5.2R CD hangs during boot at sym0 device

From: C. Kukulies (kuku_at_www.kukulies.org)
Date: 12/30/03

  • Next message: Randy Bush: "Re: 4.9-stable to 5.x" 
    Date: Tue, 30 Dec 2003 13:51:02 +0100 (CET)
To: freebsd-current@freebsd.org

    I created a 5.2 boot CD from disc1.iso image.
    When I boot that CD the system gets hung at the sym0 device:

    sym0: suspicious SCSI data while resetting the bus
    sym0: dp0,d7/0, rst,req, ack i/o=0x3ffff, expecting 0x100

    After a couple of seconds that last message repeats about 10 times and
    then nothing. Reset button required.

    The card is a PCI card with a NCR 53C810 chip on it.
    No drives are attached to it and the SIP1,2 and 3 sockets were not
    populated with terminating resistors, FWIW.

    I wanted to use that card as an interface to a Mustek scanner
    since I have no ISA slot anymore in that MB (an ASUS P4P8X)
    After taking out the card I could continue with installation. 

    --
Chris Christoph P. U. Kukulies kuku_at_physik.rwth-aachen.de
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
  • Next message: Randy Bush: "Re: 4.9-stable to 5.x"