"no driver attached" for Realtek 8129-based NIC

From: David Wolfskill (david_at_catwhisker.org)
Date: 12/26/03

  • Next message: David Wolfskill: "Re: "no driver attached" for Realtek 8129-based NIC"
    Date: Fri, 26 Dec 2003 12:45:14 -0800 (PST)
    To: current@freebsd.org
    
    

    I'm still struggling with trying to figure out why the Realtek 8129-
    based NIC on my (SMP) mini-tower (which runs headless) isn't getting a
    driver attached.

    Despite that, I'm still tracking -CURRENT with it daily, because it also
    runs -STABLE (where rl0 Just Works, as it did in -CURRENT prior to 10
    September).

    In an effort to try to understand enough of what is going on to try to
    debug the problem, I thought it might be useful to examine the PCI probe
    logic. And in sys/dev/pci/pci.c, I found pci_describe_device(), which
    appears to have several places where it silently bails (via "goto out"
    if a certain predicate is satisfied). Thus, it occurred to me that
    making these a bit noisier might shed some light on the situation.
    These lines may be seen in the below boot messages by noting the string
    "pci_describe_device(): " at the beginning of each one.

    The code base is updated as of about 0347 hrs. today (26 Dec 2003),
    US/Pacifci (8 hrs. west of GMT/UTC), which the above-described printf()
    invocations added. (The second time around -- which is what generated
    the below output -- I even remembered to wrap the printf() calls and the
    "goto out" within a set of braces. :-})

    First, here's a recent (from 24 Dec) output of "pciconf -l -v". Please
    note that the Reltek 8129-based device appears (in this output) to be
    recognized):

    freebeast(5.2-C)[1] sudo pciconf -l -v
    Password:
    hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x30911106 rev=0x01 hdr=0x00
        vendor = 'VIA Technologies Inc'
        device = 'VT8633 Apollo Pro 266 CPU to PCI Bridge'
        class = bridge
        subclass = HOST-PCI
    pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00 hdr=0x01
        vendor = 'VIA Technologies Inc'
        device = 'VT8633 Apollo Pro 266 CPU to AGP Controller'
        class = bridge
        subclass = PCI-PCI
    none0@pci0:9:0: class=0x020000 card=0x00d810ec chip=0x812910ec rev=0x00 hdr=0x00
        vendor = 'Realtek Semiconductor'
        device = 'RTL8129 10/100 Fast Ethernet Controller'
        class = network
        subclass = ethernet
    none1@pci0:10:0: class=0x030000 card=0x0100086c chip=0x31431106 rev=0x06 hdr=0x00
        vendor = 'VIA Technologies Inc'
        class = display
        subclass = VGA
    pcm0@pci0:14:0: class=0x040100 card=0x011113f6 chip=0x011113f6 rev=0x10 hdr=0x00
        vendor = 'C-Media Electronics Inc.'
        device = 'CMI8738/PCI C3DX PCI Audio Chip'
        class = multimedia
        subclass = audio
    atapci0@pci0:15:0: class=0x010400 card=0x0649101e chip=0x06491095 rev=0x02 hdr=0x00
        vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
        device = 'PCI-649 Ultra ATA/100 PCI to IDE/ATA Controller'
        class = mass storage
        subclass = RAID
    isab0@pci0:17:0: class=0x060100 card=0x00001106 chip=0x30741106 rev=0x00 hdr=0x00
        vendor = 'VIA Technologies Inc'
        device = 'VT8233 PCI to ISA Bridge'
        class = bridge
        subclass = PCI-ISA
    atapci1@pci0:17:1: class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06 hdr=0x00
        vendor = 'VIA Technologies Inc'
        device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
        class = mass storage
        subclass = ATA
    none2@pci1:0:0: class=0x030000 card=0x8a135333 chip=0x8a135333 rev=0x02 hdr=0x00
        vendor = 'S3 Incorporated'
        device = '86C360 Trio3D1X, 86C362 Trio3D2X, 86C368 Trio3D2X+8MB'
        class = display
        subclass = VGA
    freebeast(5.2-C)[2] ifconfig
    plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
            inet 127.0.0.1 netmask 0xff000000
            inet6 ::1 prefixlen 128
            inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
    freebeast(5.2-C)[3]

