ATA_IDENTIFY no interrupt

From: Sascha Holzleiter (sascha_at_daemonground.de)
Date: 05/21/04

  • Next message: Mikhail Teterin: "Re: QMail and SoftUpdates" 
    Date: Fri, 21 May 2004 16:31:32 +0200
To: freebsd-current@freebsd.org

    Hi,

    I just tried to install a 5.2.1 on several remote servers for testing
    perpose and came across this error with some server models.

    While booting the harddisk isn't found properly but the drive is
    detected when issuing a 'atacontrol reinit' command after the system has
    finished booting.

    test26# atacontrol list
    ATA channel 0:
        Master: no device present
        Slave: no device present
    ATA channel 1:
        Master: no device present
        Slave: no device present

    test26# atacontrol reinit 0
    Master: ad0 <ST380011A/3.54> ATA/ATAPI rev 6
    Slave: no device present

    I already tried the usual ACPI disable but without success...

    A verbose boot log is located at: http://root-login.org/verbose.log 

    --
  Sascha
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
  • Next message: Mikhail Teterin: "Re: QMail and SoftUpdates"

    Relevant Pages

    • Re: boot.ini
      ... "gadya" wrote: ... | Path in boot.ini affected by which drive you are booting from? ...
      (microsoft.public.windowsxp.basics)
    • Re: boot.ini
      ... Regardless of what you are booting from, the primary of channel 1 is ... Cable select settings are more physical. ... MCT, Certified Cheese Master ... booting from the slave is the master rdisk=1 and the slave rdisk= 0? ...
      (microsoft.public.windowsxp.basics)
    • Problem after HD Upgrade?
      ... Upon booting, the system BIOS can ... recognize the new HD as Master but still boot from the ... old HD which is already set as Slave. ...
      (microsoft.public.windowsxp.general)
    • Re: "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" Error Message
      ... When you have the drive connected as slave and booting into XP (with your ... Are you looking in the correct My Documents directory. ... | I have had WinXP Pro installed on an 80G WD harddrive since April. ...
      (microsoft.public.windowsxp.general)
    • Re: Slave Hard-Drive probs
      ... XP Pro has been set as Master and old XP Home ... With your "old" drive connected to your XP machine as Slave and with the ... boot to the PM drive, ... booting to a Desktop. ...
      (microsoft.public.windowsxp.general)