Kernel panic, pcmcia cardbus 32 bits

From: Gregory Poudrel (chojin_at_chojin.info)
Date: 01/31/04

  • Next message: Melvyn Sopacua: "Re: max blockdevice/filesystem size?" 
    To: freebsd-current@freebsd.org
Date: Sat, 31 Jan 2004 01:43:10 +0100

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Hello,

    during making kerbel for 5.2 p1 I got a kernel panic due to my network card I
    guess.
    I was doing cvsup :)

    Network card is a PCMCIA Peabird cardbus 32 bits 10/100 mbps on a laptop
    here is dmesg:
    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
        root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a33244.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Pentium II/Pentium II Xeon/Celeron (366.60-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x66a Stepping = 10
      Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    real memory = 167706624 (159 MB)
    avail memory = 153280512 (146 MB)
    Pentium Pro MTRR support enabled
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <NEC ND000008> on motherboard
        ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.DOCK._REG]
    (Node 0xc236aea0), AE_NOT_EXIST
    acpi0: could not initialise PciConfig handler: AE_NOT_EXIST
    device_probe_and_attach: acpi0 attach returned 6
    pcibios: BIOS version 2.10
    Using $PIR table, 6 entries at 0xc00f5620
    pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on
    motherboard
    pci0: <PCI bus> on pcib0
    pci_cfgintr: 0:2 INTA BIOS irq 10
    pci_cfgintr: 0:4 INTA BIOS irq 5
    pci0: <display, VGA> at device 2.0 (no driver attached)
    cbb0: <RF5C478 PCI-CardBus Bridge> at device 3.0 on pci0
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    pci_cfgintr: 0:3 INTA routed to irq 10
    cbb0: [MPSAFE]
    cbb1: <RF5C478 PCI-CardBus Bridge> at device 3.1 on pci0
    cardbus1: <CardBus bus> on cbb1
    pccard1: <16-bit PCCard bus> on cbb1
    pci_cfgintr: 0:3 INTB routed to irq 5
    cbb1: [MPSAFE]
    pci0: <multimedia, audio> at device 4.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on
    pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata0: [MPSAFE]
    ata1: at 0x170 irq 15 on atapci0
    ata1: [MPSAFE]
    uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff at device
    7.2 on pci0
    pci_cfgintr: 0:7 INTD routed to irq 9
    usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
    orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model GlidePoint, device ID 0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
    0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/8 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0c02> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0401> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <AUI0200> can't assign resources (irq)
    Timecounter "TSC" frequency 366597051 Hz quality 800
    Timecounters tick every 10.000 msec
    rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021ff
    irq 5 at device 0.0 on cardbus1
    rl0: Ethernet address: 00:40:f4:1c:3e:c9
    miibus0: <MII bus> on rl0
    rlphy0: <RealTek internal media interface> on miibus0
    rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    GEOM: create disk ad0 dp=0xc23b9760
    ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
    acd0: CDROM <MATSHITA CR-175> at ata1-master PIO4
    Mounting root from ufs:/dev/ad0s1a
    WARNING: / was not properly dismounted
    WARNING: /usr was not properly dismounted
    WARNING: /var was not properly dismounted

    Here is the kernel panic message:
    rl0: discard oversize frame (ether type 3ec9 flags 3 len 33520 > max 1514)

    Fatal trap 12: page fault while in kernel mode
    cpuid = 0; apic id = 00
    fault virtual address = 0xcb0fb000
    fault code = supervisor read, page not present
    instructor pointer = 0x8:0xc07d9276
    stack pointer = 0x10:0xca2a1c30
    frame pointer = 0x10:0xca2a1c5c
    code segment = base 0x0, limit 0xfffff, type 0x1b
                            = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 16 (irq5: cbb1)
    trap number = 12
    panic: page fault
    cpuid = 0;

    syncing disc, buffers remaining... 1586 1586 1586 1586 1586 1586

    Hope it helps.

    - --
    Gregory Poudrel
    (Chojin)
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.2.3 (GNU/Linux)

    iD8DBQFAGvoe+OqMRW168TIRArkEAJ4/H5lADRDV0uLwWdMaBJ1lQ02w7QCaAvLP
    r+bNeraBdf2D/24S0pjSfg0=
    =P7G7
    -----END PGP SIGNATURE-----

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Melvyn Sopacua: "Re: max blockdevice/filesystem size?"
    • Quantcast