Re: bluetooth blues

From: Randy Bush (randy_at_psg.com)
Date: 01/14/04

  • Next message: Randy Bush: "Re: bluetooth blues"
    To: Maksim Yevmenkin <m_evmenkin@yahoo.com>
    Date: Wed, 14 Jan 2004 09:51:56 -0800
    
    

    > 1) reboot your laptop
    > 2) attach bluetooth device and execute rc.bluetooth start <device>
    > 3) verify that bluetooth works, i.e. try inquiry, l2ping etc.
    > 4) stop the stack, i.e. execute rc.bluetooth stop <device>
    > 5) suspend
    > 6) resume
    > 7) look into /var/log/messages (just to see if you got something
    > related to the bluetooth device)
    Jan 14 09:44:29 roam kernel: pcib0: slot 29 INTA is routed to irq 11
    Jan 14 09:44:29 roam kernel: pcib0: slot 29 INTB is routed to irq 11
    Jan 14 09:44:29 roam kernel: pcib0: slot 29 INTC is routed to irq 11
    Jan 14 09:44:31 roam kernel: pcib0: slot 29 INTD is routed to irq 11
    Jan 14 09:44:31 roam kernel: pcib0: slot 31 INTB is routed to irq 11
    Jan 14 09:44:31 roam last message repeated 2 times
    Jan 14 09:44:31 roam kernel: pcib1: slot 0 INTA is routed to irq 11
    Jan 14 09:44:31 roam kernel: usb0: controller did not reset
    Jan 14 09:44:31 roam kernel: usb0: cannot start
    Jan 14 09:44:31 roam kernel: usb1: controller did not reset
    Jan 14 09:44:31 roam kernel: usb1: cannot start
    Jan 14 09:44:31 roam kernel: usb2: controller did not reset
    Jan 14 09:44:31 roam kernel: usb2: cannot start
    Jan 14 09:44:31 roam kernel: pcib2: slot 0 INTA is routed to irq 11
    Jan 14 09:44:31 roam kernel: pcib2: slot 0 INTB is routed to irq 11
    Jan 14 09:44:31 roam kernel: pcib2: slot 1 INTA is routed to irq 11
    Jan 14 09:44:31 roam kernel: pcib2: slot 2 INTA is routed to irq 11
    Jan 14 09:44:31 roam kernel: wakeup from sleeping state (slept 00:00:29)
    Jan 14 09:44:31 roam kernel: uhub0: illegal enable change, port 1
    Jan 14 09:44:31 roam kernel: uhub1: illegal enable change, port 1
    Jan 14 09:44:31 roam kernel: uhub2: illegal enable change, port 1
    Jan 14 09:44:31 roam kernel: ubt0: at uhub2 port 1 (addr 2) disconnected
    Jan 14 09:44:31 roam kernel: ubt0: detached
    Jan 14 09:44:31 roam kernel: em0: Link is up 1000 Mbps Full Duplex
    Jan 14 09:44:31 roam kernel: usb0: host system error
    Jan 14 09:44:31 roam kernel: usb0: host controller process error
    Jan 14 09:44:31 roam kernel: usb0: host controller halted
    Jan 14 09:44:31 roam kernel: usb1: host system error
    Jan 14 09:44:31 roam kernel: usb1: host controller process error
    Jan 14 09:44:31 roam kernel: usb1: host controller halted
    Jan 14 09:44:31 roam kernel: usb2: host system error
    Jan 14 09:44:31 roam kernel: usb2: host controller process error
    Jan 14 09:44:31 roam kernel: usb2: host controller halted
    Jan 14 09:44:32 roam kernel: uhub0: port 1 reset failed
    Jan 14 09:44:32 roam kernel: uhub1: port 1 reset failed
    Jan 14 09:44:32 roam kernel: uhub2: port 1 reset failed

    > 8) start the stack, i.e. execute rc.bluetooth start <device>

    # l2ping -a rb66
    l2ping: Could not connect socket, dst bdaddr=00:60:57:af:7a:8e: Network is down

    > if this does not crash then i would assume that it is my problem
    > and not usb fault.

    that sure is a lot of whining about usb in the resume log

    randy

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  • Next message: Randy Bush: "Re: bluetooth blues"

    Relevant Pages

    • usb0: cannot start
      ... usb0: host system error ... usb0: host controller process error ... usb1: host system error ... usb2: host system error ...
      (freebsd-current)
    • ATAng suspend/resume support broken
      ... usb0: host system error ... usb0: host controller process error ... usb2: resume detect ... battery initialization failed, giving up ...
      (freebsd-current)