Attache USB flash drive

From: Brian Rogers (burpmaster_at_truffula.net)
Date: 05/30/04

  • Next message: Kris Kennaway: "stray irq13 at runtime" 
    Date: Sat, 29 May 2004 19:46:19 -0700
To: freebsd-current@freebsd.org

    I recently got a 128 MB USB flash drive, and when I plug it in, nothing
    shows up in /dev. It does show up in dmesg, however. Then, slowly over
    time, I get a repeating sequence of three error messages. If I unplug
    the device, it panics in uhci_device_ctrl_start with a null
    dereference. It looks like xfer->pipe is null.

    The system fails to sync and doesn't make a crash dump, but I'm guessing
    the real problem occurs earlier anyway. What can I do?

    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-CURRENT #4: Sat May 29 16:31:40 PDT 2004
        brian@brian:/usr/obj/usr/src/sys/MYKERN
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc07e4000.
    Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc07e4244.
    Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07e42f4.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(tm) XP 1800+ (1533.40-MHz 686-class CPU)
      Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
      Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
      AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
    real memory = 1073676288 (1023 MB)
    avail memory = 1045340160 (996 MB)
    ACPI APIC Table: <AMIINT VIA_K7 >
    ioapic0 <Version 0.3> irqs 0-23 on motherboard
    random: <entropy source, Software, Yarrow>
    Pentium Pro MTRR support enabled
    acpi0: <AMIINT VIA_K7> on motherboard
    acpi0: [GIANT-LOCKED]
    pcibios: BIOS version 2.10
    acpi0: Power Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    cpu0: <ACPI CPU> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pcib1: slot 0 INTA is routed to irq 16
    pci1: <display, VGA> at device 0.0 (no driver attached)
    dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xe800-0xe8ff mem 0xdfffff00-0xdfffffff irq 17 at device 6.0 on pci0
    miibus0: <MII bus> on dc0
    dcphy0: <Intel 21143 NWAY media interface> on miibus0
    dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    dc0: Ethernet address: 00:a0:cc:33:8e:1b
    dc0: [GIANT-LOCKED]
    pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 17 at device 10.0 on pci0
    pcm0: <Cirrus Logic CS4297A AC97 Codec>
    pcm0: [GIANT-LOCKED]
    uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.0 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <VIA 83C572 USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
    ums0: 3 buttons and Z dir.
    ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 3, iclass 7/1
    ulpt0: using bi-directional mode
    uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.1 on pci0
    uhci1: [GIANT-LOCKED]
    usb1: <VIA 83C572 USB controller> on uhci1
    usb1: USB revision 1.0
    uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.2 on pci0
    uhci2: [GIANT-LOCKED]
    usb2: <VIA 83C572 USB controller> on uhci2
    usb2: USB revision 1.0
    uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    pci0: <serial bus, USB> at device 16.3 (no driver attached)
    isab0: <PCI-ISA bridge> at device 17.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: at 0x170 irq 15 on atapci0
    acpi_button1: <Sleep Button> on acpi0
    fdc0: I/O to control range incorrect
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    sio1 port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    fdc0: I/O to control range incorrect
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    orm0: <Option ROM> at iomem 0xc0000-0xce7ff on isa0
    pmtimer0 on isa0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 1533396263 Hz quality 800
    Timecounters tick every 10.000 msec
    acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
    ad0: 114473MB <WDC WD1200JB-00CRA0> [232581/16/63] at ata0-master UDMA100
    ad1: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-slave UDMA100
    ad2: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata1-master UDMA100
    acd0: CDRW <TDK DVDRW420N> at ata1-slave UDMA33
    Mounting root from ufs:/dev/ad0s1a
    umass0: PNY Attache 2.0, rev 2.00/2.00, addr 2
    umass0: BBB reset failed, TIMEOUT
    umass0: BBB bulk-in clear stall failed, TIMEOUT
    umass0: BBB bulk-out clear stall failed, TIMEOUT
    umass0: BBB reset failed, TIMEOUT
    umass0: BBB bulk-in clear stall failed, TIMEOUT
    umass0: BBB bulk-out clear stall failed, TIMEOUT
    umass0: BBB reset failed, TIMEOUT
    umass0: BBB bulk-in clear stall failed, TIMEOUT
    umass0: BBB bulk-out clear stall failed, TIMEOUT
    umass0: BBB reset failed, TIMEOUT
    umass0: BBB bulk-in clear stall failed, TIMEOUT
    umass0: BBB bulk-out clear stall failed, TIMEOUT
    umass0: BBB reset failed, TIMEOUT
    umass0: BBB bulk-in clear stall failed, TIMEOUT
    umass0: BBB bulk-out clear stall failed, TIMEOUT

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Kris Kennaway: "stray irq13 at runtime"
    • Quantcast