Re: cardbus trouble

From: Dylan Wylie (d.wylie_at_hccnet.nl)
Date: 05/09/04

  • Next message: Bruce Evans: "Re: 5.x w/auto-maxusers has insane kern.maxvnodes" 
    To: "M. Warner Losh" <imp@bsdimp.com>, freebsd-current@freebsd.org
Date: Sun, 09 May 2004 10:52:10 +0200

    Yes, it used to work perfectly.
    The dmesg with both cardbus and cbb debuging enabled is included below.
    Again, it shows insertion of the cardbus card which fails, followed by the pccard
    card, which succeedes.
    I also don't remember any 'lazy allocation' with the working builds.

    Dylan

    On 8 May 2004 at 17:25, M. Warner Losh wrote:

    > [[ this may be a duplicate ]]
    >
    > In message: <409D614D.7983.2B9BBDF@localhost>
    > "Dylan Wylie" <d.wylie@hccnet.nl> writes:
    > : hm..
    > : I'm afraid I only have the one 3com cardbus card.
    > : well...more than one,but identical ones.
    > : Other pccard cards work though.
    > : I could get my hands on some other ones in the coming days.
    > : Is any-one else seeing this?
    > : If not, I'll shut-up for now until I get a chance to try other cards.
    >
    > It used to work for you, right? if you set hw.cbb.debug=1 and
    > hw.cardbus.debug=1 what output do you get?
    >
    > Warner
    >

    #dmesg starts here
    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-CURRENT #3: Sat May 8 23:21:31 CEST 2004
        root@blankerdieblank:/usr/obj/usr/src/sys/PRESARIO
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc086c000.
    Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc086c1f4.
    Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc086c2a8.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086c354.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Pentium II/Pentium II Xeon/Celeron (466.06-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x665 Stepping = 5
      
    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PG
    E,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    real memory = 192872448 (183 MB)
    avail memory = 179036160 (170 MB)
    Pentium Pro MTRR support enabled
    random: <entropy source, Software, Yarrow>
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <PTLTD RSDT> on motherboard
    acpi0: [GIANT-LOCKED]
    pcibios: BIOS version 2.10
    acpi0: Power Button (fixed)
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
    cpu0: <ACPI CPU (3 Cx states)> on acpi0
    acpi_tz0: <Thermal Zone> on acpi0
    acpi_button0: <Power Button> on acpi0
    acpi_acad0: <AC Adapter> on acpi0
    acpi_cmbat0: <Control Method Battery> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pcib0: slot 7 INTD is routed to irq 11
    pcib0: slot 7 INTC is routed to irq 9
    pcib0: slot 7 INTC is routed to irq 9
    pcib0: slot 9 INTA is routed to irq 11
    agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on
    pci0
    agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
    pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ -
    AE_NOT_FOUND
    pci1: <ACPI PCI bus> on pcib1
    pci1: <display, VGA> at device 0.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <VIA 82C686A UDMA66 controller> port 0x1820-0x182f,0x376,0x170-
    0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
    atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1820
    atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
    atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
    ata0: at 0x1f0 irq 14 on atapci0
    atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
    atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
    ata1: at 0x170 irq 15 on atapci0
    uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 at device 7.2 on
    pci0
    uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
    uhci0: [GIANT-LOCKED]
    usb0: <VIA 83C572 USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    isab1: <PCI-ISA bridge> at device 7.4 on pci0
    device_probe_and_attach: isab1 attach returned 6
    pcm0: <VIA VT82C686A> port 0x1830-0x1833,0x1834-0x1837,0x1000-0x10ff irq 9
    at device 7.5 on pci0
    pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
    pcm0: [GIANT-LOCKED]
    pcm0: <Analog Devices AD1881 AC97 Codec>
    pci0: <simple comms> at device 7.6 (no driver attached)
    pci0: <simple comms> at device 9.0 (no driver attached)
    cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
    cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0000000
    cbb0: Found memory at f0000000
    cbb0: Secondary bus is 0
    cbb0: Secondary bus set to 1 subbus 2
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    pcib0: slot 10 INTA is routed to irq 9
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: model IntelliMouse, device ID 3
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-
    0x3f5 irq 6 drq 2 on acpi0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    ppc0 port 0x378-0x37f irq 7 on acpi0
    ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
    ppbus0: <Parallel port bus> on ppc0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    acpi_ec0: <Embedded Controller: GPE 0x6> port 0x66,0x62 on acpi0
    orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 466062155 Hz quality 800
    Timecounters tick every 10.000 msec
    ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny,
    logging limited to 10 packets/entry by default
    Status is 0x30000006
    ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA66
    acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302> at ata1-master UDMA33
    Mounting root from ufs:/dev/ad0s1a
    Status is 0x30000820
    cbb0: card inserted: event=0x00000000, state=30000820
    cbb0: cbb_power: 3V
    cardbus0: Resource not specified in CIS: id=10, size=800000
    cardbus0: Resource not specified in CIS: id=14, size=20000
    cardbus0: Resource not specified in CIS: id=18, size=800000
    cardbus0: <display, VGA> at device 0.0 (no driver attached)
    cbb0: cbb_power: 0V
    cbb0: CardBus card activation failed
    Status is 0x30000086
    Status is 0x30000410
    cbb0: card inserted: event=0x00000000, state=30000410
    cbb_pcic_socket_enable:
    cbb0: cbb_power: 5V
    cbb_pcic_socket_enable:
    cbb0: cbb_power: 0V
    cbb0: cbb_power: 5V
    xe0: <Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16> at port 0x100-
    0x10f irq 9 function 0 config 1 on pccard0
    xe0: [GIANT-LOCKED]
    xe0: Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16, version
    0x45/0x04, 100Mbps capable
    xe0: Ethernet address: 00:a0:c9:38:b7:0c
    Status is 0x30000016
    xe0: detached
    cbb_pcic_socket_disable
    #dmesg ends here
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Bruce Evans: "Re: 5.x w/auto-maxusers has insane kern.maxvnodes"