    Here is the console output from "boot -v" (as described above):

    Booting [/boot/kernel/kernel]...
    /boot/kernel/acpi.ko text=0x3ec34 data=0x1784+0x114c syms=[0x4+0x6240+0x4+0x807c]
    SMAP type=01 base=0000000000000000 len=000000000009fc00
    SMAP type=01 base=000000000009fc00 len=0000000000000400
    SMAP type=02 base=00000000000f0000 len=0000000000010000
    SMAP type=02 base=00000000fec00000 len=0000000001400000
    SMAP type=01 base=0000000000100000 len=000000001fef0000
    SMAP type=03 base=000000001fff3000 len=000000000000d000
    SMAP type=04 base=000000001fff0000 len=0000000000003000
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-CURRENT #44: Fri Dec 26 20:12:48 PST 2003
        root@freebeast.catwhisker.org:/common/S4/obj/usr/src/sys/FREEBEAST
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc085d000.
    Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc085d1f4.
    Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc085d2a0.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc085d34c.
    Table 'FACP' at 0x1fff3040
    Table 'APIC' at 0x1fff6280
    MADT: Found table at 0x1fff6280
    MP Configuration Table version 1.4 found at 0xc00f1400
    APIC: Using the MADT enumerator.
    MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
    SMP: Added CPU 0 (AP)
    MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
    SMP: Added CPU 1 (AP)
    ACPI APIC Table: <VIA694 AWRDACPI>
    Calibrating clock(s) ... i8254 clock: 1193294 Hz
    CLK_USE_I8254_CALIBRATION not specified - using default frequency
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Calibrating TSC clock ... TSC clock: 876398356 Hz
    CPU: Intel Pentium III (876.40-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x68a Stepping = 10
      Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    real memory = 536805376 (511 MB)
    Physical memory chunk(s):
    0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
    0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
    0x0000000000c29000 - 0x000000001f6c7fff, 514453504 bytes (125599 pages)
    avail memory = 515678208 (491 MB)
    APIC ID: physical 0, logical 0:0
    APIC ID: physical 1, logical 0:1
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
     cpu0 (BSP): APIC ID: 0
     cpu1 (AP): APIC ID: 1
    bios32: Found BIOS32 Service Directory header at 0xc00faf20
    bios32: Entry = 0xfb390 (c00fb390) Rev = 0 Len = 1
    pcibios: PCI BIOS entry at 0xf0000+0xb3c0
    pnpbios: Found PnP BIOS data at 0xc00fbde0
    pnpbios: Entry = f0000:be10 Rev = 1.0
    Other BIOS signatures found:
    APIC: CPU 0 has ACPI ID 0
    APIC: CPU 1 has ACPI ID 1
    MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
    ioapic0: intpin 0 -> ExtINT (edge, activehi)
    ioapic0: intpin 1 -> irq 1 (edge, activehi)
    ioapic0: intpin 2 -> irq 2 (edge, activehi)
    ioapic0: intpin 3 -> irq 3 (edge, activehi)
    ioapic0: intpin 4 -> irq 4 (edge, activehi)
    ioapic0: intpin 5 -> irq 5 (edge, activehi)
    ioapic0: intpin 6 -> irq 6 (edge, activehi)
    ioapic0: intpin 7 -> irq 7 (edge, activehi)
    ioapic0: intpin 8 -> irq 8 (edge, activehi)
    ioapic0: intpin 9 -> irq 9 (edge, activehi)
    ioapic0: intpin 10 -> irq 10 (edge, activehi)
    ioapic0: intpin 11 -> irq 11 (edge, activehi)
    ioapic0: intpin 12 -> irq 12 (edge, activehi)
    ioapic0: intpin 13 -> irq 13 (edge, activehi)
    ioapic0: intpin 14 -> irq 14 (edge, activehi)
    ioapic0: intpin 15 -> irq 15 (edge, activehi)
    ioapic0: intpin 16 -> irq 16 (level, activelo)
    ioapic0: intpin 17 -> irq 17 (level, activelo)
    ioapic0: intpin 18 -> irq 18 (level, activelo)
    ioapic0: intpin 19 -> irq 19 (level, activelo)
    ioapic0: intpin 20 -> irq 20 (level, activelo)
    ioapic0: intpin 21 -> irq 21 (level, activelo)
