Re: Xircom pccard couldn't load/attach (with uname -a info)

From: Ronald Klop (ronald-freebsd4_at_klop.yi.org)
Date: 11/30/03

  • Next message: Robert Watson: "Re: user:sys time ratio" 
    To: Scott Mitchell <scott+freebsd@fishballoon.org>
Date: Sun, 30 Nov 2003 16:56:37 +0100

    Hello,

    Here is the output. And the dmesg is attached.
    NEWCARD/OLDCARD??? I think NEWCARD.

    Nov 30 16:51:11 laptop kernel: xe0: <Xircom CreditCard Ethernet 10/100
    + Modem 56> at port 0x2e8-0x2ef irq 11 function 0 config 39 on pccard0
    Nov 30 16:51:12 laptop kernel: xe0: vendor = 0x0105
    Nov 30 16:51:12 laptop kernel: xe0: product = 0x110a
    Nov 30 16:51:12 laptop kernel: xe0: prodext = 0x46
    Nov 30 16:51:12 laptop kernel: xe0: vendor_str = Xircom
    Nov 30 16:51:12 laptop kernel: xe0: product_str = CreditCard Ethernet
    10/100 + Modem 56
    Nov 30 16:51:12 laptop kernel: xe0: cis3_str = CEM56
    Nov 30 16:51:12 laptop kernel: xe0: cis4_str = 1.00
    Nov 30 16:51:12 laptop kernel: xe0: Cannot allocate ioport
    Nov 30 16:51:12 laptop kernel: device_probe_and_attach: xe0 attach
    returned 12

    Greetings,

    Ronald.

    PS: Please reply to ronald_at_cs_dot_vu_dot_nl to prevent spam.

    On Sat, 29 Nov 2003 17:56:11 +0000, Scott Mitchell
    <scott+freebsd@fishballoon.org> wrote:

    > On Sat, Nov 29, 2003 at 02:20:24PM +0100, Ronald Klop wrote:
    >> On Sat, 29 Nov 2003 14:17:01 +0100, Ronald Klop
    >> <ronald-freebsd4@klop.yi.org> wrote:
    >>
    >> >Hello,
    >> >
    >> >This card doesn't attach well. Other Xircom cards do.
    >> >
    >> >Nov 29 13:47:24 laptop kernel: xe0: <Xircom CreditCard Ethernet 10/100
    >> >+ Modem 56> at port 0x2e8-0x2ef irq 11 function 0 config 39 on pccard0
    >> >Nov 29 13:47:24 laptop kernel: device_probe_and_attach: xe0 attach
    >> >returned 12
    >> >
    >> >Mail me if more info is needed.
    >>
    >> uname -a
    >> FreeBSD laptop 5.2-BETA FreeBSD 5.2-BETA #0: Sun Nov 23 22:09:51 CET
    >> 2003 root@henk.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP i386
    >
    > Hi Ronald,
    >
    > Could you try setting sysctl hw.xe.debug=1 and post the output? Also,
    > are
    > you using OLDCARD or NEWCARD? A full dmesg might be useful too...
    > I suspect there's a problem with the driver not knowing all the card IDs
    > that Xircom ever used, as well as probing some cards differently when run
    > under NEWCARD vs. OLDCARD.
    >
    > Cheers,
    >
    > Scott
    > 

    -- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Robert Watson: "Re: user:sys time ratio"

    Relevant Pages