NEC uPD 9210 USB controller not working, Could not map memory

From: Andrew Marks (atm_at_amrx.net)
Date: 12/09/03

  • Next message: Hajimu UMEMOTO: "Re: Missing header file from gcc" 
    Date: Tue, 9 Dec 2003 09:06:11 -0800 (PST)
To: current@freebsd.org

    The NEC uPD 9210 USB controller does not work on my laptop. Its a Fujitsu
    P2120 and I cvsup'd with current about a week ago. The kernel complains at
    boot and cannot "probe and attach" the device. I tried to include what I
    thought was relevant information. Please let me know if there is anything
    else I can do/provide to help solve the problem.

    -Andrew Marks

    Here is the relevant part of dmesg:
    -----------------------------------------------
    ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
    ohci1: Could not map memory
    device_probe_and_attach: ohci1 attach returned 6
    ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
    ohci1: Could not map memory
    device_probe_and_attach: ohci1 attach returned 6

    and of pciconf -vl:
    -------------------------------------------------
    none3@pci0:9:0: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD9210/72010xx USB Open Host Controller'
        class = serial bus
        subclass = USB
    none4@pci0:9:1: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD9210/72010xx USB Open Host Controller'
        class = serial bus
        subclass = USB
    none5@pci0:9:2: class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
        class = serial bus
        subclass = USB

    and here is my kernel config:
    -------------------------------------------------

    makeoptions KERNEL=P2120
    machine i386
    cpu I586_CPU
    ident P2120
    options SCHED_4BSD #4BSD scheduler
    options INET #InterNETworking
    options INET6 #IPv6 communications protocols
    options FFS #Berkeley Fast Filesystem
    options SOFTUPDATES #Enable FFS soft updates support
    options UFS_ACL #Support for access control lists
    options UFS_DIRHASH #Improve performance on big directories
    options MD_ROOT #MD is a potential root device
    options NFSCLIENT #Network Filesystem Client
    options MSDOSFS #MSDOS Filesystem
    options CD9660 #ISO 9660 Filesystem
    options PROCFS #Process filesystem (requires PSEUDOFS)
    options PSEUDOFS #Pseudo-filesystem framework
    options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
    options COMPAT_FREEBSD4 #Compatible with FreeBSD4
    options SCSI_DELAY=1000 #Delay (in ms) before probing SCSI
    options KTRACE #ktrace(1) support
    options SYSVSHM #SYSV-style shared memory
    options SYSVMSG #SYSV-style message queues
    options SYSVSEM #SYSV-style semaphores
    options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
    options KBD_INSTALL_CDEV # install a CDEV entry in /dev
    options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~128k to driver.
    options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~215k to driver.
    device acpi
    device isa
    device pci
    device ata
    device atadisk # ATA disk drives
    device atapicd # ATAPI CDROM drives
    device atapifd # ATAPI floppy drives
    options ATA_STATIC_ID #Static device numbering
    device scbus # SCSI bus (required for SCSI)
    device da # Direct Access (disks)
    device cd # CD
    device pass # Passthrough device (direct SCSI access)
    device atkbdc # AT keyboard controller
    device atkbd # AT keyboard
    device psm # PS/2 mouse
    device vga # VGA video card driver
    device splash # Splash screen and screen saver support
    device sc
    device agp # support several AGP chipsets
    device npx
    device apm
    device pmtimer
    device cbb # cardbus (yenta) bridge
    device pccard # PC Card (16-bit) bus
    device cardbus # CardBus (32-bit) bus
    device sio # 8250, 16[45]50 based serial ports
    device miibus # MII bus support
    device rl # RealTek 8129/8139
    device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
    device wlan # 802.11 support
    device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
    device random # Entropy device
    device loop # Network loopback
    device ether # Ethernet support
    device sl # Kernel SLIP
    device ppp # Kernel PPP
    device tun # Packet tunnel.
    device pty # Pseudo-ttys (telnet etc)
    device md # Memory "disks"
    device bpf # Berkeley packet filter
    device firewire # FireWire bus code
    device sbp # SCSI over FireWire (Requires scbus and da)
    device fwe # Ethernet over FireWire (non-standard!)
    options VESA
    device radeondrm
    options NETSMB #SMB/CIFS requester
    options NETSMBCRYPTO #encrypted passw
    options LIBMCHAIN
    options SMBFS #SMB/CIFS filesystem
    device atapicam # emulate ATAPI devices as SCSI ditto via CAM
    device pcm
    options LIBICONV
    device smbus # Bus support, required for smb below.
    device alpm # this is what the P uses for SMBUS
    device smb
    device ohci
    device usb
    device ugen
    device uhid
    device ukbd
    device umass
    device umct
    device ums
    device ucom
    device uvisor
    options USB_DEBUG
    options IPFIREWALL #firewall
    options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
    options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity

