.at="isa"
    >set hint.aic.0.disabled="1"
    >set hint.atkbdc.0.at="isa"
    >set hint.atkbdc.0.port="0x060"
    >set hint.atkbd.0.at="atkbdc"
    >set hint.atkbd.0.irq="1"
    >set hint.atkbd.0.flags="0x1"
    >set hint.psm.0.at="atkbdc"
    >set hint.psm.0.irq="12"
    >set hint.vga.0.at="isa"
    >set hint.sc.0.at="isa"
    >set hint.sc.0.flags="0x100"
    >set hint.vt.0.at="isa"
    >set hint.vt.0.disabled="1"
    >set hint.apm.0.disabled="1"
    >set hint.apm.0.flags="0x20"
    >set hint.pcic.0.at="isa"
    >set hint.pcic.0.port="0x3e0"
    >set hint.pcic.0.maddr="0xd0000"
    >set hint.pcic.1.at="isa"
    >set hint.pcic.1.irq="11"
    >set hint.pcic.1.port="0x3e2"
    >set hint.pcic.1.maddr="0xd4000"
    >set hint.pcic.1.disabled="1"
    >set hint.sio.0.at="isa"
    >set hint.sio.0.port="0x3F8"
    >set hint.sio.0.flags="0x10"
    >set hint.sio.0.irq="4"
    >set hint.sio.1.at="isa"
    >set hint.sio.1.port="0x2F8"
    >set hint.sio.1.irq="3"
    >set hint.sio.2.at="isa"
    >set hint.sio.2.disabled="1"
    >set hint.sio.2.port="0x3E8"
    >set hint.sio.2.irq="5"
    >set hint.sio.3.at="isa"
    >set hint.sio.3.disabled="1"
    >set hint.sio.3.port="0x2E8"
    >set hint.sio.3.irq="9"
    >set hint.ppc.0.at="isa"
    >set hint.ppc.0.irq="7"
    >set hint.ed.0.at="isa"
    >set hint.ed.0.disabled="1"
    >set hint.ed.0.port="0x280"
    >set hint.ed.0.irq="10"
    >set hint.ed.0.maddr="0xd8000"
    >set hint.cs.0.at="isa"
    >set hint.cs.0.disabled="1"
    >set hint.cs.0.port="0x300"
    >set hint.sn.0.at="isa"
    >set hint.sn.0.disabled="1"
    >set hint.sn.0.port="0x300"
    >set hint.sn.0.irq="10"
    >set hint.ie.0.at="isa"
    >set hint.ie.0.disabled="1"
    >set hint.ie.0.port="0x300"
    >set hint.ie.0.irq="10"
    >set hint.ie.0.maddr="0xd0000"
    >set hint.fe.0.at="isa"
    >set hint.fe.0.disabled="1"
    >set hint.fe.0.port="0x300"
    >set hint.le.0.at="isa"
    >set hint.le.0.disabled="1"
    >set hint.le.0.port="0x300"
    >set hint.le.0.irq="5"
    >set hint.le.0.maddr="0xd0000"
    >set hint.lnc.0.at="isa"
    >set hint.lnc.0.disabled="1"
    >set hint.lnc.0.port="0x280"
    >set hint.lnc.0.irq="10"
    >set hint.lnc.0.drq="0"
    >load /kernel
    /kernel text=0x23b500 data=0x2f024+0x4bedc /
    >echo \007\007

    >echo Please insert MFS root floppy and press enter:
    Please insert MFS root floppy and press enter:
    >read

    >load -t mfs_root /mfsroot
    >set hint.acpi.0.disabled=1
    >set driver_floppy=YES
    >set module_path="/modules;/dist"
    >echo \007\007

    >autoboot 10
    Hit [Enter] to boot immediately, or any other key for command prompt.
    Booting [/kernel]...
    131072K of memory above 4GB ignored
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.1-CURRENT-20031029-JPSNAP #0: Wed Oct 29 04:30:49 GMT 2003
        root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/BOOTMFS
    Preloaded elf kernel "/kernel" at 0xc0af1000.
    Preloaded mfs_root "/mfsroot" at 0xc0af12c0.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
      
