worst FreeBSD EVAR. (crash on boot)
From: Alfred Perlstein (alfred_at_freebsd.org)
Date: 02/28/04
- Previous message: Bruce Evans: "Re: mdconfig unable to allocate memory"
- Next in thread: Robert Watson: "Re: worst FreeBSD EVAR. (crash on boot)"
- Reply: Robert Watson: "Re: worst FreeBSD EVAR. (crash on boot)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 28 Feb 2004 04:42:35 -0800 To: current@freebsd.org
So I'm updating from a Dec 5th kernel to today's so as to hopefully
restore the cool pre-Dec 5th ACPI behaviour which was:
Hitting the power button did an orderly shutdown.
Instead of Dec 5th's behaviour which is:
Randomly (well mostly when I fat finger ^A-n to switch screens)
failing to suspend to disk and then completely locking up.
Hitting power button does an immediate shutdown.. like power OFF,
no orderly shutdown, fsck at boot required, baby jesus cries etc.
Well now I have a kernel that won't even boot, here's the dmesg
from the Dec 5th kernel with a marker where the panic happens on
the newer kernel (noted by: <<<PANIC HERE ON NEW KERNEL>>) any
help would be appreciated.
Machine is an old laptop, a Dell Latitude, celeron 300, 128 megs
of ram. It seems to crash both with and without ACPI loaded now.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Fri Dec 5 18:57:50 PST 2003
root@lappy.reserved:/usr/obj/usr/src/sys/lappy
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc08d4000.
Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc08d4204.
Calibrating clock(s) ... i8254 clock: 1193044 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 297786292 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000007d89fff, 118898688 bytes (29028 pages)
avail memory = 120684544 (115 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc06e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 00 02 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
0d 01 0e 01 10 01 11 01 12 01 13 01 14 01 15 01
VESA: 22 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc07e2402 (1000022)
VESA: MagicMedia 256 AV 48K
VESA: NeoMagic MagicMedia 256 AV 01.0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fbd20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 13 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 D 0x62 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f4000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:3 INTA BIOS irq 11
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:3 INTA BIOS irq 11
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00000860, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ece0, size 5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:7 INTD BIOS irq 11
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00000840, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfd000000-0xfeffffff
pcib1: prefetched decode 0xf9000000-0xfbffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base fb000000, size 24, enabled
map[14]: type 1, range 32, base fdc00000, size 22, enabled
map[18]: type 1, range 32, base fdb00000, size 20, enabled
<<<PANIC HERE ON NEW KERNEL>>
trap 12, fault addr: 0xb1e2
code @0xc00fc492 cmpb %cs:0xb1e2, %bh
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 1:0 INTA BIOS irq 11
found-> vendor=0x10c8, dev=0x0005, revid=0x12
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base fac00000, size 22, enabled
map[14]: type 1, range 32, base fda00000, size 20, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 1:0 INTB BIOS irq 5
found-> vendor=0x10c8, dev=0x8005, revid=0x12
bus=1, slot=0, func=1
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib1: device pcm0 requested decoded memory range 0xfda00000-0xfdafffff
pcm0: <NeoMagic 256AV> mem 0xfda00000-0xfdafffff,0xfac00000-0xfaffffff irq 5 at device 0.1 on pci1
pcib1: device pcm0 requested decoded memory range 0xfac00000-0xfaffffff
pcib1: device pcm0 requested decoded memory range 0xfda00000-0xfdafffff
pcm0: buftop is 0x0027ec00
pcm0: buftop is changed to 0x0027ec00
pcm0: <SigmaTel STAC9704 AC97 Codec (id = 0x83847605)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: rec buf 0xc97fec00
pcm0: play buf 0xc97fac00
cbb0: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac1c104c 0x02100007 0x06070001 0x00822008
0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x00000000 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x2024f020 0x00000000 0x00000000 0x01261222
0x90: 0x616682c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x0000001b 0x00000007
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac1c104c 0x02100007 0x06070001 0x00822008
0x10: 0x88001000 0x020000a0 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x00000000 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x2024d020 0x00000000 0x00000000 0x01261222
0x90: 0x616682c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x0000001b 0x00000007
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pcm: pcm0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 248 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100a0000-0x100bffff, size=0x20000
PNP0c01: adding io range 0x800-0x83f, size=0x40, align=0x1
PNP0c01: adding io range 0x840-0x84f, size=0x10, align=0x1
PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1
PNP0c01: adding io range 0xe0-0xe1, size=0x2, align=0x1
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0xed000000-0xedffffff, size=0x1000000
PNP0c01: adding io range 0xf400-0xf4fe, size=0xff, align=0x1
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 7 device ID PNP0f13 (130fd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 10 device ID PNP0c04 (040cd041)
PNP0e03: adding irq mask 0x20
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8
PNP0700: adding dma mask 0x4
pnpbios: handle 15 device ID PNP0700 (0007d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (port)
unknown: <PNP0c01> at port 0x3f0-0x3f1,0x840-0x84f,0x800-0x83f iomem 0x100a0000-0x100bffff,0xfffe0000-0xffffffff,0xf0000-0xfffff,0x100000-0x7ffffff,0-0x9ffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0e03> can't assign resources (irq)
unknown: <PNP0e03> at port 0x3e0-0x3e1 irq 5 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
ppc1: using extended I/O port range
ppc1: ECP SPP ECP+EPP SPP
ppc1: <ECP parallel printer port> at port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on isa0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
Device configuration finished.
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 297786292 Hz quality -1000
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x00
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: Addtron, AWP-100 Wireless PCMCIA, Version 01.02,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0: <Addtron AWP-100 Wireless PCMCIA> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: 802.11 address: 00:90:d1:07:34:2e
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc208c360
ad0: <IBM-DBCA-204860/BC3OA85F> ATA-4 disk at ata0-master
ad0: 4645MB (9514260 sectors), 10068 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <SAMSUNG CD-ROM SN-124/q008> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):591/254/63 s:63 l:9510417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 4869333504 end 4869365759
GEOM: Configure ad0s1a, start 0 length 125829120 end 125829119
GEOM: Configure ad0s1b, start 125829120 length 268435456 end 394264575
GEOM: Configure ad0s1c, start 0 length 4869333504 end 4869333503
GEOM: Configure ad0s1e, start 394264576 length 125829120 end 520093695
GEOM: Configure ad0s1f, start 520093696 length 4349239808 end 4869333503
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
o get around
some grossness w
-- - Alfred Perlstein - Research Engineering Development Inc. - email: bright@mu.org cell: 408-480-4684 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
- Previous message: Bruce Evans: "Re: mdconfig unable to allocate memory"
- Next in thread: Robert Watson: "Re: worst FreeBSD EVAR. (crash on boot)"
- Reply: Robert Watson: "Re: worst FreeBSD EVAR. (crash on boot)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