    full dmesg output
    -----------------------------------------------------
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-BETA #1: Mon Dec 1 07:39:01 PST 2003
        root@joshua:/usr/obj/usr/src/sys/P2120
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc0912000.
    Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0912244.
    Preloaded splash_image_data "/boot/modules/splash.bmp" at 0xc09122f4.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (814.39-MHz 586-class CPU)
      Origin = "GenuineTMx86" Id = 0x543
    real memory = 519962624 (495 MB)
    avail memory = 495394816 (472 MB)
    netsmb_dev: loaded
    VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc08118c2 (1000022)
    VESA: ATI MOBILITY RADEON
    acpi0: <FUJ PAULING3> on motherboard
    pcibios: BIOS version 2.10
    Using $PIR table, 9 entries at 0xc00fdf30
    acpi0: Power Button (fixed)
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
    acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pcib0: slot 2 INTA is routed to irq 11
    pcib0: slot 4 INTA is routed to irq 9
    pcib0: slot 12 INTA is routed to irq 9
    pcib0: slot 16 INTA is routed to irq 9
    pcib0: slot 18 INTA is routed to irq 9
    pcib0: slot 19 INTA is routed to irq 9
    pcib0: slot 20 INTA is routed to irq 9
    pci0: <memory, RAM> at device 0.1 (no driver attached)
    pci0: <memory, RAM> at device 0.2 (no driver attached)
    ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe8014000-0xe8014fff irq 11 at device 2.0 on pci0
    usb0: OHCI version 1.0, legacy support
    usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 3 ports with 3 removable, self powered
    pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xe8015000-0xe8015fff irq 9 at device 4.0 on pci0
    pcm0: <Unknown AC97 Codec (id = 0x83847666)>
    alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0
    alpm0: failed to enable port mapping!
    alpm0: Could not allocate Bus space
    device_probe_and_attach: alpm0 attach returned 6
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
    ohci1: Could not map memory
    device_probe_and_attach: ohci1 attach returned 6
    ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
    ohci1: Could not map memory
    device_probe_and_attach: ohci1 attach returned 6
    pci0: <serial bus, USB> at device 9.2 (no driver attached)
    cbb0: <TI1410 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    cbb0: [MPSAFE]
    atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x1800-0x180f at device 15.0 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata0: [MPSAFE]
    ata1: at 0x170 irq 15 on atapci0
    ata1: [MPSAFE]
    rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xe8016800-0xe80168ff irq 9 at device 16.0 on pci0
    rl0: Ethernet address: 00:0b:5d:0d:19:db
    miibus0: <MII bus> on rl0
    rlphy0: <RealTek internal media interface> on miibus0
    rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    wi0: <Intersil Prism2.5> mem 0xe8017000-0xe8017fff irq 9 at device 18.0 on pci0
    wi0: 802.11 address: 00:e0:00:d1:96:c5
    wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
    wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.1)
    wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    fwohci0: vendor=104c, dev=8026
    fwohci0: <1394 Open Host Controller Interface> mem 0xe8010000-0xe8013fff,0xe8016000-0xe80167ff irq 9 at device 19.0 on pci0
    fwohci0: OHCI version 1.10 (ROM=0)
    fwohci0: No. of Isochronous channel is 4.
    fwohci0: EUI64 00:00:0e:10:00:f0:5a:ca
    fwohci0: Phy 1394a available S400, 1 ports.
    fwohci0: Link S400, max_rec 2048 bytes.
    firewire0: <IEEE1394(FireWire) bus> on fwohci0
    fwe0: <Ethernet over FireWire> on firewire0
    if_fwe0: Fake Ethernet address: 02:00:0e:f0:5a:ca
    sbp0: <SBP-2/SCSI over FireWire> on firewire0
    fwohci0: Initiate bus reset
    fwohci0: BUS reset
    fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    firewire0: bus manager 0 (me)
    drm0: <ATI Radeon LY Mobility M6> port 0x1400-0x14ff mem 0xe8000000-0xe800ffff,0xf0000000-0xf7ffffff irq 9 at device 20.0 on pci0
    info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
    acpi_button0: <Power Button> on acpi0
    acpi_acad0: <AC Adapter> on acpi0
    acpi_cmbat0: <Control Method Battery> on acpi0
    acpi_cmbat1: <Control Method Battery> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model Generic PS/2 mouse, device ID 0
    acpi_ec0: <Embedded Controller: GPE 0> port 0x66,0x62 on acpi0
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0: configured irq 4 not in bitmap of probed irqs 0
    sio0: port may not be enabled
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 8250 or not responding
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 814387882 Hz quality 800
    Timecounters tick every 10.000 msec
    ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
    acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
    system power profile changed to 'economy'
    GEOM: create disk ad0 dp=0xc472da60
    ad0: 38154MB <TOSHIBA MK4021GAS> [77520/16/63] at ata0-master UDMA66
    Mounting root from ufs:/dev/ad0s1a