    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Hyperthreading: 2 logical CPUs
    real memory = 4160225280 (3967 MB)
    avail memory = 4043710464 (3856 MB)
    Pentium Pro MTRR support enabled
    md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06b7400
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcibios: BIOS version 2.10
    Using $PIR table, 29 entries at 0xc00fddf0
    pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
    pci0: <PCI bus> on pcib0
    pci_cfgintr: 0:29 INTA BIOS irq 11
    pci_cfgintr: 0:29 INTB BIOS irq 10
    pci_cfgintr: 0:29 INTC BIOS irq 5
    pci0: <unknown> at device 0.1 (no driver attached)
    pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
    attached)
    pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci1
    pci2: <PCI bus> on pcib2
    pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
    attached)
    pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci1
    pci3: <PCI bus> on pcib3
    pci_cfgintr: 3:2 INTA BIOS irq 11
    pci_cfgintr: 3:2 INTB BIOS irq 11
    pci3: <network, ethernet> at device 2.0 (no driver attached)
    pci3: <network, ethernet> at device 2.1 (no driver attached)
    pcib4: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0
    pci4: <PCI bus> on pcib4
    pci4: <base peripheral, interrupt controller> at device 28.0 (no driver
    attached)
    pcib5: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci4
    pci5: <PCI bus> on pcib5
    pci4: <base peripheral, interrupt controller> at device 30.0 (no driver
    attached)
    pcib6: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci4
    pci6: <PCI bus> on pcib6
    pci_cfgintr: 6:1 INTA BIOS irq 12
    asr0: <Adaptec Caching SCSI RAID> mem
    0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 12 at
    device 1.0 on pci6
    asr0: major=154
    asr0: ADAPTEC 2010S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
    uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f
    irq 11 at device 29.0 on pci0
    usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f
    irq 10 at device 29.1 on pci0
    usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f
    irq 5 at device 29.2 on pci0
    usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
    usb2: USB revision 1.0
    uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
    pci7: <PCI bus> on pcib7
    pci_cfgintr: 7:1 INTA BIOS irq 11
    pci7: <display, VGA> at device 1.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH3 UDMA100 controller> port
    0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1
    on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata0: [MPSAFE]
    ata1: at 0x170 irq 15 on atapci0
    ata1: [MPSAFE]
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    orm0: <Option ROMs> at iomem
    0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff
    on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
    0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

    Thanks,
    Stephane.

    >From: Jun Kuriyama <kuriyama@imgsrc.co.jp>
    >To: "Stephane Raimbault" <segr@hotmail.com>
    >CC: <current@freebsd.org>
    >Subject: Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R
    >Date: Sat, 01 Nov 2003 15:41:36 +0900
    >
    >At Fri, 31 Oct 2003 16:56:43 +0000 (UTC),
    >Stephane Raimbault wrote:
    > > Does anyone have any thoughts regarding this? I would like to get 5.1
    >on
    > > this server.
    >
    >How about trying with -v at boot?
    >
    >
    >--
    >Jun Kuriyama <kuriyama@imgsrc.co.jp> // IMG SRC, Inc.
    > <kuriyama@FreeBSD.org> // FreeBSD Project

    _________________________________________________________________
    The new MSN 8: smart spam protection and 2 months FREE*
    http://join.msn.com/?page=features/junkmail
    http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Andreas Klemm: "APM not working on Dell Latitude D600"

    Relevant Pages

    • 6.0 panics on boot
      ... panic, Fatal trap 12, page fault at the NVidea driver in the boot. ... pci0: <ACPI PCI bus> on pcib0 ... fdc0: port ...
      (freebsd-questions)
    • 5.3-BETA1 panic during boot up
      ... Hit to boot immediately, or any other key for command ... pci0: <PCI bus> on pcib0 ... Driver version 1.50.01.002> port ...
      (freebsd-current)
    • FreeBSD 5.3-RELEASE - ata0-master: FAILURE
      ... FreeBSD 5.3-RELEASE default boot method does not boot ... boot to safe mode ... pci0: <PCI bus> on pcib0 ... ppc0: parallel port not found. ...
      (freebsd-questions)
    • Re: PCI Bus filter - can you attach it dynamically?
      ... The boot disk stack cannot be stopped. ... > You have based your assumption that XP is booted from disk connected to controller that is connected on PCI bus. ... inject his filter into a faulty system without requiring a reboot. ...
      (microsoft.public.development.device.drivers)
    • Re: [PATCH] 2.[46] Fix double reset in aic7xxx driver
      ... > Fix occasional PCI bus parity errors on the Dell PowerEdge 4600 during ... > can be made to happen on every boot. ... > the controller causing it to put bad data onto the PCI bus. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)