    ioapic0: intpin 22 -> irq 22 (level, activelo)
    ioapic0: intpin 23 -> irq 23 (level, activelo)
    MADT: intr override: source 0, irq 2
    ioapic0: Routing IRQ 0 -> intpin 2
    ioapic0: intpin 2 trigger: edge
    ioapic0: intpin 2 polarity: active-hi
    MADT: intr override: source 9, irq 9
    ioapic0: intpin 9 trigger: edge
    ioapic0: intpin 9 polarity: active-hi
    ioapic0 <Version 1.1> irqs 0-23 on motherboard
    cpu0 BSP:
         ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
      lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
    wlan: <802.11 Link Layer>
    null: <null device, zero device>
    random: <entropy source>
    mem: <memory & I/O>
    Pentium Pro MTRR support enabled
    npx0: [FAST]
    stray irq13
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <VIA694 AWRDACPI> on motherboard
    pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
    pci_open(1a): mode1res=0x80000000 (0x80000000)
    pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30911106)
    pcibios: BIOS version 2.10
    Using $PIR table, 8 entries at 0xc00fde30
    PCI-Only Interrupts: 5 10 11 12
    Location Bus Device Pin Link IRQs
    slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
    slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
    slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
    slot 1 0 9 D 0x04 3 4 5 7 9 10 11 12 14 15
    slot 2 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15
    slot 2 0 10 B 0x03 3 4 5 7 9 10 11 12 14 15
    slot 2 0 10 C 0x04 3 4 5 7 9 10 11 12 14 15
    slot 2 0 10 D 0x01 3 4 5 7 9 10 11 12 14 15
    slot 3 0 11 A 0x03 3 4 5 7 9 10 11 12 14 15
    slot 3 0 11 B 0x04 3 4 5 7 9 10 11 12 14 15
    slot 3 0 11 C 0x01 3 4 5 7 9 10 11 12 14 15
    slot 3 0 11 D 0x02 3 4 5 7 9 10 11 12 14 15
    slot 4 0 12 A 0x04 3 4 5 7 9 10 11 12 14 15
    slot 4 0 12 B 0x01 3 4 5 7 9 10 11 12 14 15
    slot 4 0 12 C 0x02 3 4 5 7 9 10 11 12 14 15
    slot 4 0 12 D 0x03 3 4 5 7 9 10 11 12 14 15
    slot 5 0 13 A 0x01 3 4 5 7 9 10 11 12 14 15
    slot 5 0 13 B 0x02 3 4 5 7 9 10 11 12 14 15
    slot 5 0 13 C 0x03 3 4 5 7 9 10 11 12 14 15
    slot 5 0 13 D 0x04 3 4 5 7 9 10 11 12 14 15
    slot 6 0 14 A 0x02 3 4 5 7 9 10 11 12 14 15
    slot 6 0 14 B 0x03 3 4 5 7 9 10 11 12 14 15
    slot 6 0 14 C 0x04 3 4 5 7 9 10 11 12 14 15
    slot 6 0 14 D 0x01 3 4 5 7 9 10 11 12 14 15
    slot 7 0 15 A 0x03 3 4 5 7 9 10 11 12 14 15
    slot 7 0 15 B 0x04 3 4 5 7 9 10 11 12 14 15
    slot 7 0 15 C 0x01 3 4 5 7 9 10 11 12 14 15
    slot 7 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
    embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
    embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
    embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
    embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15
    acpi_bus_number: root bus has no _BBN, assuming 0
    AcpiOsDerivePciId: bus 0 dev 17 func 0
    acpi0: Power Button (fixed)
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    ACPI timer looks GOOD min = 2, max = 3, width = 1
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
    acpi_cpu0: <CPU> on acpi0
    acpi_cpu1: <CPU> on acpi0
    acpi_tz0: <Thermal Zone> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
    pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 - AE_BAD_DATA
    ---- initial configuration ------------------------
    ---- before setting priority for links ------------
    ---- before fixup boot-disabled links -------------
    ---- after fixup boot-disabled links --------------
    ---- arbitrated configuration ---------------------
    pci0: <ACPI PCI bus> on pcib0
    pci0: physical bus=0
            map[10]: type 3, range 32, base da000000, size 22, enabled
    found-> vendor=0x1106, dev=0x3091, revid=0x01
            bus=0, slot=0, func=0
