ndis - NetGear HA501 - kernel panic

From: Drew Broadley (drew_at_corrupt.co.nz)
Date: 05/31/04

  • Next message: Peter Schuller: "Re: config/kernel version mismatch after cvsup" 
    Date: Mon, 31 May 2004 21:03:40 +1200
To: current@freebsd.org

    This is what comes up when I use the XP and 2k drivers for the NetGear
    HA501 802.11a card and insert:
    >>>>>>>>>>>>>>>>>>>
    ndis0: <NETGEAR HA501 Wireless Adapter> mem 0x80000000-0x8000ffff irq 11
    at device 0.0 on cardbus0
    ndis0: [GIANT-LOCKED]
    >>>>>>>>>>>>>>>>>>>

    This is when I perform "ifconfig ndis0 up SSID GUYAVE"
    >>>>>>>>>>>>>>>>>>>
    can't re-use a leaf (MapRegisters)!
    can't re-use a leaf (clist)!
    can't re-use a leaf (QoS)!
    can't re-use a leaf (tpc)!
    can't re-use a leaf (TurboEnable)!
    can't re-use a leaf (beaconInterval)!
    can't re-use a leaf (bssType)!
    can't re-use a leaf (privacyInvoked)!
    can't re-use a leaf (sleepMode)!
    can't re-use a leaf (FragThreshold)!
    can't re-use a leaf (RTSThreshold)!
    can't re-use a leaf (rateCtrlEnable)!
    can't re-use a leaf (SmeEnable)!
    can't re-use a leaf (TransmitRate)!
    can't re-use a leaf (bkScanEnable)!
    ndis0: NDIS API version: 5.0
    ndis0: Ethernet address: 00:30:ab:15:b6:cf
    ndis0: 11a rates:
    ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    ndis0: set filter failed: 6
    ndis0: set filter failed: 6
    ndis0: set filter failed: 6
    ndis0: link up
    ndis0: no matching rate for: 48
    >>>>>>>>>>>>>>>>>>>

    This is when I perform "ifconfig ndis0 down"
    >>>>>>>>>>>>>>>>>>>
    Fatal trap 12: page fault while in kernel mode
    fault virtual address = 0xb85b58
    fault code = supervisor read, page not present
    instruction pointer = 0x8:0xc07cbdf0
    stack pointer = 0x10:0xe7f30a9c
    frame pointer = 0x10:0xe7f30aac
    code segment = base 0x0, limit 0xfffff, type 0x1b
                            = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 792 (ifconfig)
    trap number = 12
    panic: page fault
    at line 815 in file /usr/src/sys/i386/i386/trap.c
    >>>>>>>>>>>>>>>>>>>

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Peter Schuller: "Re: config/kernel version mismatch after cvsup"

    Relevant Pages

    • Re: if_ndis kernel panic
      ... can't re-use a leaf! ... can't re-use a leaf (ChannelB)! ... can't re-use a leaf (EncryptionKey1)! ...
      (freebsd-current)
    • Newbie: PCI modem grief
      ... sio0: configured irq 19 not in bitmap of probed irqs 0 ... <Lucent kermit based PCI Modem> port 0xd800-0xd8ff, 0xd900-0xd9ff,0xd5a8-0xd5af mem 0xfe9ded00-0xfe9dedff irq 22 at device 1.0 on pci2 ... can't re-use a leaf! ...
      (freebsd-questions)
    • Re: Project Evil: The Evil Continues
      ... cbg0: NDIS API version: 5.0 ... It would be really great to have this card ... can't re-use a leaf! ...
      (freebsd-current)
    • cant re-use a leaf ?
      ... can't re-use a leaf! ... <Lava Computers Quattro-PCI serial port> on puc0 ... unable to activate interrupt in fast mode - using normal mode ...
      (freebsd-current)
    • Re: SIO Interrupt storms and unhandled interrupts
      ... Also fixed in this are those "cant re-use leafs" at bootup time. ... is seen as a PUC device now.... ... TSC clock: 1002280114 Hz ... -can't re-use a leaf! ...
      (freebsd-current)