-current panic: kse/thread mismatch?

From: Mike Schreckengost (mrpolitics_at_hotmail.com)
Date: 07/13/04

  • Next message: Andre Guibert de Bruet: "Re: CPUTYPE=p4 & kernel config" 
    To: freebsd-current@freebsd.org
Date: Mon, 12 Jul 2004 21:02:29 -0400

    Hi everyone,
        Within the past week or so, I have been experiencing severe stability
    problems (i.e., hard lockups) with FreeBSD-current. I am using a stock
    GENERIC kernel (with the exception of 'device atapicam'). Usually these
    lockups occur while I am using Mozilla, XMMS or other X-based applications,
    and until tonight I have been unable to get a kernel panic or other useful
    information to help in diagnosing the problem. This evening, I logged into
    X-Windows and started to play a music file in XMMS. I switched back to the
    text console and captured (by hand) the following panic about 1m30s later:

    panic: kse/thread mismatch
    cpuid = 1;
    boot() called on cpu#1

    syncing disks, buffers remaining... panic: pmap_invalidate_range: interrupts
    disabled
    cpuid=1;
    boot() called on cpu#1
    Uptime: 6m6s

    The system locked up without dropping me to the debugger, so I am unable to
    provide any useful traceback information, etc ... sorry. I am, however,
    including a copy of my dmesg output from a kernel built earlier tonight ...
    hopefully this will be enough information to help someone diagnose this
    problem. If I can provide any further assistance, don't hesitate to ask. And
    as always, kudos to all of the FreeBSD developers for your hard work and
    patience.

    Regards,
    Mike

    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2-CURRENT #3: Mon Jul 12 15:46:43 EDT 2004
        root@ulb.neo.rr.com:/usr/obj/usr/src/sys/ULB
    WARNING: WITNESS option enabled, expect reduced performance.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(tm) MP 2100+ (1733.41-MHz 686-class CPU)
      Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
      
    Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
    OV,PAT,PSE36,MMX,FXSR,SSE>
      AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
    real memory = 1073217536 (1023 MB)
    avail memory = 1040695296 (992 MB)
    ACPI APIC Table: <PTLTD APIC >
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    cpu0 (BSP): APIC ID: 1
    cpu1 (AP): APIC ID: 0
    MADT: Forcing active-low polarity and level trigger for SCI
    ioapic0 <Version 1.1> irqs 0-23 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <PTLTD RSDT> on motherboard
    acpi0: [GIANT-LOCKED]
    acpi0: Power Button (fixed)
    acpi0: Sleep Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff
    iomem
    0xd8000-0xdbfff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    agp0: <AMD 762 host to AGP bridge> port 0x1010-0x1013 mem
    0xeb200000-0xeb200fff,
    0xec000000-0xefffffff at device 0.0 on pci0
    pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    pci1: <display, VGA> at device 5.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <AMD 768 UDMA100 controller> port
    0xf000-0xf00f,0x376,0x170-0x177,0x3f6
    ,0x1f0-0x1f7 at device 7.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: at 0x170 irq 15 on atapci0
    pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
    pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
    pci2: <ACPI PCI bus> on pcib2
    ohci0: <OHCI (generic) USB controller> mem 0xe9000000-0xe9000fff irq 19 at
    devic
    e 0.0 on pci2
    ohci0: [GIANT-LOCKED]
    usb0: OHCI version 1.0, legacy support
    usb0: <OHCI (generic) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    atapci1: <HighPoint HPT370 UDMA100 controller> port
    0x2000-0x20ff,0x2820-0x2823,
    0x2828-0x282f,0x2824-0x2827,0x2830-0x2837 irq 16 at device 4.0 on pci2
    ata2: at 0x2830 on atapci1
    ata3: at 0x2828 on atapci1
    ohci1: <NEC uPD 9210 USB controller> mem 0xe9001000-0xe9001fff irq 17 at
    device
    5.0 on pci2
    ohci1: [GIANT-LOCKED]
    usb1: OHCI version 1.0
    usb1: <NEC uPD 9210 USB controller> on ohci1
    usb1: USB revision 1.0
    uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 3 ports with 3 removable, self powered
    ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
    ums0: 3 buttons and Z dir.
    ohci2: <NEC uPD 9210 USB controller> mem 0xe9002000-0xe9002fff irq 18 at
    device
    5.1 on pci2
    ohci2: [GIANT-LOCKED]
    usb2: OHCI version 1.0
    usb2: <NEC uPD 9210 USB controller> on ohci2
    usb2: USB revision 1.0
    uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    uscanner0: Canon CanoScan, rev 1.00/1.00, addr 2
    pci2: <serial bus, USB> at device 5.2 (no driver attached)
    pcm0: <Creative EMU10K1> port 0x2800-0x281f irq 18 at device 6.0 on pci2
    pcm0: <SigmaTel STAC9708/11 AC97 Codec>
    pci2: <display, VGA> at device 7.0 (no driver attached)
    xl0: <3Com 3c980C Fast Etherlink XL> port 0x2400-0x247f mem
    0xe9003400-0xe900347
    f irq 18 at device 8.0 on pci2
    miibus0: <MII bus> on xl0
    ukphy0: <Generic IEEE 802.3u media interface> on miibus0
    ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl0: Ethernet address: 00:e0:81:22:5b:f4
    xl0: [GIANT-LOCKED]
    xl1: <3Com 3c980C Fast Etherlink XL> port 0x2480-0x24ff mem
    0xe9003800-0xe900387
    f irq 19 at device 9.0 on pci2
    miibus1: <MII bus> on xl1
    ukphy1: <Generic IEEE 802.3u media interface> on miibus1
    ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    xl1: Ethernet address: 00:e0:81:22:5b:f5
    xl1: [GIANT-LOCKED]
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    sio1 port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
    0x3f7,0x3f0-0
    x3f5 irq 6 drq 2 on acpi0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    orm0: <ISA Option ROMs> at iomem
    0xe0000-0xe3fff,0xcf800-0xcffff,0xcf000-0xcf7ff
    on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounters tick every 10.000 msec
    ata0-master: FAILURE - ATAPI_RESET no interrupt
    acd0: CDRW <Memorex DVD+R/RW 2.4x8AA> at ata0-master PIO4
    ad1: 114473MB <WDC WD1200BB-00CAA1> [232581/16/63] at ata0-slave UDMA100
    ata1-slave: FAILURE - ATAPI_RESET no interrupt
    ata1-master: FAILURE - ATAPI_RESET no interrupt
    afd0: REMOVABLE <IOMEGA ZIP 250 ATAPI> at ata1-master PIO3
    acd1: CDRW <CD-RW IDE5232> at ata1-slave PIO4
    ad4: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata2-master UDMA100
    ad6: 76319MB <WDC WD800BB-00CAA0> [155061/16/63] at ata3-master UDMA100
    cd0 at ata0 bus 0 target 0 lun 0
    cd0: <Memorex DVD+R/RW 2.4x8AA 1.51> Removable CD-ROM SCSI-0 device
    cd0: 16.000MB/s transfers
    cd0: cd present [2191232 x 2048 byte records]
    da0 at ata1 bus 0 target 0 lun 0
    da0: <IOMEGA ZIP 250 42.S> Removable Direct Access SCSI-0 device
    da0: 11.000MB/s transfers
    da0: 239MB (489532 512 byte sectors: 64H 32S/T 239C)
    cd1 at ata1 bus 0 target 1 lun 0
    cd1: <CDWRITER IDE5232 000F> Removable CD-ROM SCSI-0 device
    cd1: 16.000MB/s transfers
    cd1: \M-@\M-f\M^H\M-@`\M-,0\M-B\M-@v0\M-Bll\M-5\M-\<\M^@^\M-@F\^B\^H
    SMP: AP CPU #1 Launched!
    Mounting root from ufs:/dev/ad4s1a

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Andre Guibert de Bruet: "Re: CPUTYPE=p4 & kernel config"