            class=06-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
            lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2 supports D0 D3 current D0
    found-> vendor=0x1106, dev=0xb091, revid=0x00
            bus=0, slot=1, func=0
            class=06-04-00, hdrtype=0x01, mfdev=0
            cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
            map[10]: type 4, range 32, base 0000c000, size 7, enabled
            map[14]: type 1, range 32, base da401000, size 7, enabled
    pcib0: matched entry for 0.9.INTA (source )
    pcib0: device is hardwired to IRQ 16
    found-> vendor=0x10ec, dev=0x8129, revid=0x00
            bus=0, slot=9, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
            intpin=a, irq=16
            map[10]: type 4, range 32, base 0100c400, size 7, enabled
            map[14]: type 1, range 32, base d9000000, size 7, enabled
            map[18]: type 1, range 32, base 01000000, size 24, enabled
            map[1c]: type 1, range 32, base 01000000, size 24, enabled
            map[20]: type 1, range 32, base 01000000, size 24, enabled
            map[24]: type 1, range 32, base 01000000, size 24, enabled
    pcib0: matched entry for 0.10.INTA (source )
    pcib0: device is hardwired to IRQ 17
    found-> vendor=0x1106, dev=0x3143, revid=0x06
            bus=0, slot=10, func=0
            class=03-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0300, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x76 (29500 ns), maxlat=0x99 (38250 ns)
            intpin=a, irq=17
            map[10]: type 4, range 32, base 0000c800, size 8, enabled
    pcib0: matched entry for 0.14.INTA (source )
    pcib0: device is hardwired to IRQ 17
    found-> vendor=0x13f6, dev=0x0111, revid=0x10
            bus=0, slot=14, func=0
            class=04-01-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
            intpin=a, irq=17
            powerspec 2 supports D0 D1 D2 D3 current D0
            map[10]: type 4, range 32, base 0000cc00, size 3, enabled
            map[14]: type 4, range 32, base 0000d000, size 2, enabled
            map[18]: type 4, range 32, base 0000d400, size 3, enabled
            map[1c]: type 4, range 32, base 0000d800, size 2, enabled
            map[20]: type 4, range 32, base 0000dc00, size 4, enabled
    pcib0: matched entry for 0.15.INTA (source )
    pcib0: device is hardwired to IRQ 18
    found-> vendor=0x1095, dev=0x0649, revid=0x02
            bus=0, slot=15, func=0
            class=01-04-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
            intpin=a, irq=18
            powerspec 2 supports D0 D1 D2 D3 current D0
    found-> vendor=0x1106, dev=0x3074, revid=0x00
            bus=0, slot=17, func=0
            class=06-01-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2 supports D0 D3 current D0
            map[20]: type 4, range 32, base 0000e000, size 4, enabled
    found-> vendor=0x1106, dev=0x0571, revid=0x06
            bus=0, slot=17, func=1
            class=01-01-8a, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2 supports D0 D3 current D0
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pcib1: secondary bus 1
    pcib1: subordinate bus 1
    pcib1: I/O decode 0xf000-0xfff
    pcib1: memory decode 0xd0000000-0xd7ffffff
    pcib1: prefetched decode 0xfff00000-0xfffff
    pci1: <PCI bus> on pcib1
    pci1: physical bus=1
            map[10]: type 1, range 32, base d0000000, size 26, enabled
    found-> vendor=0x5333, dev=0x8a13, revid=0x02
            bus=1, slot=0, func=0
            class=03-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
            powerspec 1 supports D0 D3 current D0
    pci_describe_device(): no vendor data for c0c21a3c
    pci1: <display, VGA> at device 0.0 (no driver attached)
    pci_describe_device(): no vendor data for c0c21af4