    full pciconf -vl output
    -----------------------------------------------------------------
    hostb0@pci0:0:0: class=0x060000 card=0x110e10cf chip=0x03951279 rev=0x03 hdr=0x00
        vendor = 'Transmeta Corp.'
        device = 'LongRun Northbridge'
        class = bridge
        subclass = HOST-PCI
    none0@pci0:0:1: class=0x050000 card=0x110e10cf chip=0x03961279 rev=0x00 hdr=0x00
        vendor = 'Transmeta Corp.'
        device = 'SDRAM Controller'
        class = memory
        subclass = RAM
    none1@pci0:0:2: class=0x050000 card=0x110e10cf chip=0x03971279 rev=0x00 hdr=0x00
        vendor = 'Transmeta Corp.'
        device = 'BIOS scratchpad'
        class = memory
        subclass = RAM
    ohci0@pci0:2:0: class=0x0c0310 card=0x10a210cf chip=0x523710b9 rev=0x03 hdr=0x00
        vendor = 'Acer Labs Incorporated (ALi)'
        device = 'ALI M5237 OpenHCI USB Controller'
        class = serial bus
        subclass = USB
    pcm0@pci0:4:0: class=0x040100 card=0x117710cf chip=0x545110b9 rev=0x01 hdr=0x00
        vendor = 'Acer Labs Incorporated (ALi)'
        device = 'ALI M5451 PCI AC-Link Controller Audio Device'
        class = multimedia
        subclass = audio
    none2@pci0:6:0: class=0x068000 card=0x10a310cf chip=0x710110b9 rev=0x00 hdr=0x00
        vendor = 'Acer Labs Incorporated (ALi)'
        device = 'ALI M7101 Power Management Controller'
        class = bridge
        subclass = PCI-unknown
    isab0@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00
        vendor = 'Acer Labs Incorporated (ALi)'
        device = 'ALI M1533 Aladdin IV ISA Bridge'
        class = bridge
        subclass = PCI-ISA
    none3@pci0:9:0: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD9210/72010xx USB Open Host Controller'
        class = serial bus
        subclass = USB
    none4@pci0:9:1: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD9210/72010xx USB Open Host Controller'
        class = serial bus
        subclass = USB
    none5@pci0:9:2: class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
        vendor = 'NEC Electronics Hong Kong'
        device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
        class = serial bus
        subclass = USB
    cbb0@pci0:12:0: class=0x060700 card=0x10c610cf chip=0xac50104c rev=0x01 hdr=0x02
        vendor = 'Texas Instruments (TI)'
        device = 'PCI1410 PC card cardBus Controller'
        class = bridge
        subclass = PCI-CardBus
    atapci0@pci0:15:0: class=0x0101fa card=0x10a410cf chip=0x522910b9 rev=0xc3 hdr=0x00
        vendor = 'Acer Labs Incorporated (ALi)'
        device = 'M1543 Southbridge EIDE Controller'
        class = mass storage
        subclass = ATA
    rl0@pci0:16:0: class=0x020000 card=0x111c10cf chip=0x813910ec rev=0x10 hdr=0x00
        vendor = 'Realtek Semiconductor'
        device = 'RT8139 (A/B/C/813x/C+) Fast Ethernet Adapter'
        class = network
        subclass = ethernet
    wi0@pci0:18:0: class=0x028000 card=0x116910cf chip=0x38731260 rev=0x01 hdr=0x00
        vendor = 'Intersil Americas Inc (Was: Harris Semiconductor)'
        device = 'PRISM 2.5 802.11b 11Mbps Wireless Controller'
        class = network
    fwohci0@pci0:19:0: class=0x0c0010 card=0x116210cf chip=0x8026104c rev=0x00 hdr=0x00
        vendor = 'Texas Instruments (TI)'
        device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller'
        class = serial bus
        subclass = FireWire
    drm0@pci0:20:0: class=0x030000 card=0x11c810cf chip=0x4c591002 rev=0x00 hdr=0x00
        vendor = 'ATI Technologies'
        device = 'Mobility 6 Radeon Mobility M6 LY'
        class = display
        subclass = VGA
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Hajimu UMEMOTO: "Re: Missing header file from gcc"