Re: 5.2-CURRENT still not working on my mitac 8080

From: David W. Chapman Jr. (dwcjr_at_inethouston.net)
Date: 07/15/04

  • Next message: Robert Watson: "5.3-RELEASE TODO"
    Date: Thu, 15 Jul 2004 09:08:44 -0500
    To: John Baldwin <jhb@FreeBSD.org>
    
    
    

    John Baldwin wrote:

    >On Wednesday 14 July 2004 02:57 pm, David W. Chapman Jr. wrote:
    >
    >
    >>John Baldwin wrote:
    >>
    >>
    >>>On Wednesday 14 July 2004 09:25 am, David W. Chapman Jr. wrote:
    >>>
    >>>
    >>>>When I boot in safe mode here is the console output
    >>>>
    >>>>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
    >>>>$PIR: BIOS IRQ 10 for 1.4.INTA does not match link 0x61 irq 5
    >>>>pci0: <PCI bus> on pcib0
    >>>>
    >>>>
    >>>Look for a BIOS upgrade. It sounds like your BIOS has badly busted
    >>>interrupt routing.
    >>>
    >>>
    >>I think I can get one, I don't have a problem running 4.X though, would
    >>that be consistent with the problem you described?
    >>
    >>
    >
    >4.x isn't smart enough to ask the BIOS how to route interrupts from the BIOS
    >tables, it just assumes that the way it booted is ok.
    >
    >
    >
    Unfortunately I have just upgraded to the latest BIOS revision and the
    problem still exists. I guess I'm dead in the water as far as 5.x goes?

    
    

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  • Next message: Robert Watson: "5.3-RELEASE TODO"

    Relevant Pages

    • Re: XPE is frozen after leaving XPE without any user-input for a l
      ... amount of idle time for this symptom is vero long - over 15 days. ... If the BIOS is already configured to disable ... > consistent and reproduceable, it still sounds like a power-management issue. ... >>> STE, Windows Embedded Group ...
      (microsoft.public.windowsxp.embedded)
    • RE: PII SMP system hangs during boot with ACPI enabled
      ... On 02-Dec-2003 John Baldwin wrote: ... I upgraded the BIOS to the latest from Tyan's ... >> The system boots and runs fine if I disable ACPI either in loader.conf ... now the system boots and runs fine with ACPI ...
      (freebsd-current)
    • Re: A8N-E and 2GB of memory
      ... I have the latest BIOS. ... I found I had a defective module. ... > i think the revision E6 of the venice core fix that problem. ...
      (alt.comp.periphs.mainboard.asus)
    • Re: Interrupt storm on acpi0 occurred after madt.c change
      ... > John Baldwin wrote: ... >> BIOS to get a storm now. ... BIOS's that program level/hi and some want level/lo, ... BIOS writers suck. ...
      (freebsd-current)
    • Re: "A Disk Read Error Occured" error source
      ... The message comes from the NTFS boot sector loader. ... It can indicate incorrect CHS values passed to BIOS. ... If it is not consistent, it means marginal bad sectors in NTLDR. ...
      (comp.sys.ibm.pc.hardware.storage)