    pci0: <network, ethernet> at device 9.0 (no driver attached)
    pci_describe_device(): no vendor data for c0c21af4
    pci0: <display, VGA> at device 10.0 (no driver attached)
    pcm0: <CMedia CMI8738> port 0xc800-0xc8ff irq 17 at device 14.0 on pci0
    pcm0: sndbuf_setmap 265000, 4000; 0xd86ba000 -> 265000
    pcm0: sndbuf_setmap 279000, 4000; 0xd86be000 -> 279000
    atapci0: <CMD 649 UDMA100 controller> port 0xdc00-0xdc0f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07 irq 18 at device 15.0 on pci0
    atapci0: [MPSAFE]
    ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata2: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0
    ata2: at 0xcc00 on atapci0
    ata2: [MPSAFE]
    ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
    ata3: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0
    ata3: at 0xd400 on atapci0
    ata3: [MPSAFE]
    isab0: <PCI-ISA bridge> at device 17.0 on pci0
    isa0: <ISA bus> on isab0
    atapci1: <VIA 8233 UDMA100 controller> port 0xe000-0xe00f at device 17.1 on pci0
    ata0: reset tp1 mask=03 ostat0=50 ostat1=00
    ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
    ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
    ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
    ata0: at 0x1f0 irq 14 on atapci1
    ata0: [MPSAFE]
    ata1: reset tp1 mask=03 ostat0=50 ostat1=01
    ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
    ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
    ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
    ata1: at 0x170 irq 15 on atapci1
    ata1: [MPSAFE]
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    sio0: irq maps: 0x6041 0x6051 0x6041 0x6041
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A, console
    sio1: irq maps: 0x6041 0x6049 0x6041 0x6041
    sio1 port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    unknown: not probed (disabled)
    ppc0: using extended I/O port range
    ppc0: SPP
    ppc0 port 0xf78-0xf7b,0xb78-0xb7b,0x778-0x77b,0x378-0x37f irq 7 on acpi0
    ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    plip0: bpf attached
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    unknown: not probed (disabled)
    ata: ata0 already exists; skipping it
    ata: ata1 already exists; skipping it
    fdc: fdc0 already exists; skipping it
    ppc: ppc0 already exists; skipping it
    sio: sio0 already exists; skipping it
    sio: sio1 already exists; skipping it
    Trying Read_Port at 203
    Trying Read_Port at 243
    Trying Read_Port at 283
    Trying Read_Port at 2c3
    Trying Read_Port at 303
    Trying Read_Port at 343
    Trying Read_Port at 383
    Trying Read_Port at 3c3
    sc: sc0 already exists; skipping it
    vga: vga0 already exists; skipping it
    isa_probe_children: disabling PnP devices
    isa_probe_children: probing non-PnP devices
    orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
    adv0 failed to probe on isa0
    aha0 failed to probe on isa0
    aic0 failed to probe on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    kbdc: DIAGNOSE status:0055
    kbdc: TEST_KBD_PORT status:0000
    kbdc: DIAGNOSE status:0055
    kbdc: TEST_KBD_PORT status:0000
    psm0: current command byte:0067
    kbdc: TEST_AUX_PORT status:0000
    kbdc: RESET_AUX return code:00fe
    kbdc: RESET_AUX return code:00fe
    kbdc: RESET_AUX return code:00fe
    kbdc: DIAGNOSE status:0055
    kbdc: TEST_KBD_PORT status:0000
    psm0: failed to reset the aux device.
    bt0 failed to probe on isa0
    cs0 failed to probe at port 0x300 on isa0
    ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
    fe0 failed to probe at port 0x300 on isa0
    ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
    le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
    lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
    pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
    pcic1: not probed (disabled)
    pmtimer0 on isa0
    kbdc: DIAGNOSE status:0055
    kbdc: TEST_KBD_PORT status:0000
    kbdc: DIAGNOSE status:0055
    kbdc: TEST_KBD_PORT status:0000
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sc0: fb0, terminal emulator: sc (syscons terminal)
    sio2: not probed (disabled)
    sio3: not probed (disabled)
    sn0 failed to probe at port 0x300 irq 10 on isa0
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    fb0: vga0, vga, type:VGA (5), flags:0x7007f
    fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
    fb0: init mode:24, bios mode:3, current mode:24
    fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
    VGA parameters upon power-up
    50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
    bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
    b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    VGA parameters in BIOS for mode 24
    50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
    bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
    b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    EGA/VGA parameters to be used for mode 24
    50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
    bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
    b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
    3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
    vt0 failed to probe on isa0
    isa_probe_children: probing PnP devices
    Device configuration finished.
    procfs registered
    Timecounter "TSC" frequency 876398356 Hz quality -100
    Timecounters tick every 10.000 msec
    lo0: bpf attached
    ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
    ata0-master: setting PIO4 on VIA 8233 chip
    ata0-master: setting UDMA100 on VIA 8233 chip
    GEOM: create disk ad0 dp=0xc44c9760
    ad0: <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA-5 disk at ata0-master
    ad0: 39203MB (80288480 sectors), 79651 C, 16 H, 63 S, 512 B
    ad0: 16 secs/int, 1 depth queue, UDMA100
    GEOM: new disk ad0
    ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
    ata1-master: setting PIO4 on VIA 8233 chip
    [0] f:00 typ:165 s(CHS):0/1/1 e(CHS):260/254/63 s:63 l:4192902
    [1] f:00 typ:165 s(CHS):261/0/1 e(CHS):521/254/63 s:4192965 l:4192965
    [2] f:00 typ:165 s(CHS):522/0/1 e(CHS):782/254/63 s:8385930 l:4192965
    [3] f:80 typ:165 s(CHS):783/0/1 e(CHS):1023/254/63 s:12578895 l:67697910
    GEOM: Configure ad0s1, start 32256 length 2146765824 end 2146798079
    GEOM: Configure ad0s2, start 2146798080 length 2146798080 end 4293596159
    GEOM: Configure ad0s3, start 4293596160 length 2146798080 end 6440394239
    GEOM: Configure ad0s4, start 6440394240 length 34661329920 end 41101724159
    GEOM: Configure ad0s1a, start 0 length 167772160 end 167772159
    GEOM: Configure ad0s1c, start 0 length 2146765824 end 2146765823
    GEOM: Configure ad0s1e, start 167772160 length 1978993664 end 2146765823
    acd0: <Compaq CRD-8322B/1.06> CDROM drive at ata1 as master
    acd0: read 5500KB/s (5500KB/s), 128KB buffer, PIO4
    acd0: Reads: CDR, CDRW, CDDA stream, packet
    acd0: Writes:
    acd0: Audio: play, 255 volume levels
    acd0: Mechanism: ejectable tray, unlocked, lock protected
    acd0: Medium: no/blank disc
    SMP: AP CPU #1 Launched!
    cpu1 AP:
         ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
      lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
    eoapic0: routiGnEgO Mi:n tCpoinnf i3g u(rIeR Qa d30)s 2tao, csltuasrtte r0 0l
    Rigotahp i1c607:7 7r2o1u6t0i negn di n1t6p7i7n7 241 5(9I
    dG E4O)M :t oC ocnlfuisgtuerre 0a
    0iso2acp,i cs0t:a rrto u0t ilnegn gitnht p2i1n4 667 9(8I0R8Q0 6e)n dt o2 1c4l6u7s9t8e0r7 90

