dmesg oddities - clues sought

• Previous message: Randy Bush: "Re: More info: ATA hang on resume (fwd)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Wed, 31 Dec 2003 07:45:58 -0800
To: FreeBSD Current <freebsd-current@freebsd.org>

thinkpad t40p
system as of 30th
kernel source as of a few mins ago

could someone explain to me some strange (to me) messages in boot?
marked with "<<<<< *****************"

thanks

randy

---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Wed Dec 31 06:50:57 PST 2003
    root@roam.psg.com:/usr/obj/usr/src/sys/ROAM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0798000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0798244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07982f0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1600MHz (1594.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 1073086464 (1023 MB)
avail memory = 1044770816 (996 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 15 entries at 0xc00fdea0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:29 INTA BIOS irq 11                       <<<<< ****************
pci_cfgintr: 0:29 INTB BIOS irq 11
pci_cfgintr: 0:29 INTC BIOS irq 11
pci_cfgintr: 0:29 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Actiontec Electronics product 0x0441, rev 1.10/5.46, addr 2
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci_cfgintr: 2:0 INTA BIOS irq 11                        <<<<< ****************
pci_cfgintr: 2:0 INTB BIOS irq 11
pci_cfgintr: 2:1 INTA BIOS irq 11
pci_cfgintr: 2:2 INTA BIOS irq 11
cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
start (b0000000) < sc->membase (c0200000)
start (b0000000) < sc->pmembase (e8000000)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
start (b1000000) < sc->membase (c0200000)
start (b1000000) < sc->pmembase (e8000000)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff irq 11 at device 1.0 on pci2
em0:  Speed:N/A  Duplex:N/A
ath0: <Atheros 5211> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2
ath0: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 802.11 address: 00:05:4e:41:ee:cd
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0: cannot reserve I/O port range                      <<<<< ****************
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)         <<<<< ****************
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <IBM0057> can't assign resources (irq)
unknown: <IBM0071> can't assign resources (port)
ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
GEOM: create disk ad0 dp=0xc5e23d60
ad0: 54164MB <HTS726060M9AT00> [110048/16/63] at ata0-master UDMA100
acd0: CDRW <UJDA745 DVD/CDRW> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s3a
link_elf: symbol cdevsw_add undefined                    <<<<< ****************
link_elf: symbol linux_ioctl_register_handler undefined  <<<<< ****************
-30-
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

• Previous message: Randy Bush: "Re: More info: ATA hang on resume (fwd)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Relevant Pages 5.3: ed1: Ethernet address: aa:aa:aa:aa:aa:aa ... cardbus0: on cbb0 ... <Parallel port bus> on ppc0 ... unknown: can't assign resources ... (freebsd-stable) 0.0% user, 0.0% nice, 0.0% system, 53.8% interrupt, 46.2% idle - Unusual interrupt use? ... unknown: can't assign resources (memory) ... can't assign resources (port) ... pci0: <PCI bus> on pcib0 ... (freebsd-stable) APM not working on Dell Latitude D600 ... pci0: <PCI bus> on pcib0 ... pci_cfgintr: 0:29 INTA BIOS irq 11 ... pccard0: ... <Parallel port bus> on ppc0 ... (freebsd-current) hang/panic of 5.2.1-RELEASE installation. ... "panic: interrupt from missing bus" ... SMAP type=01 base=0000000000000000 len=000000000009f400 ... pci_cfgintr: 0:3 INTA BIOS irq 11 ... can't assign resources (port) ... (freebsd-current) ACPI caused device timeout. ... pci0: <PCI bus> on pcib0 ... ppc0: parallel port not found. ... ahc0: No resources allocated. ... (freebsd-current)