    ioapic0: rGoEuOtMi:n gC oinnftipgiunr e7 a(dI0RsQ2 e7,) sttoa rctl u1s6t7e7r7 601
    ti olaepnigct0h: 1r9o7u9t0i2n5g9 2i0n tepnidn 281 4(6I7R9Q8 087)9
    o cluster 0
    ioapic0: routing intpin 9 (IRQ 9) to cluster 0
    ioapic0: routing intpin 13 (IRQ 13) to cluster 0
    ioapic0: routing intpin 14 (IRQ 14) to cluster 0
    ioapic0: routing intpin 15 (IRQ 15) to cluster 0
    ioapic0: routing intpin 17 (IRQ 17) to cluster 0
    ioapic0: routing intpin 18 (IRQ 18) to cluster 0
    GEOM: Configure ad0s3a, start 0 length 167772160 end 167772159
    GEOM: Configure ad0s3c, start 0 length 2146798080 end 2146798079
    GEOM: Configure ad0s3e, start 167772160 length 1979025920 end 2146798079
    GEOM: Configure ad0s4a, start 0 length 167772160 end 167772159
    GEOM: Configure ad0s4b, start 167772160 length 1073741824 end 1241513983
    GEOM: Configure ad0s4c, start 0 length 34661329920 end 34661329919
    GEOM: Configure ad0s4e, start 1241513984 length 1978662912 end 3220176895
    GEOM: Configure ad0s4g, start 3220176896 length 2147483648 end 5367660543
    GEOM: Configure ad0s4h, start 5367660544 length 29293669376 end 34661329919
    Mounting root from ufs:/dev/ad0s4a
    start_init: trying /sbin/init
    Loading configuration files.
    Entropy harvesting: interrupts ethernet point_to_point.
    swapon: adding /dev/ad0s4b as swap device
    Starting file system checks:
    /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s1a: clean, 110384 free (1184 frags, 13650 blocks, 0.7% fragmentation)
    /dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s1e: clean, 1128055 free (29175 frags, 137360 blocks, 1.6% fragmentation)
    /dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s2a: clean, 109906 free (314 frags, 13699 blocks, 0.2% fragmentation)
    /dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s2e: clean, 1057914 free (8218 frags, 131212 blocks, 0.4% fragmentation)
    /dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s3a: clean, 87265 free (1057 frags, 10776 blocks, 0.7% fragmentation)
    /dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s3e: clean, 991477 free (15525 frags, 121994 blocks, 0.8% fragmentation)
    /dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s4a: clean, 70295 free (999 frags, 8662 blocks, 0.6% fragmentation)
    /dev/ad0s4e: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s4e: clean, 991098 free (20010 frags, 121386 blocks, 1.1% fragmentation)
    /dev/ad0s4h: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s4h: clean, 11769675 free (242771 frags, 1440863 blocks, 0.9% fragmentation)
    /dev/ad0s4g: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s4g: clean, 1538012 free (796 frags, 192152 blocks, 0.0% fragmentation)
    Setting hostname: freebeast.catwhisker.org.
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
            inet 127.0.0.1 netmask 0xff000000
            inet6 ::1 prefixlen 128
            inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
    route: writing to routing socket: Network is unreachable
    add net default: gateway 172.16.8.1: Network is unreachable
    Additional routing options:.
    hw.bus.devctl_disable: 0 -> 1
    Mounting NFS file systems:.
    Starting syslogd.
    Dec 26 20:18:16 freebeast syslogd: kernel boot file is /boot/kernel/kernel
    Starting ntpdate.
    Generating host.conf.
    NFS access cache time=2
    ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
    a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
    Starting rpcbind.
    Starting mountd.
    Dec 26 20:18:21 freebeast mountd[417]: -alldirs requested but /S1/usr is not a filesystem mountpoint
    Dec 26 20:18:21 freebeast mountd[417]: bad exports list line /S1/usr -ro -alldirs
    Dec 26 20:18:21 freebeast mountd[417]: bad exports list line /S2/usr
    Dec 26 20:18:21 freebeast mountd[417]: bad exports list line /S3/usr
    Dec 26 20:18:21 freebeast mountd[417]: bad exports list line /S4/usr
    Dec 26 20:18:21 freebeast mountd[417]: -alldirs requested but /cdrom is not a filesystem mountpoint
    Dec 26 20:18:21 freebeast mountd[417]: bad exports list line /cdrom -ro -alldirs
    Starting nfsd.
    Starting local daemons:.
    Updating motd.
    Starting ntpd.
    Configuring syscons: blanktime.
    Starting sshd.
    Initial i386 initialization:.
    Additional ABI support:.
    Starting cron.
    Local package initialization:ldconfig: /usr/local/lib/mysql: ignoring group-writable directory
    [Fri Dec 26 20:18:23 2003] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
     cvsupd
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  • Next message: David Wolfskill: "Re: "no driver attached" for Realtek 8129-based NIC"

    Relevant Pages